Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13110
Our Price: $265.70
Confirmed to Fit
2014 Ford Flex
with Dual Exhaust
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (97)
- Q & A (0)
- Photos
2014 Ford Flex - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 4000
- Visible Cross Tube
- 400
- CURT
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Ford Flex's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13110 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Tech Tip
Hitch will fit models with EcoBoost. No drilling required for installation
Complete Towing Package for 2014 Ford Flex
Package Price:$352.10
2014 Ford Flex Owners Who Purchased This Trailer Hitch Also Bought...
Popular Flex Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13110
Average Customer Rating: 4.7 out of 5 stars (97 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Chris from Michigan05/30/2016
2016 FordFlex
Product was perfectly designed to be easy to install, robust, and as elegant as a hitch design can be. Even the instructions were easy to follow along with. The trickiest part is removing the rubber isolators for the mufflers from the hangers. You need to remove them to gain excess for a torque wrench to ensure you don't over-tighten the mounting bolts in the weldnuts on the chassis. Etrailer.com even caught an error in my order, corrected it, and confirmed that their catch was indeed in error.
Thank you Curt and etrailer!
by: Rodney S. 10/16/2013
2010 Lincoln MKT
I've attached a few scaled down photos of the hitch receiver installed. From the time I got the car on jackstands to the time I was lowering the car back down was 25 minutes. It was a very easy install, even by myself. I failed to take a photo of the actual bike rack and bikes so I attached a photo of the kids in the backseat. If you look carefully, you can see the 2 kid's bikes out the back window. My mountain bike sits low enough of the bike carrier that it wasn't visible. Thanks again for all your help getting this in time for the vacation.
by: Matt H from Michigan04/05/2015
2014FordFlex
Good looking Hitch. 39 pounds. Delivery good - showed up before scheduled. Installation tips: 1 You absolutely must drop dual exhaust (I use WD40 and Hand Clamps to push Rubber Exhaust Hangers apart) 2 Lift "big paddle end" of hitch into place first. 3 This is a two person job. Person one-to lift Hitch into place. Person two-thread bolts into uni-body of Flex (thanks to my beautiful wife).
by: Heberle05/22/2020
The hitch I purchased is great. The instructions for installation were very clear. Unfortunately, having a car in the Northeast makes getting rusty bolts off the frame very difficult. But once I finally did the hitch went on very easy.
by: Charles06/09/2023
2019 FordFlex
I was looking forward to installing the hitch this weekend but it never came. I received the little box of accessories but no hitch.
Jenny N.
6/12/2023
Oh my goodness! We will have the hitch shipped out for you. I will have our Customer Service team reach out.
by: George04/19/2019
2016 FordFlex
I was able to install this on my 2016 Ford flex limited without any help aside from a couple Jack stands. Fit great, looks great, couldn't be happier! I would recommend etrailer.com to a friend.
by: Robert 02/19/2024
It looks too good to install! I will let you know how it goes when I install it, probably this coming weekend.
by: George07/14/2023
Install was straight forward and easy. Customer service was top tier. Ordered the wrong hitch initially, the staff was knowledgeable of what I actually needed and was always quick with responding to my inquiries.
by: Eric 11/20/2016
Great product and perfect service from etrailer. Couldn't have been a better experience!
by: James04/04/2022
Great Product fairly easy install. Curt's jig for making these must have slipped at some point because it should really be about 3/8 of an inch wider or they need to keep it from warping during there welding process. I can confirm as other reviews and installation videos have shown you will more than likely have to pry it over to get the second set of bolts in. It helps if you have two people to do this. If you do not you can hold the hitch up with a jack and use a large phillips screwdriver in one of the bolt holes to pry it over and start the first bolt. Once that is in place you will have to find another place to pry to get the next bolt in.
by: Alex R.06/23/2014
2013 FordFlex
solid, heavy build, fit perfectly, instructions are clear. will use mainly for bike rack.
was able to install myself by backing the car onto ramps, lowering the mufflers onto vertical cinder blocks and then resting the hitch on top of the mufflers while getting first bolts threaded.
the only minor issue is that the box arrived really beat up via UPS; the hitch loose inside and actually poking out a hole. but the damn thing is indestructible so it hardly matters!
by: Mike B07/25/2023
Quick shipping and easy install!
by: NWJEFFRO05/03/2017
2015 FordFlex
The hitch kit for my 2015 Ford Flex was a perfect fit and the wiring kit was an exact match. This was a simple installation. A friend and I did this install in less than an hour, start to finish.
I am now able to tow my trailer & carry the quads to the dunes.
Thanks for everything.
I will recommend etrailer.com to all my friends.
by: Tim08/02/2017
2014FordFlex
The hitch itself was easy to install on my model flex. Four bolts and three muffler hangers removed and re-installed, took about 20 minutes. The reason I did not give 5 stars is the packaging is sub-par. I ordered the wrong hitch to begin with and both boxes arrived with holes busted in the sides, the hitch was loose inside and one box had lost half of staples holding it shut. I was surprised that the wire harness I ordered didn't fall out.
by: Janet S.07/12/2016
FordFlex
Very good quality product, Curt hitch for a dual exhaust Ford Flex, and super speedy filling the order and delivery. Bonus, shipping was FREE for the trailer hitch! I saved a ton of money, less than half the price of uhaul and Sears, although I needed to install it myself (it was an easy install.) I definitely recommend this business, my friend who had a great experience referred me and I will do the same because I am so pleased, thanks!
-.
by: Bernie02/28/2017
2015 FordFlex
Fit perfectly
Suggest a can of dry lubricant to help remove the rubber hangers for the exhaust system.
Can be done with the car on the ground. It was easier when one side was lifted with a jack. Put a block under the tire for saftey.
Nice doing business with this company
by: Philip01/29/2019
2018 FordFlex
It came before it said it would. The only thing is the cardboard inside of the box let go but so far looks like no damage. I have not installed it yet. Will update when I do. Great customer service.
Philip
1/30/2020
My son and I installed it. I havent had the chance to use it. I put it on the Flex for our trailer that we tow behind our Motorhome. We havent used the trailer since last April, so I havent hooked it up to the flex to put it away yet.
by: Ken07/05/2018
2017 FordFlex
Hitch fit perfectly. Quality and good looking once under Flex. Takes a little longer when you install it laying on your back on garage floor but easy enough for any one with a little experience can do. Held it up with two jack stands and went in pretty easy. Have used Curt products before and always happy with them. etrailer is always the place to go for any item needed. Thanks....
by: Dale B.06/12/2015
2014FordFlex
This hitch fit our 2014 Ford Flex (non-ecoboost) perfectly. Only problem was the installation instructions did not match our Flex. The instructions were for a Ecoboost Flex and we have a non-Ecoboost model. A quick call to Curt resolved the issue. What should be stated on the website is that this hitch will fit both Ecoboost and non-Ecoboost models.
by: Jeff Y10/02/2019
Fit on this was perfect. Installation was super easy and only took about 30 mins. The only time I needed another hand was when trying to bolt the hitch into place, but my 11 year old was able to hold it up long enough.
by: K. Schroeder11/13/2012
Hitch arrived when scheduled. Everything was in the box as expected. Installation was around 45 minutes and the hitch fits perfectly. Courteous service and etrailer answered the phone...on a Saturday, when I needed them too. It was nice to have free shipping as well. I would, and did recommned etrailer to a friend.
by: Nelson GALLOPS03/08/2018
THE TRAILER HITCH WAS NICE-- THE WIRING WAS NICE --
TO INSTALL BOTH TOOK MY FRIEND AND I LESS THEN
2 HOURS .--GREAT PEOPLE TO DEAL WITH --THANKS
by: Dave 08/22/2021
We love quality of this Hitch Receiver. We are a biking family and use it to load up our family bicycles. etrailer make the install process easy with online videos. I would definitely buy from them again.
by: Tmpeach07/21/2017
2016 FordFlex
I'm a car guy and have installed dozens of hitches. I could have used help on this one only cause it was so heavy but once the wrestling match was over I won and the hitch is sexy
I love etrailers services and products
25
133
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Weight Distribution Recommendation for Trailer that Weighs 4,000 lbsAll of the components you mentioned will do a great job for a towing setup for your 2017 Ford Flex and they are all linked below for you to check out but to answer your main question about weight distribution the way to do it is to base off of the loaded tongue weight of the setup. So since your trailer would be 4,000 lb you'd most likely have a tongue weight around 400 to 500 lbs so the system I would recommend is the Strait Line part # RP66082 which has a tongue weight range between...
view full answer... - Least Visible Trailer Hitch and Wiring for a 2012 Ford Flex Limited EcoBoost Dual ExhaustBoth of the trailer hitches available for your 2012 Ford Flex with dual exhaust have the same design and install in the same places on the vehicle so they will all look pretty much the same. The cross tube will be visible beneath the rear bumper but is recessed enough to not be glaring. The most popular option is the etrailer trailer hitch # e52AR but Curt hitch # C13110 will work just as well. I would go with whichever costs less. I have included links to videos showing installations...
view full answer... - Trailer Hitch Recommendation for a 2012 Ford Flex SEL without EcoboostFor a 2012 Ford Flex without Ecoboost the correct Curt hitch is # 1355 or the etrailer hitch # e95KR. These hitches are very similar and either would be a great choice. The most popular choice is the Curt # 13551. I would recommend going with the one that costs the least. Curt hitch # C13110 that you referenced is designed to fit the following models: 2009 - 2018 Ford Flex with Dual Exhaust 2010 - 2017 Lincoln MKT with EcoBoost If you plan on doing some towing, I recommend the etrailer...
view full answer...
- Which Curt Hitch 2016 Ford Flex with Dual ExhaustI wish there was, but if you look at the difference between the part # 13551 that you have and the Curt hitch that does fit the dual exhaust models part # C13110 you can see there's a pretty huge difference (see attached pictures). I wish I had a great solution for your scenario but the only way you'll be able to install a hitch on your 2016 Ford Flex with dual exhaust is going to be with the Curt hitch # C13110.
view full answer...
- Recommended Method to Loosen Stubborn Exhaust Hanger Bracket Bolts on 2010 Ford FlexThank you for your recent purchase of Curt Class III hitch # C13110. The two exhaust hanger bracket bolts shown in the linked video at the 2:04-minute mark certainly may be stubborn after 5 years in place. The spray-on lubricant you used, such as WD-40 or PB Blaster, may require some time and multiple applications to loosen the hardware. On your Edge it is hard to get that spray lubricant into the thread area where it needs to go. The best suggestion I can give you is to borrow or rent...
view full answer... - Swing-Away Hitch Cargo Carrier for 2014 Ford Flex That Will Clear Heat from Dual ExhaustThe two 2-inch hitches we offer that fit your 2014 Ford Flex with dual exhaust are Draw-Tite # 75679 and Curt # C13110. Once installed these two hitches will be fairly close to the rear of the vehicle; the hitch pin holes will be about 3-inches forward of the rear edge of the bumper cover. As most hitches go, this is a relatively large amount of clearance, meaning that a hitch cargo carrier will be fairly far from the two exhaust tips. The hitch receiver opening will be pretty much at the...
view full answer...
- Trailer Wiring Harness for a 1994 Lexus ES 300All of the trailer wiring harnesses for the 1994 Lexus ES 300 are hardwire kits meaning you will have to splice them into the tail light wiring on the vehicle. To install these harnesses you will need to first test the tail light wiring to determine the functions of the vehicle wires and then splice into them accordingly. Wiring harness # C59236 includes a small circuit tester so you would not have to get one separately. I have included a link to the installation instructions for you.
view full answer... - Trailer Hitch and Wiring Recommendation for 2018 Ford FlexFor your 2018 Ford Flex the hitch I recommend is the USA made Curt hitch part # C13110. This hitch has great towing capacities at 4,000 lb trailer weight and 400 lb tongue weight, is easy to install, and has a 2 inch opening which is the most popular hitch size. For trailer wiring you'd then want the Tekonsha kit # 118472 which installs easily without requiring any splicing. See install video I attached for this and the Curt hitch. Since you plan on doing some towing you might be interested...
view full answer...
