Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Retail:$453.95
Our Price: $258.88
You Save: $195.07
Confirmed to Fit
2011 Ford F-350 Super Duty
Pickup
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (228)
- Q & A (0)
- Photos
2011 Ford F-350 Super Duty - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- 2 Inch Hitch
- Class IV
- 12000
- Concealed Cross Tube
- CURT
- 1200
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Ford F-350 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14355 Curt Class 4 Trailer Hitch Receiver
Replaces 14044
Item # C14355
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Vehicles with a 20 inch or smaller spare tire will still be able to store the tire under the vehicle. No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation
Complete Towing Package for 2011 Ford F-350 Super Duty
Retail:$556.90
Package Price:$362.10
2011 Ford F-350 Super Duty Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-350 Super Duty Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C14355
Average Customer Rating: 4.8 out of 5 stars (228 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Thomas 05/10/2024
Ford
This hitch was exactly what I needed to upgrade from a 5k towing capacity to a 9k. My Brother and I, we got it into place and secured it.
I’m going to tow a 7500lb camper with a 7.3l Ford diesel Powerstroke. I bought this hitch for a reason and I believe in this company.
by: William 02/28/2024
2003 Ford F-250 Super Duty
Very happy with etrailer. good prices, quick delivery. And this hitch is fabulous, super easy install and it is very heavy duty. Already placed another order with etrailer.
by: Jim H06/26/2019
The hitch was reasonably priced, shipped quickly and the product installed without any surprises. I have used it many times throughout the past year with no issues. The quality of the hitch was excellent. I would recommend etrailer to anyone looking for a new hitch
by: Randy 04/05/2024
Excellent service when ordering!
Fair price
Great product!
Quick shipping
by: William08/01/2020
This was probably the easiest install of anything I have added to this truck and everything fit perfect done in 15 minutes by myself! longest time was getting the spare tire out of the way. This truck normally pulls a gooseneck which was a more difficult install but still not too bad. Need to pull a car trailer and this works perfectly. I am very happy with the fit, finish, and weld quality of this receiver hitch
by: James Mc04/21/2014
2006 Ford F-250-and-F-350-Super-Duty
The Hitch was what I was looking for to fit under the Ranch Hand Bumper. If you are installing this on a truck that has a Ranch Hand Bumper, you will also need to order the BROPHY (code: BM20), Ball Mount, 13 1/4" long, to get the ball out from under the bumper.
I did have a few issues installing the Hitch, I believe that the hitch was damaged during shipping. The shipping packaging was damaged and UPS stated that it would not stay in the box during his route. The issues was that the left two blot holes would not line-up for the bolts. With the help of a five foot pipe was able to line it up.
Over all, I'm happy with the hitch.
by: Joseph10/05/2023
1999 Ford F-150 and F-250 Light Duty
This hitch is a wonderful addition to our truck. The hitch bolts straight on the truck an having a 1999 f150 flareside (which is hard to find exact parts for) easy. First I bought a hitch from ebay and when I got it it did not fit.Bolt pattern on flaresides are differant then other f150's.
by: Thomas06/10/2020
I ordered this hitch to replace mine which had started to rust through and I was concerned it would fail. The other reviews on this hitch indicated it would fit perfectly on my 2004 F250. They were correct, not a single issue! I installed it by myself but it would be much easier with a second set of hands. I don’t have anything to tow yet but I’ll be ready when the time comes.
Tom
6/11/2021
No issues with the trailer hitch. I’ve towed a trailer and a wood splitter so far.
by: Caleb S09/28/2017
2005 Ford F-250 Super Duty
Got this to replace the rusted out hitch on my 05 f250. Wicked good quality, and a class size up from the factory hitch. Had to remove the spare tire heat shield for the holes to line up on the passenger frame rail, off by about 1/2". No big deal, as I don't keep the tire under there. Many happy towing miles ahead.
by: Rob09/07/2018
Tight fit and easy to install. (HINT: get someone to help lift into place or set it on a storage tub and slide it under the frame. Also lower and remove the spare tire). Takes 6 bolts and done!
by: Carl02/21/2020
2001 Ford F-150
Super good fitting hitch an was able to install it in about 10 minute by myself!
by: Dave C01/07/2023
2002 Ford F-150
E trailer was the only place I could find a class IV hitch for a fair price.ford rates the truck at 8500 lbs. tow capacity but it had a class III 6k on it. I removed the 6k and installed the curt 10k so I can use the available capacity of 8.5k.
All parts came and was well packaged and an easy straight forward DIY install.
Kudos to etrailer for prompt dependable and accurate service as always.thanks for offering the 10k hitch also.
by: Jonathan 04/18/2023
2001 Ford F-150
I’ve got a 2001 Ford F-150 XLT and it was the perfect fit. Took about an hour to install. The included instructions were precise and straight to the point. Almost a year later and it’s holding up as expected!
by: Richard02/17/2023
2006 Ford F-250 Super Duty
This was a perfect transaction. I shopped around a lot, and etrailer's price was as good as you're likely to find.The hitch is exactly as described, all hardware was included and the installation instructions are clear, complete and easy to follow. Shipping was amazingly fast. You could buy this exact same product elsewhere -- but why would ya?
by: Dennis T09/08/2018
2003 Ford F-150
Great customer service and prices. Ordered a hitch that was back ordered. Adam called me several times to let me know the status and offered me options. The hitch came a day earlier than promised. Perfect fit for my 2003 F150 morning extended cab. Didn’t have to take the spare tire down. The whole mounting process took less than 30 min. Solid hitch with good welds.
Dennis T.
9/8/2019
The trailer hitch has been great. I’ve hauled cars, tractors, a big Vermeer chipper. Hookup was solid and quick. Great buy
by: Bill M08/16/2016
2003 Ford F-150
Very well built hitch, very easy to install only took my son and I 10 minutes to bolt in place . shipping was free and very fast only about 4 business days. The price from etrailer cannot be beat , and I will continue to by from them. I am going to order a weight distribution system with sway control in the near future.
Bill M.
8/16/2017
Still working great,great quality no rust yet
by: Herald12/28/2022
This is agreat hitch. It fit perfectly and look strong and well made.
Thanks to etrailer for getting it to mesofast and providing such great products.
by: Norm T01/14/2019
1997 Chevrolet Silverado 1500
Install is a snap.
Had it installed in less than 30 minutes.
Took more time to get my tools out and drop the spare tire out of the way.
No drilling. It used existing holes in the frame in my 1997 F150 XLT 2wd.
Drop the spare tire out of your way.
The rest is simple.
I put loktite on the bolts to keep them from vibrating loose.
I have used it to tow a small 4x8 trailer with a large ice chest and 4 wheeler over 1500 miles from VA to MN and back.
Pulled my 2800 lb equipment trailer with my tractor and assorted implements (about 5k total weight) around my local area.
No issues so far.
I do have bigger than stock tires 265/70r16 and I still just have enough room for the spare without it hitting anything.
The only thing I wish it had, would be a place to mount the trailer plug bracket to maybe 4-6” off centered of the receiver tube).
There are tabs that stick out on each side of the receiver tube. But they are just above where the safety chains go, and I felt like it wasn’t a suitable spot.
You can drill a couple of holes in the bottom of the hitch, but on standard 2wd’s this hangs kind of low. I like keeping my plug higher, to prevent it from getting banged up. So I fabricated a bracket and installed the plug behind the license plate.
A person could make a bracket that mounts to the bottom of the receiver and put the plug bracket above it. I felt like it wasn’t a clean look.
But overall the receiver easily mounts to the frame and sets cleanly under the rear stock bumper.
I did install this by myself. But if you have a buddy to help hold it in place, it may make it a little quicker and easier.
by: Buck 02/19/2020
I couldn't be more pleased with my purchase experience and product quality. The receiver was delivered promptly and fit so well I had it installed without assistance in less than 45 minutes. I have flagged etrailer in my "favorites" for my future needs for anything trailer related.
Buck L.
2/23/2021
been a year and still performing perfectly
by: Randy11/16/2017
This is a great receiver and price and shipping was nothing short of fantastic. Companies like etrailer is a good example of why we buy online in the first place..
