Recommended Class IV Hitch for 1991 Ford E-350
Question:
Im interested in the class IV trailer hitch for my 1991 Ford E350 van. My van was originally a handicap transport. The frame is 42 wide but does not have all the pre-drilled holes for attaching the hitch, and also has 2 protruding rivets on the spare tire cross support. Will I need a custom hitch and install? I can send pics and door tag if that helps.
asked by: Michael V
Expert Reply:
There is a custom fit Class IV hitch for your 1991 Ford E-350 van with a 42" wide frame; you'll want to use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14053. You may need to drill the holes if they aren't there, but this is designed to fit your E-350.
If you'll be towing with this hitch, you'll also need trailer wiring. For that I recommend using the Tekonsha # 18252 which is a simple, splice in kit that will give you a 4 way wiring harness. To complete your towing setup I recommend using the etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs # EBMK4 since it gives you a ball mount, 2 hitch balls (1-7/8" and 2"), hitch pin, clip and storage bag; this should allow you to cover a few different trailer setups you might encounter.
I've linked some review videos of these parts for you to have a look at, as well.
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Are the Mounting Hole Dimensions for Curt Trailer Hitch Receiver 14053
- Q&A: Mounting Hole Dimensions for the Curt Trailer Hitch Receiver # 14053
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Drop of Curt Class IV Trailer Hitch # 14053
- Q&A: The Frame Of My 1977 Ford Van Has Rivets On The Frame. Will The Curt # 14053 Still Fit?
- Q&A: Mounting Flange Length for the Curt Hitch part # 14053
- Q&A: Dimensions of Curt Trailer Hitch C14048 for Ford Cab and Chassis Trucks
- Q&A: B & W Hitch BWHDRH25124 Center Section Width
- Article: Trailer Tire Sizing
- Article: My Trailer Hitch Doesn't Fit
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: How to Choose the Right Trailer Hitch Class