- Wiring Brake Controller and 7-Way to 2013 Lincoln MKTWe have a way to install a 7-way on your 2013 Lincoln MKT but there isn't a way to tie into any factory wiring. What you'd need to start with a custom fit 4-way part # C56095 and then convert that to a 7-way with the part # ETBC7 which also comes with everything needed to wire up a brake controller as well. Then for a brake controller the P2 # 90885 would work really well. If you can verify the brake controller wiring is active you can use some of the circuits there. Red wire of controller...
view full answer... - Trailer Hitch and Wiring Harness Recommendation for 2013 Lincoln MKTI'd be happy to help you with that. For a hitch, I'd recommend the US made Curt # C13110 Class III hitch. In my opinion, Curt does a nicer job on their powder coat finish which is why I'd recommend that option over the Draw-Tite # 75679 you'd looked at. For a trailer wiring harness, I'd recommend the Curt T-Connector # C56095. You'll also need a ball mount like # D-28, a hitch pin like # PC3 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. I've linked to install videos...
view full answer... - Recommendation for a Trailer Hitch that Will Fit a 2010 Ford Flex Equipped with Ecoboost EngineWe offer the Curt Class III receiver, part # C13110 for the 2010 Ford Flex equipped with the Ecoboost engine. This hitch is pretty easy for somebody with average mechanical ability and access to a torque wrench to install within 40 minutes to an hour. The Curt Class III hitch you were looking at will not work with the Ecoboost equipped Flex. For your review, I have linked the installation instructions and an install video that you might find helpful. By looking at the install video,...
view full answer... - Tongue Weight Capacities of Trailer Hitches Available for 2016 Ford FlexAs long as the weight of the carrier plus the weight of the wheelchair/scooter comes in under the tongue weight capacity of the hitch being used on the vehicle, the fact that the Flex has a unibody won't be relevant. When Curt designed the # C13110 for dual exhaust models and the # 13551 for single exhaust models, they did extensive testing to ensure that the vehicles could handle the tongue load the hitches were rated for. As long as no extenders or adapters are used that adds distance...
view full answer... - Recommended Curt Trailer Hitch for 2018 Ford Flex with Dual ExhaustThe Curt trailer hitch receiver confirmed to fit your 2018 Ford Flex with dual exhaust is part # C13110. It is a fit for 2009 - 2018 Ford Flex with Dual Exhaust. For your trailer wiring, you may want to consider the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118472. This custom-fit T-One connector plugs into your Ford Flex's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies...
view full answer... - Trailer Hitch for 2013 Ford Flex with Dual ExhaustSince the Curt # C13110 and the etrailer part # e52AR are so similar in design I'd recommend going with the better priced option.
view full answer... - Would 24x60 Pro Series Cargo Carrier Work with 2010 Ford FlexYes, first you will need a trailer hitch with a 2 inch hitch receiver, like Curt Class III Trailer Hitch Receiver # C13110 for the Ford Flex with dual exhaust, or Curt Class III Trailer Hitch # 13551 for the Ford Flex without a dual exhaust. Then you can use a cargo carrier like the 24x60 Pro Series Cargo Carrier for 2" Hitches, # 63153, which you referenced. I have included a couple installation videos of these hitches and the cargo carrier for you to check out.
view full answer... - Do I Have To Drill Into the Body To Ground the T-One Vehicle Wiring Harness for a 2015 Ford FlexThe Curt Trailer Hitch Receiver part # C13110 is covered with a durable black powder coat that does not make for the best ground. Therefore, when installing T-One Vehicle Wiring Harness part # 118472 on your 2015 Ford Flex which is what I recommend you use, the ground will need to be attached elsewhere on the body to a bare metal surface. That said, there may very well be a factory ground point within reach that you can use instead of drilling a hole in the body behind the tail light. I...
