Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

See what our Experts say about this Draw-Tite Trailer Hitch

• Will Draw-Tite Hitch Fit 1991 Chevy K3500 Dually Long Bed With Extended Cab and Cowboy Bumper
  The Draw-Tite # 41901 will bolt up to the frame it is just a matter of fitting with that bumper. As long as you're willing to modify the bumper or swap it out to allow the hitch to fit you will be able to use this on your 1991 Chevy K3500.
  view full answer...
• Will Draw-Tite 41901 Fit a 1996 Chevy K2500 Truck
  The Curt # 41901 will fit if your truck has a long (8 foot) bed and doesn't have a roll pan bumper. If you have a short bed truck, the Curt # C14081 will work unless you have a roll pan bumper. If your spare tire is on a wheel larger than an 18 inches, the spare tire won't fit under the truck with the hitch in place.
  view full answer...
• Recommendation For Trailer Hitch That Fits A 1997 Chevrolet C/K Pickup With Standard Bumper
  Based on your information, I recommend the Draw-Tite Class IV Ultra Frame Hitch, Item # 41901, which is a confirmed fit for your 1997 Chevrolet C/K Series Pickup with standard bumper. This hitch is specially designed for heavy-duty towing with a maximum weight capacity of 10,000-lbs and a maximum tongue weight capacity of 1,000-lbs. It does not work with short beds. If you have a short bed, I recommend the Draw-Tite Multi-Fit Hitch, Item # 37130. This hitch is specially designed for...
  view full answer...
• Spare Tire Clearance Provided by Curt Class IV # C14081 Installed on 1991 GMC Pickup
  According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install hitch according to the instructions I have linked you to. When install is complete, push forward on spare tire while raising it into position. If your tires are larger than stock size, the spare might need to be completely relocated. The Draw-Tite...
  view full answer...
• Looking for 10K Capacity Receiver Hitch for 1998 GMC K2500 That Fits With Spare Tire In Place
  The Curt Class IV, part # C14081 would work great for you. According to Curt, the spare will need to be dropped temporarily in order to facilitate the installation, but once the hitch is in place, the spare will fit back in its original location. This is possible because the hitch crossbar is kicked back further toward the rear of the vehicle which allows more room for the tire. I've linked you to an installation video.
  view full answer...
• Recommended Class IV Trailer Hitch for 1996 Chevy K1500 That Fits Tight to Bumper
  I'd recommend the Curt Class IV hitch, part # C14081. When installed, the hitch will sit pretty tightly to the underside of the rear bumper, as would the Draw-Tite # 41901 you looked at, but the Draw-Tite model only fits the long bed model truck. I've provided a photo of what the Curt # C14081 looks like installed on a 1997 Chevy C/K Series. I've also linked you to an installation video that you might find helpful.
  view full answer...
  
• Trailer Hitch and Accessory Recommendations for a 1987 Chevy Suburban 1500
  We only carry 1 trailer hitch for the 1987 Chevy Suburban, # 75500. The Ultra-Frame hitch, # 41901, fits Chevy and GMC trucks but not the Suburban. The 75500 hitch can handle up to 7,500 pound gross trailer weight and 750 pounds tongue weight when used with weight distribution. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip,...
  view full answer...
• Recommended Trailer Hitch Receiver For 1998 Chevy K3500
  For a 1998 Chevrolet K Series 3500 Pickup, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41901. This is an extremely sturdy hitch that is easy to install. It will fit a standard or step bumper. For a roll-pan bumper, use # 41522. For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118315 to get a 4 way connection. Then you will want to add the # ETBC7 to get your 7 way connection along with the circuit breakers,...
  view full answer...
• Best Priced Trailer Hitch Recommendation for 1988 Chevy Truck
  Our lowest price hitch that is a confirmed fit for your 1988 Chevy truck is the Curt part # 13028 which would work well for you. It has a 6,000 lb total trailer weight capacity though so as long as that 5,700 lb figure includes the trailer you would be good. Otherwise you would have to go with a higher rated hitch like the Draw Tite part # 41901 which is also a confirmed fit.
  view full answer...
• Will Draw-Tite Trailer Hitch 41901 Fit a 1994 Chevy C/K Series 3500 Crew Cab Dually Long Bed
  The frame on your 1994 Chevy C/K series truck indicates that it is NOT a cab and chassis model (which normally have narrower frames) so you can use hitch # 41901. I have included a link to the installation instructions for you. I also recommend etrailer ball mount # EBMK2416. It includes a ball mount, 2 balls, a hitch pin with clip, and a storage bag. If you need to add trailer wiring use # 118315.
  view full answer...

Do you have a question about this Trailer Hitch?