Trailer Hitch Fit for 1993 Ford E-350 with 42 inch Frame

Question

Question:

I have a ford E350 with a 42inch frame width. Which hitch receivers will fit my frame?

asked by: Scott

0

Expert Reply:

Your 1993 Ford E-350 with a 42 inch frame has a standard dimension frame width so our Curt hitch part # 14053 would fit and work well. The other hitches listed at the attached link will also fit too.

expert reply by: Jameson C

0

Answer 1

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" (for the 4 rearmost) and 38-3/4" (for the 1 forward-most) and then from the edge of the receiver that measurement is either 4-1/2" or 17-3/4" depending on…

view full answer...

Answer 2

According to my contact in the Tech Services department at Curt Manufacturing, the drop, or distance between the top of the mounting flange of the #14053 Class IV hitch and the top of the receiver tube is exactly 2 inches. You can see this in the…

view full answer...

Answer 3

I spoke with my contact at Curt and he informed me that the distance between the bolt holes centers on this Curt Class IV Trailer Hitch Receiver, part #14053, is 38-1/2 inches. You would need to compare that distance to the your frame rails to see if…

view full answer...

Answer 4

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 5

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" and 38-3/4" width-wise and then from the center of the of the forwardmost to the rearmost is 13-1/4". Attached is a dimensional photo for you to reference. This…

view full answer...

Answer 6

Please refer to the included images I made showing measurements for Curt trailer hitch #C14048. This hitch is designed to fit 1999 to 2016 Ford cab and chassis model trucks. Those are the trucks sold without a bed and are then turned into service…

view full answer...

Answer 7

The distance between the mounting holes from side to side on the Draw Tite trailer hitch part #41945 are 38-1/2 inches. This hitch fits the following vehicles: 2004 - 2014 Ford Van E-150 2004 - 2014 Ford Van E-250 2004 - 2014 Ford Van E-350 2000 -…

view full answer...

Answer 8

In regards to the Curt Trailer Hitch Receiver part #C14048, the distance from the center of the front mounting hole to the center of the rear mounting hole is 17-1/4". The distance from the center of the mounting holes left to right is 31".…

view full answer...

Answer 9

While the body style of the Ford vans has changed quite a bit over the years luckily the frame has stayed basically the exact same so the Curt hitch part #14053 does fit Ford full size vans from 1975 through 2006. Here's complete list: 2004 -…

view full answer...

Answer 10

For your 1989 Ford E-350 van I recommend the Curt Trailer Hitch Receiver, part #14053. This is a Class lV trailer hitch and it has a 2 inch receiver opening. This hitch has a maximum gross trailer weight of 10,000 lbs and a maximum tongue weight of…

view full answer...

Answer 11

Good news, I can help you find a hitch that will fit your 1997 Ford E-350 Bus. The fact that this is a bus means that the cab is a Ford E-350 but the chassis is not the same as the standard van chassis. This means that you will need a bolt-on or…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...