view full answer... - Curt Trailer Hitch Receiver Fit For 2019 Ford Flex With Dual ExhaustHi Richard, No, the Curt hitch you asked about is not a fit for the dual exhaust model of 2019 Ford Flex, though there is one that fits. The correct part number for that hitch is the following: - Curt Trailer Hitch Receiver # C13110 I went ahead and verified this fit directly with the manufacturer for you. Also, if you plan on doing some towing and need a 4-way wiring harness, the correct fit for your '19 Flex is the Curt T-Connector Vehicle Wiring Harness # C56343.
view full answer... - Trailer Hitch for a 2010 Ford Flex with or without Dual ExhaustYou are correct, dual exhaust is exhaust on each side of the vehicle, not a dual tip on just one side. But the hitch fits either style. The installation instructions for Curt trailer hitch # C13110 actually do mention dual exhaust. You have to scroll further down to the plain black and white version of the instructions to see the note which appears before step 1. The note says: The Ford Flex Ecoboost and the Lincoln MKT models have dual exhaust. Repeat instruction for passenger side. This...
view full answer... - Trailer Hitch Receiver, Wiring Harness & Mounting Bracket For 2010 Lincoln MKT EcoBoostWe do have everything you need for a trailer hitch receiver, wiring harness, and mounting bracket for your 2010 Lincoln MKT EcoBoost; I'll go ahead and list out all the parts for you: - Curt Trailer Hitch # C13110 - Curt T-Connector Vehicle Wiring Harness # C56095 - Mounting Bracket 4-Pole Flat # 18144 - No-Drill Mount for Electrical Mounting Bracket # 18140
view full answer... - Hitch Recommendation for a 2015 Ford FlexWe have hitches available that are confirmed to fit your 2015 Ford Flex. If you have dual exhaust you would want the Curt Hitch part # C13110, if you have single exhaust you would want the part # 13551 instead. I attached install videos for both hitches for you to check out. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer... - Does the Exhaust Need to be Lowered to Install a Curt Hitch on a 2009 Ford FlexTo install the Curt Hitch # C13110 on your 2009 Ford Flex you will not need to temporarily lower your exhaust. Check out the installation instructions I attached for this hitch to see how it installs. For trailer wiring you would want a Tow Ready Wiring Harness # 118472. This harness installs in line with the tail light harness of your vehicle and does not require any splicing. Check out the installation instructions and installation video I attached for this product also.
view full answer... - Trailer Wiring Harness That Fits 2011 Lincoln MKTThe correct trailer wiring harness that fits your 2011 Lincoln MKT is the T-Connector Vehicle Wiring Harness # C56095. I have added a link to a video which shows this harness being installed on a 2016 MKT, which is the same generation as your 2011 so the install will be the same. In regard to installation we aren't affiliated with anybody, but any type of local certified mechanic or auto shop will be able to perform this install. The this is a simple install relative to some of the work...
view full answer... - Trailer Hitch for a Cargo Carrier on a 2013 Ford Flex with Dual ExhaustYes, the Curt trailer hitch # C13110 will fit all models of the 2013 Ford Flex including models with dual exhaust. I have linked the isntallation instructions and a video showing installation for you. You originally mentioned wanting to use the hitch with a cargo carrier. This is a Class III hitch with a 2 inch receiver so there are many options for you. I have included a link to the cargo carriers that fit 2 inch trailer hitches for you.
view full answer... - Which Curt Hitch Fits 2013 Lincoln MKT with EcoBoost EngineWe have a Curt hitch that fits your 2013 Lincoln MKT with the EcoBoost engine with the part # C13110 but the # C13000 that you referenced only fits the models without the EcoBoost engine. The big difference is the driver side crosstube of the # C13110 which is designed to fit around the exhaust of the EcoBoost engines.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Jonathan Y
Written by:
Lindsey S
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris M.
5/30/2017
Worked well with no issues. Used for about 6 months, then got another Flex. Need to swap it in as well.