Randy
11/16/2018
This is a great product, reasonably priced. I used it on a project to help upgrade my flat bottom boat to a bass boat. Helped out trying to move it around!
by: Sam Z.08/15/2014
1997 Ford F-150
Recently, I purchased several items from etrailer.com and was completely surprised at how easy the entire process was from selecting the correct parts for my 1997 Ford F150, to delivery and installation. Here's a quick rundown of the items I purchased:
C14355 - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
3035-P - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers;
90885 - Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional;
118242 - Ford Replacement OEM Tow Package Wiring Harness, 7-Way;
18138 - Mounting Bracket for 7-Way.
Every item was received in perfect order, was easy to install, and looks great! Thanks etrailer.com!
by: Steve 07/25/2020
Good day, received hitch 4 days early from date given. Installed it on my truck Friday in about 45 minutes. My 9 year old grandson help me install the hitch. Thank you for a great product.
Steve
7/26/2021
Installation was straight forward and easy to install. Using the hitch to pull my 16 flatbed trailer. No issue when pulling the trailer empty or fully loaded. You supplied a great product.
by: James T05/04/2019
Someone had welding some exhaust brackets to the frame that were in the way of attaching the hitch. You should never weld to the frame. Regardless after I got the bracket cut off and ground down the hitch went on bolted up like it was suppose to. The instructions recommended removing the spare tire for the assembly but managed to get it installed with the spare tire in place.
I would recommend trying the bolts in the bolt holes before getting the hitch in position. I found that mine were a little rusty and had to be cleaned up before the bolts would start correctly. That part is much easier to do without the hitch in the way. Luckily I had a tap the correct size and cleaned up all of the threads without the hitch in my way.
by: Michael01/16/2023
Order was perfect SHIPPING GETS A FAT ZERO. Receiver can in a box with no shipping wrapping and was scratched all to hell..Very disappointing…
by: James06/25/2019
Easy to install. Took my Father-in-law and myself an hour and a half or so. Most of that time was getting the spare off and back on the truck. Just make sure you have a torque wrench to put the torque on the nuts.
James F.
6/26/2020
I have used it multiple times with no issues. Solid hitch receiver.
25
228
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- comparing Curt Class III and IV Trailer Hitches for a 2001 Ford F-150The main difference between the Curt trailer hitch # C14355 and hitch # 13355, is capacity. Both hitches feature a 2 inch receiver. Both hitches will fit on your truck if it has a 20 inch or smaller spare tire. But the key is the weight capacity of each hitch. The Class IV trailer hitch, # C14355, has a tongue weight capacity of 1,000 pounds, and a gross trailer weight capacity of 10,000 pounds. When used with weight distribution, those ratings increase to 1,200/12,000 pounds. Keep in...
view full answer... - Suspension Upgrade and Towing Set Up for a 2001 Ford F-150 4WDI would be happy to help you set up your 2001 Ford F-150 4WD to tow your camper. I have listed the usual things you'll need, like a hitch, wiring harness, and ball mount below. If you are already set up with these items I recommend adding a set of Stability Plus Stabilizer Helper Springs item # SPS94FR. These attach to your factory leaf springs and provide you with 1,500 lbs of extra support. They will address any squating issues you truck has when hooked up to your trailer. Trailer Hitch...
view full answer... - Receiver Hitch Recommendation for 1954 Ford F-250 TruckCurt and Draw-Tite don't list any specific hitch fits for a vehicle that old, but luckily enough, cab/chassis trucks typically use a 34 inch wide frame and there are tons of those available. I'd recommend the Curt # C14082. This Class IV hitch has a 12K towing, 1K tongue weight capacity. To absolutely confirm the fit, before ordering you'll want to measure the height difference (also known as the drop) between the underside of the frame member and the underside of the rear bumper (if there...
view full answer... - Hitch Recommendation for a 2000 Ford F-150 4x4 for Towing a BoatWe have hitches available that will fit your 2000 Ford F-150 with a standard bed. The most popular option we have is the Curt Hitch part # C14355. This hitch has plenty of capacity and has a ton of positive reviews from our customers who have tried it so I would recommend it for you. Check out the install video I attached as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # EBMK2416. It comes with a ball mount with a 3" rise or 4" drop . It also...
view full answer... - Overall Width and Mounting Hole Bolt Spacing For Curt Trailer Hitch Receiver # C14355The Curt Trailer Hitch Receiver # C14355 is going to be 35-1/2" wide. The more important measurement to look at is going to be the mounting bolt holes. I have included an image below with the mounting bolt hole spacing when measuring on center.
view full answer...
- Trailer Hitch Availability and Fit for 2002 Ford F-350 Super Duty FX4The correct hitch for your 2002 Ford F-350 Super Duty FX4 will depend on the bumper it has. You can use the linked page to see all options; just use the Select Vehicle Style drop-down menu to choose the type of bumper that is on your truck. Once you select your bumper style the correct hitch options will be shown. Let's say you have a standard or step bumper. In this case you have choices in Class III, Class IV and Class V hitches from Curt and other brands. For a 2-inch Class III hitch...
view full answer... - Trailer Hitch for 2002 Ford F-150 that Allows Full Spare to Store Under VehicleWe have the Curt hitch part # C14355 which is a fit for your 2002 Ford F-150 extended cab and fits with factory spares as long as the spare is on a wheel that has a smaller diameter than 20 inches.
view full answer...
- Compatible Hitch Fit for Ranch Hand Legend Aftermarket Bumper on 2009 Chevy Silverado 2500The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W # BWHDRH25187 which has a 6-1/2 inch drop. The drop is the vertical distance between the underside of the frame member and the underside of the bumper. If this distance on your truck is less than 6-1/2 inches, then the # BWHDRH25187 would be a fit. If that amount of drop isn't sufficient, you...
view full answer... - Class IV Trailer Hitch Recommendation for a 2002 Ford F-150 SuperCrewThere are only certain hitches that will fit the 2002 Ford F-150 SuperCrew models. I have provided a link to them for you to view, but the Curt hitch, # C14355, will also fit. You could also use Draw-Tite trailer hitch # 41920. I have included a link to the installation instructions and a link to a video showing a typical installation for you to view. If you plan on doing some towing, I also recommend the etrailer ball mount kit, # EBMK2416. It comes with a ball mount, interchangeable...
view full answer... - Will the Curt Hitch Part # C14355 fit a 2004 Ford F-250 with a Ranch Hand BumperMore than likely the Curt Trailer Hitch part # C14355 would work on your 2006 Ford F250 with your Ranch Hand bumper as I checked with Ranch Hand and they state that their bumpers will let you retain your factory hitch. I checked with Curt and they told me that the # C14355 will install using your factory installation points. Looking at your pictures you might have to remove the hitch ball in your bumper.
view full answer...
- Is Curt Receiver # C14355 For 2005 Ford Super Duty Trucks Interchangeable With 2001 Dodge CaravanThe Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14355 is a fit for your 2005 Ford F-series Super Duty truck, but will not fit a 2001 Dodge Caravan. If you are interested in a trailer hitch receiver for your 2001 Dodge Caravan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13362 which is confirmed to fit. This will give you a 2 inch receiver for compatibility between accessories, but you will be limited by your vehicle's towing capacity and...
view full answer... - Does Curt Hitch C14355 Fit 1999 Ford F-150 FlaresideYes, the Curt Trailer Hitch Receiver # C14355 is a fit for your 1999 Ford F-150 Flareside.
view full answer... - Trailer Hitch Recommendation for 2000 Ford F-150For towing a 3,000 lb trailer with your 2000 Ford F-150 the Curt hitch part # C14355 would fit and work well as it's a confirmed fit for your truck and has a 10,000 lb trailer weight capacity as well. For trailer wiring you'd then want the part # C56031 for a 4-way. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer... - Comparing Curt Trailer Hitches # C14355 and # C14357 for a 2004 Ford F-150The difference between Curt trailer hitches # C14355 and # C14357 is the fit list for each. Curt hitch # C14355 fits a 2004 Ford F-150 Heritage Edition and not the New Body 2004 models. Hitch # C14357 fits the New Body style, not the Heritage, but will not fit any models that have the factory trailer hitch. If you have a 2004 New Body style then there are no hitches confirmed to fit on models that have the factory hitch.
