etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Well made and quickly shipped. Hardware was included, perfect fit with existing frame holes. Replacement for a rusted away hitch, this one has the receiver tube extending farther out from under the step bumper, more convenient, much easier to get to the pin than before.1746623

I love the hitch. The only problem I had was installing it with one hand. I cut off my left hand about five years ago in a accident . But I did it by myself. Thanks1737745

I ordered a hitch for my farm work truck. It was shipped on time, is of excellent quality, and came with all the necessary hardware. I highly recommend etrailer.1677825

Arrived on time. Awesome fit very easy to Install.and high-quality products. Very happy and pleased.3140844

Super easy install. Finished in about an hour with only a floor jack. Looks great!1621464

Easy to install, just like the site said. Just what I wanted to pull a small camper. Will buy again when needed.1678615

I was really happy with the way it fit and looked excellent product.1400946

Love it 3154883

1777967

1716897

1456410

1684224

1409928

Prompt delivery. Exactly as described. Everything needed for installation with precise instructions. Perfect fit and receiver is flush with bumper. Truck is rated for 5000 lbs, but will only be used for 3000 lb boat or small utility trailer. Thanks again, you guys are great.302633

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: James01/15/2024

Very happy with this trailer hitch.
Very solid construction, easy to install.1711381

I purchased the wrong one by mistake. I have duel exhaust and the one with the inner lip doesn’t fit so i returned it. And they charge w $40 but I tried to exchange it for the right one. I think that was unfair after all I just wanted the right one other than that it’s a nice hitch no pictures I’m not all the way satisfied1193805

by: Bill T04/02/2020

Product installation was super easy.
Basically plug in and go.
No wire nuts or flimsy connectors that are just a source of corrosion.773466

by: Jim W03/07/2020

What can one possibly say about a trailer hitch? It works, that's the bottom line.
The last hitch I had that came with my truck 22 years ago, had rusted so bad inside the receiver tube that the ball mount simply could not be removed, they had rusted together so bad even a torch wouldn't remove them. So when I got the new receiver I coated it inside with "never cease", a compound that's prevents rusting. Hopefully this will work for the next 22 years764002

by: Everett Shockley03/30/2022

It took a couple of new holes in the frame of the truck and a transmission jack to lift and position (it was heavy), it's mounted and really solid. I've pulled my travel trailer, a loaded car hauler and pulled heavy Oak logs out of some timber. I would NOT trade it for a different kind. If I break anything it won't be the hitch.1279700

Fit perfectly onto our truck and installation was easy. I am not sure if this was an issue with specifically our truck but the two holes for the middle mount positions had to be drilled to make them larger to accept the provided bolts. Have been hauling all sorts of stuff since receiving and has done great. The only negative I have on the receiver is that the loops for the chains slightly interfere with the pin for the hitch. I need to lift the pin to get it out of the way to attach the chains.

Overall it does a great job, easy to install, and was a great price.613108

Great hitch. Took me a lot longer than 2 hours because my truck has aftermarket dual exhaust. The mufflers were in the way so I had to cut off the muffler hangers to move the pipes so the hitch would line up. Had to mess with raising the spare tire because the crossover pipe from one muffler to the other was in the way & the front of the hitch was in the way also. Had to line up the spare tire as I raised it. Will be going to the muffler shop so they can reline everything. After all that, the hitch bolted on with no problem. I love how well made the Curt hitch is. My truck is a 1991 Silverado 1500 with step bumper.774600

by: Dan D07/01/2020

One year later and the hitch looks the same as it did the day I installed it.

Etrailer is the best place to get affordable planned trailer parts.825714

Fast and simple. Fits like a glove. Kinda surprised at how near perfect the whole install was. THANK YOU, etrailer.668267

Great product, bolted right in. Took 30 minutes to install. Great product!1586672

by: Henry 03/29/2023

Easy to install. Has performed flawlessly. Shows no sign of weather after a year if use in a northern Nevada.1545553