Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(115 reviews)
Price: $202.26
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75461
Retail:$407.85
Our Price: $202.26
You Save: $205.59
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (115)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75461
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 500 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75461 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87412 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2014 Toyota FJ Cruiser
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Alternate product found
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75461
Average Customer Rating: 4.8 out of 5 stars (115 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Guillermo05/18/2023
2007 Toyota FJ Cruiser
Hitch receiver installation was pretty straightforward. It took me about a hour, since I didn't have a extra pair of hands. Used a floor jack to hold it up while I tightened up that bad boy. Looks like it is quality material at a good price. Box was pretty mangled up by delivery company, but hitch was packed pretty good.
by: Billy03/20/2024
Ordered from Amazon & got wrong one 3 times wasting over 3 weeks & much hassle. Got this one in a few days, packaged so much better & was actually cheaper. Plus they got it right the 1st time.
by: John10/04/2021
Not really sure if two stars is appropriate, I'll let the reader determine that.
My 2" Curt Hitch And 2" Curt C45534 receiver took 45 minutes of grinding in order to fit.
The main problem was a misalignment of the two pieces at the end of the hitch receiver. Doesn't seem right for a new product.
Other than that, instructions were clear and supplies were appropriate for a slightly involved install.
by: Ronald06/24/2021
Very solid and relatively easy install. The install was a little more challenging than the installation video due to the location of the tailpipe right below the location of the three right hand bolts. It was pretty tough moving the tailpipe aside and down to allow a torque wrench to access and tighten the bolts. Very pleased with the look and quality. Staff was excellent and responsive.
Ronald
6/25/2022
Still love it. Very solid.
by: Matthew S.08/26/2014
Fantastic! The hitch was shipped to me only two days after ordering (the extra shipping cost is worth it). I installed the hitch within half an hour, on my own. Although the instructions ask for the exhaust to be dislodged, my 2008 trail teams exhaust setup wasn't in the way, and that disassembly wasn't required. This hitch allowed me to reach my goal of bare minimal hitch display - very low key! All in all, I'm impressed by the quality of service and product. I would recommend it to anyone.
by: Adrianna07/27/2021
2007 Toyota FJ Cruiser
I'm loving my Draw-Tite trailer hitch receiver. Great price, super fast shipping ( 3-4 days) excellent quality. Looks great on my 2007 FJ. I did have this professionally installed by my long time mechanic and I do have an aftermarket Warrior steel bumper. Installation did require the bumper to be loosened and some shims taken out for proper installation. It was no big deal for my mechanic and this receiver is solid as can be.
by: Fran 01/28/2023
2007 Toyota FJ Cruiser
First thing to do is move the tailpipe outward with a racket strap attached to the rear passenger tire rim. Second chase the frame nuts with a M12-1.25 tap. This eased the 15 minute install. Yes I said 15 minutes !! Perfect fit and look. I’m very pleased.
Last month we purchased a 13.5 btu A/C unit for our RV. That install was just as simple but took a few hours. I strongly recommend NOT cutting the shroud to fit the control box. Instead use some planning and brains a it can be mounted in the intake plenum just like the factory mounting. This way you don’t compromise the air tight shroud.
by: JimmyB12/06/2023
2012 Toyota FJ Cruiser
arrived fairly quickly, GREAT customer service, I have another order in the cart already!
by: GENE C. MAINE06/09/2014
2010 Toyota FJ Cruiser
Great product,easy to install on my 2010 FJ Cruser Toyota. I didn,t have the fancy lift or the impact wrench that was in the video.It really only took 3.5 hr. in my driveway, including the wiring harness!All so it was nice to talk with people at E-trailer, they have a clue.No they are not paying me to write this!
Gene M.
6/9/2015
Wonderful no issues at all.Thanks!More companies should be run the way you people run yours!
by: R. FJ11/02/2013
2013 Toyota FJ Cruiser
We installed this on our 2013 FJ Cruiser, it looks good and was easy to install. I bought this hitch as an alternative to buying the OEM Toyota hitch because it doesn't require taking your bumper cover off to install it, adds structure to the area where it's installed, and it doesn't take anymore from your vehicle's ground clearance than the exhaust tip or recovery loop does.
R.d.
3/5/2014
Good comment. Touches on all my concerns... bumper cover work needed for OEM, and ground clearance. The bumper probably provides all the structural reinforcement needed but still a good point. Thanks.
by: David 10/29/2023
2008 Toyota FJ Cruiser
easy to order, quickto arrive
by: Mike02/25/2014
I ordered the hitch using the free shipping option (the slowest) and it showed up the next day! Took me a little while to install since I did it outside in about 20 degree weather in Chicago, but everything lined up great and it looks awesome. Thanks!
Mike
3/5/2015
Thanks Patrick - I have actually sold the car since and just bought another hitch from you guys last week for the new car!
by: Lee08/04/2018
2012 Toyota FJ Cruiser
This product is of excellent quality, and the vendor is first-rate.
It arrived in a few days, and the package of equipment had everything I needed to install it. On the day of deliverey, I even received an email with detailed instructions and a link to their excellent YouTube video.
Lee
8/6/2019
Still perfect after a year.
by: Charles 06/08/2020
2014 Toyota FJ Cruiser
I have a 2014 fj cruiser. I bought the front and rear hitch and an aluminum basket from e trailer. The quality of all 3 products is excellent but the front hitch is a real problem to install on this year truck. You have to cut off two bolts and struggle with attempting to get it on. Finally gave up and took it to my mechanic. Had to drill out the holes to get it on the one side. ........overall I’m happy because all the parts I got were heavy duty well made but don’t kid yourself on self installing the front hitch You have to cut off bolts, need a cheater bar to break the existing nuts and then good luck!! Call your mechanic for this one!
by: Greg H07/27/2017
2008 Toyota FJ Cruiser
Wanted to upgrade the stock hitch on my FJ mostly because the throat on the stock hitch was shallow and my bike rack did not feel as secure as in the receiver of my other vehicle. This hitch is perfect and much sturdier. Install was easy and took less than an hour. This is my third hitch from etrailer and every transaction has been fantastic. Good prices, fast shipping and quality products... thanks!
by: Cohiba11/11/2016
2011 Toyota FJ Cruiser
Great hitch but be forewarned. If you have aftermarket bumper it may not fit without mods on both bumper and hitch. I have a road armor rear bumper that overhangs the frame but just a quarter inch. That overhang had to be ground off. Then there is an angle bracket that goes diagonal to the hitch. Had to cut some of hitch away to make that fit. What was to be a thirty minute job has turned into a 4+ hour job of cutting and grinding. But that is not the hitch fault.
Packaging is great delivery is great. Product is heavy so have two people working under vehicle to install
by: John 09/17/2019
Trailer hitch was installed by my local mechanic. Apparently the wiring harness was a bit tricky. The hitch looks great on the car. I have not used the hitch yet. Hope to try the hitch out in a week or so. Thanks, John
by: B. R05/18/2020
As always etrailer nailed it.
Fit my 2010 FJ perfectly, easy install, has seen heavy usage hauling motorcycles to the woods/track and nary a peep out of it.
Can't beat etrailer price, quality or service.
by: Greg Z03/28/2011
Found the process to install hitch very straightforward. Most difficulty was encountered in removing the vehicle tie down attachment, which uses the same holes to mount the hitch. The bolts were extremely tight and lacking an impact wrench, the box end wrench used needed to be hammered to loosen bolts.
The wiring was a bit more difficult. Clarity of instructions were not what they should have been. It was in the end doable, but required multiple readings and having a bit of mechanical know how.
by: Andy S03/16/2013
2008 Toyota FJ Cruiser
Ordered hitch and wiring for a 2008 FJ.
Easy process ... great price. (Saved over half of what the dealers quoted.)
Excellent communication, support, and follow-through!
A+ for customer service.
The instructional videos were extremely helpful, too.
Not sure how many hitches I'll buy in my lifetime, but e-trailer has earned my business.
by: TJW FJ TTSE08/02/2015
The Hitch Receiver is just what the Dr. ordered. The hardware and quality fit and finish are very nice. The video "How To " etrailer.com provides on the website sealed the deal for me and the price match policy is icing on the cake.
by: Louis07/08/2013
Toyota FJ Cruiser
Etrailer staff was very helpful and delivery was as promised. The receiver bolted up to my Toota FJ Cruiser frame without a problem. The wiring harness waseasy to install with excellent instructions, and it works.
by: Bill C06/12/2014
Toyota FJ Cruiser
Everything was top notch except the paint job. The fit up was perfect (a little tight because I had the FJ undercoated first), was able to install myself (using a manual transmission Jack), and it looks great (compared to the Toyota OEM and U-Haul hitches) as the only visible part is the 2x2 post/neck. I plan on repainting the neck and undercoating the rest...
by: CyndiT08/31/2014
2014 Toyota FJ Cruiser
Excellent . I installed the hitch myself (yes a girl) with a little help from a jack. Only issue was the muffler irons sits directly under the passenger side frame where the three bolts mount. Had trouble with the last bolt not torquing in correctly, but not the fault of the hitch..All responsibility goes to Toyota's frame department.
by: Paul A.02/18/2013
Wow! what a great company. Not only was the price fantastic and the shipping fast, the product was beyond expectation. My friends who were helping me put this on were also impressed. Also, After I received the package I realized that didn't need the wiring. I called customer service and was handled quickly and professionally. I would recommend ETrailer to anyone. Thank you!
25
119
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Will Draw Tite Hitch 2013 Toyota FJ Cruiser Allow Cargo Carrier to Fit with SpareWhen we installed the Draw Tite hitch part # 75461 on a similar 2014 Toyota FJ Cruiser we found that it measured 8-1/2 inches from the center of the hitch pin hole out to the furthest point out on the rear spare. What you will need to do on your luggage rack is measure from it's hitch pin hole center out to the nearest upright portion of the rack that would potentially interfere with the spare. If that dimension is greater than 8-1/2 inches it would fit with the hitch.
view full answer... - Which Video Best Shows How to Install Draw-Tite 75461 Trailer Hitch on 2010 Toyota FJ CruiserSince the trailer hitch Hidden Hitch part # 87412 will be the same in each video, you will want to choose the video that shows a Toyota FJ Cruiser of the same generation as your 2010 Toyota FJ Cruiser. Since the Toyota FJ Cruiser has only had one generation you can watch any of the videos. The design will be the same so the installation will be the same. I have linked to the 2008 video for your reference.
view full answer... - Correct Trailer Hitch for a 2010 Toyota FJ CruiserThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 75461 is a great option for a 2010 Toyota FJ Cruiser and a confirmed fit. The install difficulty is rated as a 3 out of 10 so pretty easy overall. It will work great for towing or hitch mounted accessories like a bike rack. It does not require drilling. I have attached an installation video below.
view full answer... - Is Extension Needed for Rhino-Rack T-Load Hitch Mounted Load Assist on 2010 Toyota FJ Cruiser?To find out if the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar RTL002 will fit beyond the spare tire on your 2010 Toyota FJ Cruiser, there is a simple measurement you can take. Holding a straight edge (like a yardstick) against the back of your spare tire, measure from the center of your hitch pin hole to the straight edge (see accompanying photo). If it is less than 8-1/2" you can use the T-Load # RTL002.
view full answer...
- Towing Capacity of 2007 Toyota FJ Cruiser Based on my research, it looks like the total weight of your 2010 LD Casita Trailer is between 2,200 and 2,500 pounds, depending on the specific model that you have. When looking at the online owner's manual for the 2007 Toyota FJ Cruiser, it shows a maximum trailer weight of 5,000 pounds. WIth these numbers in mind, you will have no issue towing your trailer if you decide to go with the FJ Cruiser. I do recommend verifying the capacity with your dealer or with your copy of the owner's...
view full answer... - Trailer Hitch and Wiring for a 2008 FJ CruiserThe vehicle wiring harness is sold separately from the hitch. For your 2008 FJ Cruiser, you will need the Draw-Tite Class III Trailer Hitch Receiver, item # 75461, and the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118405.
view full answer... - Weight of Draw-Tite Trailer Hitch 75461 For 2011 Toyota FJ CruiserI checked with the manufacturer, and the weight is 34 lbs for the Draw-Tite hitch that fits your 2011 Toyota FJ Cruiser: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75461 I have added a link below to a video showing the install of this hitch on an '11 FJ Cruiser, and also wanted to mention that if you need a trailer wiring harness for your vehicle the correct fit is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118405.
view full answer... - Towing Capacity and Parts Needed to Tow Trailer with 2007 Toyota FJ CruiserYour 2007 Toyota FJ Cruiser has a towing capacity of 5,000 pounds and the 2016 Micro Minnie 2106FBS can weigh as much as 7,000 pounds when fully loaded so I can't recommend towing this with your vehicle. You will want to look for a camper that's a bit lighter and within the FJ Cruiser's limits. When you do choose an appropriate trailer you will need to add a trailer hitch, wiring harness, and ball mount/hitch ball combo to the vehicle in order to tow it. Starting with the hitch I recommend...
view full answer...
- Can Backup Camera be Mounted To Spare Tire Bike Rack on 2013 Toyota FJ CruiserYour backup camera cannot be mounted on the Yakima SpareRide for your 2013 Toyota FJ Cruiser, and this rack isn't compatible with the backup camera, so in order to use a bike rack, you would need a trailer hitch and hitch-mounted rack. For a hitch, the best option is from Draw-Tite because it is the easiest install and good bumper and ground clearance: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75461 When we installed this hitch on a 2013 FJ Cruiser we found it was approximately 8-3/4...
view full answer... - Will the Lets Go Aero BossHog fit a 2012 Toyota FJ Cruiser and Let the Door OpenTo know if you'll be able to clear the Let's Go Aero BossHog, part # H01472, with the rear door of the 2012 FJ Cruiser, you'll need to measure the length of the rear door and how far off the hitch the door sits. The primary contact point you'll want to worry about is the sides of the carrier, which are 7 inches tall. You'll want to measure from the bottom of the door to the top of your trailer hitch. If you have more than 7 inches, you'll clear the carrier easily and then also know how...
view full answer... - Would Swagman Bike Rack S63400 Fit a Toyota FJ CruiserYes, the Swagman Bike Rack part #S63400 should clear your rear spare tire. When we installed the Draw Tite hitch part # 75461 on a 2007 FJ Cruiser like yours we found that there was a distance of 8-1/2 inches from the pin hole out to the furthest point out on the spare. The Swagman bike rack has 11-1/4 inches from it's pin hole to the lower part of the rack and 14-1/2" to the upright mast of the rack so it should clear with room to spare. You would need to double check this measurement...
view full answer... - Bike Rack Solution for 2010 Toyota FJ Cruiser with Rear CameraSince your 2010 Toyota FJ Cruiser has a backup camera your best bike rack solution is going to be with a hitch rack instead of a spare mounted rack. So first you'd need a hitch installed like the Draw Tite # 75461 so that you could install a bike rack like the Hollywood Racks Trail Rider # HR200Z.
view full answer... - Trailer Hitch and Brake Controller Recommendation for 2007 Toyota FJ CruiserYou will need to start with a 4-way (if you do not have one). For that you would want the # 118405. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
view full answer... - Cargo Carrier And Cargo Bag Compatible With 2007 Toyota FJ CruiserYes, the 24x60 Pro Series Cargo Carrier for 2" Hitches will fit any 2 inch hitch receiver. The Pro Series Cargo Carrier - Steel - 500 lbs # 63153, is a sturdy carrier that has a nice powder coat finish for rust resistance. This cargo carrier has a raised shank that elevates carrier platform by 2-1/2 inches for improved ground clearance. It has side rails to help keep cargo in place and provide multiple tie-down points for the load. I recommend using the Anti-Rattle Trailer Hitch Receiver...
view full answer... - Spare Tire Bike Rack for a 2014 Toyota FJ CruiserUnfortunately FJ Cruisers with backup cameras can't have spare tire bike racks installed because of how the backup camera is mounted on the vehicle inside the spare tire cover. There is not a plate available to make a spare mounted rack work on one equipped with a backup camera. You can however install a trailer hitch like the the Draw-Tite Class 3, part # 75461 and carry a trailer hitch mounted bike rack. Because of your standard spare tire, you'll need at least 9 inches from the hitch...
view full answer... - Recommended Hitch-Mounted 4-Bike Rack for 2011 Toyota FJ CruiserThere are a number of great options for a 3-bike or 4-bike rack for your 2011 Toyota FJ Cruiser for a 2" trailer hitch like the Draw-Tite Trailer Hitch # 75461, and the best is going be the Swagman Trailhead 3-Bike Rack # S63365 or Swagman Titan 4-Bike Rack # S63410. These racks are the best because they are lightweight, making them easy to handle, as well as more affordable than other options while not sacrificing on quality. Additionally, please keep in mind you'll need Bike Frame Adapter...
view full answer...
