To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Chevrolet Silverado's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
Note: Fits models with a 34" wide frame.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside
Complete Towing Package for 2006 Chevrolet Silverado
2006 Chevrolet Silverado Owners Who Purchased This Trailer Hitch Also Bought...
Popular Silverado Trailer Hitch Accessories
Average Customer Rating: 4.7 out of 5 stars (123 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Great product, great quality, comes with all mounting hardware. Free shipping and was delivered just two days after ordering. Only complaint is that it’s advertised to only have to drill out the rivets in the back of the frame but on my truck (2022 ram 4500) you have to drill every hole. Also says you need a 25/32” drill bit which to me is too big, I used a 5/8” and the hole is the perfect sizeOther than that it was easy to install as long as you have the right tools. I order all my hitches and related products from etrailer and will continue to do so.
The hitch was good. The holes didn't all line up. The directions called for 19/32 drill bit that was too small for the bolts supplied. It was a 5/8ths bolt and so i needed the same size drill bit. The box was beat up and the hitch busted through the box. The hitch had scratches that broke through the paint. Send some padding in the future.
Jenny N.
5/12/2023
It sounds like the side brackets could have been flexed out of alignment since the hitch had also broken through the box. We do have a FAQ that can help with that. I will also have Customer Service reach out to you about the scratches that the hitch received.
Helpful Links
We replaced our original RV hitch with this one because the original one bent due to pressure from our spare tire holder. This hitch is very heavy duty and has been working well for nearly a year. Highly recommended!
2016 Dodge Ram Chassis Cab, 9' bed, 34" frame rails.
Extremely beefy trailer hitch. Easy to install, especially with no bed on the truck. The two rear rivets on the Ram frame rail are time consuming to drill out. Clears the rear 52 gallon fuel tank with no problems. It should be noted that the holes where the safety chains would hook are very beefy as well so small chain hooks will not work. Shackles will solve that proble and be more secure at the same time. I'm very happy with my purchas of this hitch and etrailer.com did a great job helping me find the correct hitch and shipping it out fast.
AllYourBaseAreBelongToUs
This is and always has been a superior product for my use. This hitch is ultimately the best choice to put on our Semi Trucks. It gives me the ability to haul more freight. Now I can haul any reciever hitch or pintle hook load along with my standard 5th wheel loads.
Being in the Power Only industry versatility is key to our business... Outstanding Product
Great customer service, incredible product. Delivery was early. Thank you for everything!!
Lu T.
12/5/2023
Great
Very well built, heavy, didn't fall off. Would tow again
Came earlier than expected. Fit my 01 gmc 3500 cab and chassis great. Easy install. Found it cheaper here than anywhere else. etrailer is always the first place I look when I need just bout anything for my truck or rv.
This trailer hitch is very well built.
Always concerned when pulling a heavy load down the highway. This hitch is rated for as much weight as my one ton truck is. I have no doubt this hitch will last as long as the truck
Just received the hitch. Looks heavy duty. etrailer was fast, friendly, and very helpful. Big thumbs up! Can’t wait to install it this weekend.
The product is excellent
The instructions say a professional can install in 30 minutes which is impossible because it will take an hour, or more, just to drill holes
I purchased this hitch for my 2022 Ram 5500. The hitch arrived lightning fast and installation was very simple. The hitch arrived with all the necessary Grade 8 bolts and the entire installation took less than 30 minutes. I did have to drill two holes but that was no issue and it was probably due to the fact that I have a cab and chassis model. The hitch is nice and square and tows well. After a trip from Texas to Washington state all the hitch bolts are still tight and the hitch is still nice and square and the finish looks resilient.
NOT PACKAGED WELL. IT WAS MISSING AND DIRECTION/PAPERWORK AND THE HARDWARE WAS NOT INCLUDED.
Katrina B.
2/10/2023
It looks like we missed the boat on this one. I will have our customer service department reach out to you to get this corrected.
fit good and was promptly delivered.
i think it needs side plates also
took longer to install than what it said , but that's typically the case. It was a relatively smooth install. I just takes a minute to drill through frame metal.
Delivery was very fast. Just wanted everyone to know drilling is required. Or I guess you could have it welded on. Not my choice in case of damage to hitch.
Very sturdy, good welds, easy install with no mods required.
It was a perfect fit for my M35A2 could not ask for anything better will recommend to all my friends
Great product
Hitch was installed on a 2015 Chevrolet 3500 with dual fuel tanks.
This hitch fit behind the fuel tank skid plate mounting bolts without relocating the skid plate mounts. The middle bolt lined up over the crossmember requiring a factory rivet to be drilled out, but the hitch is then mounted to two layers of frame
The hitch itself is very well made, the bolt flange is true to the truck frame, good mounting hardware included. it has a flat bedliner type finish on it.
Fitment of the hitch was as advertised. Shipping was quick (A day earlier than expected). So far we have ordered multiple hitches and axle parts from e trailer and never been disappointed with any of them. Keep up the good work guys. You are our go to trailer and hitch company.
it fit- required drilling holes in Frame but everything looks good
etrailer had the best price for this hitch everywhere else was over $300 before shipping I got the hitch and 3day shipping for $xx.xx and some change.. install was easy but drilling the frame is pain in the butt just because of how solid the metal is.. the instructional video explained everything I needed to know and made the install a breeze.. instructions do come with the hitch however I only referred to them for torque specs.. if you’re mechanically inclined you and a buddy can have this installed in no time.. THIS HITCH WILL WORK WITH A SERVICE BODY THAT HAS A REGULAR J-MODEL BUMPER WITH LITTLE TO NO ISSUE.. I replaced a jerry-rigged POS hitch some “fabricator” made that ultimately almost destroyed the bumper and could’ve killed someone
The receiver hitch is heavy duty and looks to be well built. It fit perfect on my truck, the only tough part about it was working around the flatbed that I already have on the vehicle. So from my personal experience if you don't already have a bed on your truck, put the hitch on prior to putting the bed. It would make the install process much easier. Overall a great product and I would recommend to anyone in the market.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Braxton
2/27/2024
Still doing great, looking to get one for my 08 ram 3500