To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
This fully welded trailer hitch receiver bolts onto your Ford F-250 and F-350's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
Note: Your vehicle must have 34" frame spacing
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside
Complete Towing Package for 1996 Ford F-250 and F-350
1996 Ford F-250 and F-350 Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-250 and F-350 Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (105 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Installed on 2007 Isuzu NPR chassis with frame extensions for bumper brackets.
This hitch DOES fit. Actual hitch width is 33.75 inches so it fit perfectly between the bumper bracket extensions. Slid in Like buttah.
Hardware length allowed for avoiding a bolt head protruding from the frame and installing double shims from underside. Very helpful.
5.5 inch drop put receiver below the bumper. Thank you etrailer for pictured measurements.
Hitch was falling out of the box when delivered. But will do its purpose. Fast shipping
There are only so many ways to describe a trailer hitch.
We put this hitch on my 1987 GMC 61/2' short box 4WD with a regular bumper with no problems and look real nice and real strong with good load ratings
Ronald P.
8/29/2017
real good havent pulled anything yet
Hitch fit good on a 74 Ford super camper special. There we two rivets on the frame for a crossmember that I ground down and drilled out because they were exactly where I wanted the front mounting hole on the hitch to be located. Other than that pretty good.
The hitch is to short width wise - will not fit my truck
bought two of these receiver hitches, one for my 1987 GMC V1500 SWB and one for my 1984 Chevrolet K10 SWB. both went on perfectly and look great. Haven't pulled anything yet
It came all scuffed up and with a bent mounting arm...
How do you bend a class 4 hitch...??
Have not put the hitch thru any hauling duties, it was easy to install, l completed the install by myself.
Bought a 1998 international 3800 (school bus) fit is pretty good, product is superb! Packaging could be better.. had some scuffs and scratches.
Nice heavy duty hitch great for my school bus good product I would go again
This was delivered extremely fast! Made it here in one piece! Can’t wait to install it. Another great products from Etrailer! Thank you guys again. Will be back soon!!
Excellent quality, but unfortunately didnt fit, send it back and ordered correct one.
Great costumor service.
This makes my 4th Curt hitch purchased from etrailer. 5th overall and they have all performed flawless. I pull a trailer probably 5 out of every 7 days. Always have excellent customer service from etrailer and recommend them to anyone needing a hitch.
Hannah was correct and punctual with her Customer Service!!!!!!! Keep up the good work!
I purchased a used ambulance as a work vehicle for my company. Needed a hitch but not sure which one I would need because of the ambulance box. One phone call to etrailer with their friendly operator and a referral number to tech support and I had my answer. A couple of quick measurements and I had my hitch product number. Placed my order online on a Monday, hitch arrived on Wednesday. Drilled the required holes in my vehicle
and I was in business. Fantastic service! Between friends an family we have ordered at least 6 hitches and accessories over the last several years.
Lewis R.
2/22/2014
What are the measurements and demensions of this hitch? I understand that all of the Chevy GMC 1/2 and 3/4 ton pickup frames are the same between 1967 and 1972. My truck is a 1969 C/10 long bed with the coil spring suspension. Will this hitch bolt up onto my frame without having to modify either the frame or hitch?
good piece,,,did excellent on shipping fast!!
Shipping was very fast,customer service excellent, product looks excellent as far as welds...if it wasnt for the numerous scratches,scrapes,etc. would have given 5 stars.
Hitch is beautiful, I give it 6 stars.
I didn't expect to have to drill holes in the frame to attach it. (subtract 2, for extra work)
It’s perfect, you can barely see it, very beefy
Have not used the trailer hitch, only installed as it was one of the early steps in the frame off restoration of my 1964 Chevy truck. It was a bit more work than the videos suggest. After ordering a second hitch that was to fit my truck, I still had to do substantial drilling. Not one hole really lined up. But it sure looks secure and substancial now! Look forward to having a bit more confidence in my hitch while towing.
I went on-line and have a very specific vehicle. I found what I think I needed & then called in. I got Jean P. & she was excellent.
She got me exactly what I needed. Hitch Receiver, Wiring Harnesses
for Lights & Brake controller, etc. She sent me an E-Mail with the specs on everything. She made it so easy, It was a No brainer.
For Quality, and Pricing, e-Trailer can't be beat. I'd use them again
anytime. Probably on e of the best Purchasing experiences I've ever had. No guesswork, No Games, It was a pleasure. Keep up the great Job!!! And, Thank you. Sincerely, Bill T. Sellersville, PA
Talk to the guy about the Curt hitch that went bad and he was very rude, arrogant, and didn’t have any interest in listening to my explanation of what went wrong with the prior hitch.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
6/2/2023
Still great.