- Will Swagman Original Bike Rack Fit 2011 Toyota FJ CruiserThe Swagman Original bike rack part # S64400 that you referenced will fit your 2011 Toyota FJ Cruiser and clear the rear spare of the vehicle as long as you have a hitch installed like the # 75461 which is a 2 inch hitch confirmed as a fit for your vehicle. You could also look at the 3 bike rack to this is the Swagman Original part # S64152-2 .
view full answer... - Will Thule T2 Pro Bike Rack Clear Rear Spare of 2007 Toyota FJ CruiserThe Thule T2 Pro XTR part # TH69XT probably will not clear the rear spare tire of your 2007 Toyota FJ Cruiser. When we installed the Draw Tite hitch part # 75461 on a 2008 FJ it had a distance of 9 inches from the center of the hitch pin hole to the outside of the spare tire. The # TH69XT only has 7 inches from it's pin hole to the nearest wheel tray so it would not fit on your Cruiser if the 9 inch measurement is correct. The Saris Freedom Bike Rack for 4 Bikes - 2" Hitches - Frame Mount...
view full answer... - Can Spare Tire Bike Rack be Used on a 2011 Toyota FJ Cruiser with Spare Tire Backup CameraThe phrase "without spare tire mounted backup camera" means that if the 2011 Toyota FJ Cruiser has a spare tire backup camera the rack will not fit. Models that do not have a camera mounted at the spare will not have a problem. Since your FJ does have the spare tire mounted backup camera none of the spare tire bike racks will fit but there is another way to carry bikes at the back of the vehicle. You can install a trailer hitch such as # 75461 and use a hitch mounted bike rack. The Thule...
view full answer... - Will Thule T2 Bike Rack Clear Rear Spare of 2008 FJ CruiserThe Thule T2 Pro XTR part # TH83JV will not clear the rear spare tire of your 2008 Toyota FJ Cruiser. When we installed the Draw Tite hitch part # 75461 on a 2008 FJ it had a distance of 9 inches from the center of the hitch pin hole to the outside of the spare tire. The # TH83JV has 7 inches from it's pin hole to the nearest wheel tray so it will not fit. We do have a platform bike that will clear while in use, but not when it is folded. The Kuat NV 2.0 Base Bike Rack for 2 Bikes -...
view full answer... - Best 2 Bike Rack Recommendation for 2010 Toyota FJ Cruiser to Clear Rear SpareThe Thule T2 Pro XTR part # TH83JV will not clear the rear spare tire of your 2010 Toyota FJ Cruiser. When we installed the Draw Tite hitch part # 75461 on a 2008 FJ it had a distance of 9 inches from the center of the hitch pin hole to the outside of the spare tire. The # TH83JV has only 7 inches from it's pin hole to the nearest wheel tray so that would will not work. Check out the Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black # BA22B. It has 11-3/4...
view full answer... - Which Class III Trailer Hitch Receiver for 2008 Toyota FJ CruiserWe offer two different trailer hitch receivers for your 2008 Toyota FJ Cruiser (so long as it does not have the auxiliary fuel tank option), the Draw-Tite # 75461 and the Curt # 13367. Both offer the same 2-inch receiver opening, 500-lb tongue weight rating and 5000-lb tow rating. Both install without drilling or welding required. I have included a link to the hitch page for your FJ Cruiser where you can see these products. Installation videos are included. It is not advisable to weld...
view full answer... - Trailer Hitch Bike Rack Recommendation for 2007 Toyota FJ Cruiser and 2015 Subaru XV CrosstrekIn order to know if a bike rack will clear the spare tire on your 2007 Toyota FJ Cruiser, we will want to measure the spare tire clearance. In order to find this, you will want to measure from the center of the hitch pin hole to the outside of the spare tire. I have attached a help article on finding this measurement. When we installed the Draw-Tite # 75461 on a 2008 FJ Cruiser, we found it to measure 9 inches from the center of the hitch pin hole to the outermost point of the spare tire....
view full answer... - Spare Tire Bike Rack for 2009 Toyota FJ Cruiser With Backup CameraThere is a spare tire mounted bike rack that could work for your 2009 Toyota JF Cruiser so long as the spare tire is no more than 15" wide. If so, you would only need to remove the spare tire cover like you mentioned, and you could then use Hollywood Racks SR1 # HRSR1. This is a 2-bike carrier that uses cradles with rubber straps in order to secure your bikes to the rack. It has a weight capacity of up to 35 lbs per bike and mounts around your spare tire using a brace and straps. Please...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Jameson C
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Randy B
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
10/21/2021
Sometimes it is true that powder coat paint build-up needs filing in order to piece together your hitch and the ball mount item # C45534 that you ordered, correctly. Since you already filed, my suggestion would be to cover it in anti-corrosive paint and lubricate when using the accessory.
Helpful Links
faq-rust-prevention-maintenance.aspx
Trailer-Hitch-Ball-MountCurtC45534.html