view full answer... - 2003 Ford F-150 Trailer Hitch RecommendationIn 1997 Ford made enough changes to the Ford F-150 that changed the hitch fits. So a hitch from a 1996 model would not fit a 2003 model. So for your 2003 Ford F-150 the Curt hitch part # C14355 would be a great option confirmed as a fit. I attached an install video for this for you to check out as well.
view full answer... - Vehicle Fits for Reese Hitch 89002 and Correct Hitch for 2003 Ford F-150My contact at Reese confirmed that the part 89002 is a ball mount made for a 2-1/2 x 3/4-inch rectangular hitch opening that was for applications only on 1984 through 1995 Chrysler and Dodge minivans. This item fits no Fords at all. For the 2003 Ford F-150 we offer both rear-mount hitches and front-mount hitches, each shown on their own respective linked pages. For a rear hitch I suggest the USA-made Curt # C14355 and for a front-mount hitch the Draw-Tite # 65025.
view full answer... - Recommended Trailer Hitch for 1999 Ford F-350 Super DutyI have just the trailer hitch for your 1999 Ford F-350 Super Duty. Check out Draw-Tite Trailer Hitch # 41922. This is a heavy duty Class IV trailer hitch with a 1000 towing capacity and is a bolt on installation like you are looking for. If you want to do some towing you may be interested in the following parts: For a wiring harness use # 18252 If your F-350 has the tow package use # 118243 I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch...
view full answer... - Class III or IV Trailer Hitch Recommendation for a 1998 Ford -150 LariatThe tech notes you see regarding spare tires and other tech notes can appear for several reasons. First, the hitches will fit a variety of vehicles in most cases. It is possible that the note really applies to another vehicle the hitches fit but the note is tied to the hitch so it will always appear with it. Notes can also appear if we feel that they need to be added based on our experiences and customer responses. Since you do not have a 20 inch spare you can disregard that note. The...
view full answer...
- Trailer Hitch Recommendation for a 2006 Ford F250 Crew CabI would personally recommend going with the Curt Custom Fit Trailer Hitch Receiver, # C14355, for your 2006 Ford F250 Crew Cab. This hitch is specifically designed for your Ford F-250 and will bolt directly to your frame with no welding required. In order to be fully prepared to tow, you may also need Trailer Wiring, # C56032, and Ball Mount Kit, # EBMK2416.
view full answer... - Can I Move My Hitch From a 2004 Ford F-350 to a 2008 Ford F-350It sounds like you're asking whether or not the B&W Turnoverball Underbed Gooseneck hitch # BWGNRK1108 is compatible with both the 2004 Ford F-350 and the 2008 F-350 and I'm happy to report that it is compatible with both vehicles. If you're asking about an actual frame mounted, bumper hitch like the Curt # C14355, that is also compatible with both vehicles. If you're looking at a specific hitch that you're trying to swap and can provide me with the model and manufacturer, I'm happy to...
view full answer... - 2001 Ford F-350 275R18 Wheel and Spare Tire Clearance for Installation of Curt 14355Your larger tire size is about 1.6" taller than OEM installed tires, making them a little more than 33" in height. I do not think there will be an issue with the Curt Trailer Hitch, # C14355 as it is 34" from center to center bolt hole. Please note the attached image.
view full answer...
- Parts Needed to Install Trailer Wiring on 2000 Ford F-150Since your 2000 Ford F-150 Lightning does not have the factory tow package you'd need to go a different route for trailer wiring. You'd want to start with the part # 118344 for a 4-way wiring harness. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way...
view full answer... - Trailer Hitch for a 2002 Ford F-150 Lariat SuperCrewYes, the Curt hitch part # C14355 that you referenced has been confirmed as a fit for your 2002 Ford F-150 Supercrew. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount...
view full answer... - What Bumper Type Does Curt Hitch C14355 FitThe Curt hitch part # C14355 that you referenced is going to fit your 2000 Ford F-250. Basically as long as your rear bumper is the stock one that came on the truck you have one of the two bumper styles that would work with it. The deep drop bumpers are much taller bumpers at the rear of the vehicle. You would know if you had one. But for further clarification check out the help article link I attached that covers all of the bumper styles found on trucks. The hitch does come with all...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim H.
6/30/2020
The hitch continues to work flawlessly. I am very happy with the purchase.