What is the Distance Between Bolt Holes on the Curt Trailer Hitch # 14053

Question

Question:

Can you please provide the bolt hole width dimension for the the Curt hitch 14053. I have a 2003 Ford E450 chassis Class C motor home and would like to see if this fits, I dont want adjustable hitch since it is rated only at 5000lbs. thank you

asked by: Kevin C

0

Expert Reply:

I spoke with my contact at Curt and he informed me that the distance between the bolt holes centers on this
Curt Class IV Trailer Hitch Receiver, part # 14053, is 38-1/2 inches.

I attached installation instructions below for this product also to give you a better idea of how this hitch installs.

expert reply by: Jameson C

0

Answer 1

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 2

I went and grabbed both hitches that you referenced to get the dimensions you asked about. If you check out all the attached pictures you will see the dimensions you are looking for the Curt #C14006 and #C15323.

view full answer...

Answer 3

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

view full answer...

Answer 4

I have a solution for you, but there is not a Class III custom fit hitch available for a 2009 Ford E-450 Bus chassis and the 7" Weld on Bracket Kit #4907 with the Draw-Tite Ultra Frame Service Body Hitch #41990 is a Class V hitch- so it's…

view full answer...

Answer 5

I spoke to my contact at Curt and he sent me a complete dimensional drawing for the Curt Hitch part #C12270 that I attached for you to review.

view full answer...

Answer 6

I went out to the warehouse and measured the Curt Trailer Hitch Receiver #13053 to find the distance between those 2 points is 35-7/8" as you can see in the attached photo. Please note that this trailer hitch fits the following vehicles: 2004 -…

view full answer...

Answer 7

I went to the warehouse and took some measurements of the Curt Trailer Hitch #C13240 for you. The overall width of the hitch is 45-inches. The height is 11-1/2 inches, and the depth of the hitch is 17-inches. I have attached a couple photos of the…

view full answer...

Answer 8

I attached a picture that has basically every dimension of the Curt hitch part #C13161. It will hang down 8.28 inches from the mounting surface. From the rear mounting flange to the hitch opening it measures 15-3/4 inches.

view full answer...

Answer 9

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

view full answer...

Answer 10

The Curt Trailer Hitch Receiver #C15320 is 40-1/4" across and from the top to the top of the crosstube measures 1-15/16". This hitch is only a fit for certain model year Chevy Express and GMC Savana cargo and passenger vans.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What is the Distance Between Bolt Holes on the Curt Trailer Hitch # 14053

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching