Trailer Hitch Availability and Fit for 2002 Ford F-350 Super Duty FX4

Question

Question:

I want to make sure the hitch I order will fit my truck properly. How do I know the width is the same if its not listed. My existing hitch is 36inch to the outside of each side. I have a 2002 f350 super duty fx4. I see some hitches are 34inch or 37inch how do I know what to measure then order the correct one?

asked by: Sean

0

Expert Reply:

The correct hitch for your 2002 Ford F-350 Super Duty FX4 will depend on the bumper it has. You can use the linked page to see all options; just use the Select Vehicle Style drop-down menu to choose the type of bumper that is on your truck. Once you select your bumper style the correct hitch options will be shown.

Let's say you have a standard or step bumper. In this case you have choices in Class III, Class IV and Class V hitches from Curt and other brands. For a 2-inch Class III hitch use part # 13355 or for a Class V hitch use part # C15410 for a 2-inch or part # C15810 for a 2-1/2-inch receiver. Some hitches may affect the re-installation of the spare tire. The page will indicate any fit exceptions for the hitches shown. You do not have to measure your frame to select the correct hitch; just match up the truck's features and note the fit information on the hitch page.

All hitches we sell include the required hardware. A helpful article on hitch installation is linked for you.

expert reply by: Adam R

0

Answer 1

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

view full answer...

Answer 2

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to…

view full answer...

Answer 3

We have exactly what you are looking for! You are correct that the Curt Trailer Hitch Receiver #C15810 you were looking at will not fit your 1999 Ford F-350 with an 8" deep drop bumper. Instead I recommend the Curt #C15316 which measures 9"…

view full answer...

Answer 4

The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your…

view full answer...

Answer 5

For that length of extension we only have 2-1/2 inch hitch options as they are the only size that's going to have the strength for the stress extensions put on the hitch. You would need to upgrade your hitch to the 2-1/2 inch size with a hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Hitch Availability and Fit for 2002 Ford F-350 Super Duty FX4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching