Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(498 reviews)
Price: $203.10
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13204
Retail:$291.95
Our Price: $203.10
You Save: $88.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (498)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13204
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 525 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13204 Curt 2" Class 3 Trailer Hitch Receiver
Replaces 13168
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2020 Nissan Rogue
- 2010 - 2011 Nissan Rogue excluding Krom
- 2014 - 2015 Nissan Rogue Select
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13204
Average Customer Rating: 4.9 out of 5 stars (498 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Marc the Cop12/03/2023
Always great products from Curt. It took longer to wire the trailer lights than it did to install the hitch!
by: Kevin 03/07/2024
I'm very happy with this purchase. I use the hitch for my bike rack. I have not towed with it yet. The installation took about 45 minutes and I recommend having a car jack or second set of hands to lift the hitch into position.
by: Clyde07/20/2023
Great product and price. As per their website, this fits perfectly with my 2017 Nissan Rogue. It only took the guy at the garage 30 minutes to install. Looks great! Thanks.
by: Ken S09/23/2016
2015 Nissan Rogue
Love the hitch but it was a little painful to install.
It's not eTrailer's fault. When bolting up the trailer one of the bolts
would not line up. The holeI was off by 1/32 of an inch. No matter how you
arranged the five bolts it would always be one on the four corners of the
hitch that would not line up properly. After 2 hours I finally got it
installed. Added a Thule Trailways 959 Bike Rack to the mix and I love it
even more! Next is to install the wire harness for a trailer. FYI you can
reinstall the 2 panels you take off for installation. The passenger side
goes on just fine and you have to trim off small section to get the drivers
side panel back on. Just trial fit it, mark it, cut, and reinstall. Helps
to keep the dirt out too.
by: Edwin 07/22/2022
NO PROBLEM WITH EQUIPMENT. ALREADY HAUL SOME SMALL ITEMS. CANNOT WAIT YOU SEND ME THE HITCH BIKE RACK PLATFORM I ORDER FROM YOU TO GO BIKEING OFF ROAD. MIL GRACIAS/THOUSAND THANKS.......................
Edwin H.
8/19/2023
Sorry late reply.all is good. Only bolts rusted.Im doing an upgrade in that area. Instead of 8 bolts Im making it 4 bolts and a pvc cover for the bolts to cover it fm top to bottom for less rusting and coating bolt with rust proof chemical. GraciasThank You for asking. Maybe send u picture what I done. Will tslk soon. Making an order soon.
by: Michael08/31/2020
Awesome and thank you so much!
Here is my review of the trailer hitch:
Needed a hitch for my 'new to me' 2015 NISSAN Rogue. Fairly easy self-install using wood blocks to support hitch weight. Hardest part was plastic trim fastener plugs near the rear axle because it's hard to see when you are on the ground. Took 2 hours which included a 1 hour trip to Lowes because I realized I didn't have the right size sockets. D'oh! The hitch is rock solid and perfect for my RockyMounts Backstage. My 3rd time purchasing from etrailer - great install & research videos. Bonus was the price went down $xx.xx three weeks after I ordered it. I called and they refunded the difference. That's why I choose etrailer.com -Wow!
by: Scott04/21/2021
Absolutely amazed and pleased with etrailer! In the world where the past 20 + years customer service Was sacrificed on the altar of competing for the big box brick or Online cheapest product. etrailer has great pricing and products but more importantly the product knowledge, comparison listing, specific detail videos and photos, timely shipping and detailed instructions specific to the vehicle shows to great lengths and effort “they chose” to become the best at what they do. The moral of the story “you don’t have to cancel customer service and excellence to bring pricing and availability to the client”... meaning everybody else is just lazy!.
Thank you!
2018 Nissan Rogue: everything went perfectly as directed including the Curt harness. I did choose my own modification as pictured : pic: I removed the driver side rear trim as instructed. But I trimmed the plastic, cutting a straight line to the back and along edge so It now clears the hitch bracket, and easily reinstalled it.
by: A-Gospo02/11/2017
2015 Nissan Rogue
Incredible savings!!! I bought this hitch last year- self installed-Thank you!!!!!
My friends paid up to 400% more for their hitch and installation.
Very easy to do with video instructions from etrailer.com. I am 47 chubby guy and installed by myself.
Freaking awesome. I use it every weekend for cycling rides, landscape trailer.
Perfect for my Nissan Rouge.
I am glad I made this purchase- highly recommend. Be not afraid.........
Fast shipping, easy installation, and huge savings!!! (4 road bikes)
by: John C.10/11/2017
Nissan
This order came in promptly and fit the vehicle attach points. The hitch is solid built and appears to have a good paint job. It took me about 30 minutes to install. The manufacturer's instructions specified 86 ft-lbs of torque on the bolts which was hard to get with my torque wrench which has a 19 inch handle (not enough length for me). There were two bolts on each side vs four on the Nissan factory hitch (which is offered only as an inch and a quarter receiver size. This made me a little nervous about the capacity of the hitch since the bolts were the same diameter on the Curtis hitch but half as many. The side mounting plates on the Nissan hitch were not present on the Curtis which, by design take a lot of the torsional load in a braking situation. The photos show the Nissan hitch which you can compare to the Curtis product photo to see the difference. I am going to use this hitch but only plan to have light loads on it so expect it will be strong enough for that.
by: Robert04/20/2018
2011 Nissan Rogue
The entire process of selecting, acquiring, and installing this trailer hitch and electrical connection was one of the best I've every experienced. The website and detailed installation videos were spot-on, even down to identifying where the job would get "a little tough" and how to prepare for it. Total hitch and electrical installation time was 2-1/2 hrs, including having to run a battery supply "+" wire all the way up to the engine compartment. Etrailer.com selection,, installation instructions, support, and follow up was outstanding! Exceptional experience all the way around and thank you - you made it affordable and easy!
by: Jamie07/23/2018
2016 Nissan Rogue
As a recent arrival to the US I discovered tow hitches are not at all the same as they are in the UK! The etrailer website made it really easy to find what I needed for my Nissan Rogue and it arrived by courier in just a couple of days. The hitch receiver and electrical hook up were straight forward to fit to the car. I didn't need to drop the exhaust as indicated in the instructions as it can be raised into position on the driver's side and held in place by the 3 partially-fitted bolts before raising the passenger side to do the same and then tightening all 5 bolts. The instructions also suggest removing the plastic covers to the rear of the wheels and not refitting then but since they are there to protect the underside of the vehicle, I put them back. The drivers side cover does need to be modified though as per my pictures. All in all a much easier job than I was anticipating and a good sturdy set of products. Very happy with this purchase.
by: Patrick 12/28/2023
The box was punctured by the hitch and sticking thru the box but the hitch itself was not damaged
by: Efrain08/29/2020
2013 Nissan Rogue
Highly satisfied!!!!!
etrailer is the best!!! I had a great experience from the very beginning, I had a question and Mike L answered it clearly, that showed me etrailer really cares. I ordered the hitch for my Nissan Rogue 2013 , it came as scheduled, it fitted perfectly, no problem at all!!! It took about 15 minutes to mount, please see pictures attached, I highly recommend etrailer, they really know their job!!
Thanks so much!!
by: CP in CT10/07/2021
2016 Nissan Rogue
Great experience with etrailer. Best price I found on a hitch also. Delivered fast and though box had a few holes the hitch was intact and bolts were well packaged and taped securely. Decided to install myself after watching their video - no problem at all. Video was spot on and everything went pretty smoothly, the hardest part for a novice was removing the appearance panels with the little plastic clips. I attempted install without lowering exhaust as instructed and it worked out fine with a simple ratchet extension; since I was alone I used a few boards stacked up ( and screwed together for safety) to rest the hitch on, then simply tipped up one side at a time to get the bolts started. Took me about an hour overall, but would be less with right angle power ratchet as seen in video. Thanks etrailer!
by: Hope05/26/2020
The trailer hitch was so some to install. I was amazed. I did the install alone and had no issues. Great purchase..
David L.
5/27/2021
Great no issues
by: Jeff H07/04/2019
I needed a hitch on my 2017 Nissan Rogue to pull a small trailer and utilize a bike carrier I already own. I priced 3 different places for a hitch install prior to my order. I did a little research and saw how easy it was to do the install myself. You can do the math, but I saved 68%.
I placed my order July 1st. It was in my doorstep July 3rd. I installed the hitch in about 30 minutes. I used my .410 bore brush and some WD40 to clean the threads on the frame of the vehicle.
The holes lined up and the hitch fit perfectly. I’m not a mechanical guy. If I can do it, so can you. I highly recommend this hitch and etrailer.
by: Todd08/06/2020
This was delivered fast and was easy to install by myself in about 35 minutes. I did not need to loosen the exhaust system and used a tire jack to hold up one side while bolted the other side in place. Great hitch.
by: Ricky05/02/2020
This was my second purchase from the trailer for a Curt hitch. The first one I bought had a smaller receiver and this one has a 2” they both fit perfect and even the old one is still great. I went back to etrailer for this 2nd one because I trust them and they ship really fast.
by: Nick S07/09/2020
Package arrived quickly and with all parts intact and great instructions. Secure packaging as well. The hitch is very strong and secure. Barely noticeable under the SUV. Perfect for Bike Rack!
by: Craig07/14/2019
(2012 Rogue) After about 45 minutes of prep work the hitch was mounted in place in about 15 minutes (including time to torque all 5 bolts). With an extra set of hands there was no need to drop the exhaust - easy to get around the tailpipe. Also, no issues with alignment of holes.
by: Wilfred04/08/2024
Perfect fit!
by: Kyle03/18/2021
I use it exclusively for hauling a bike rack and for a trailer rack for carrying a cooler. Definitely has done a great job and was easy to install.
by: Robert07/08/2020
Installed on my 2020 Nissan Rogue SV
Took 45:00 minutes fit Was perfect
Video instruction On your web site was very
Helpful Also the ordering and shipping process
Was excellent Easy to track
Glad I purchased item from etrailer
by: Blaine03/07/2023
Install was clean. Needed some help from my wife just to hold it in place while everything got torqued down. Finish seems to be holding up well also we are in the Midwest so snow water stuff on the roads to keep the ice off are constant things to deal with but everything appears to be in good condition. Have hauled a trailer with my Nissan rogue several times and have had no issues. This also save me a fair amount of coin by not taking it somewhere and having it done professionally. The amount of work needed and the basic tools make it accessible for anyone to install as long as they have some mechanical knowledge and are physically able to get under the vehicle for the work. Great product.
by: Angel11/26/2021
2018 Nissan Rogue
The box was ripped everywhere. The hitch was dented and scratched everywhere. Now I'm going to have to go buy paint to touch up all the spots to prevent rust. If I wanted a damaged hitch I would have bought a used one online. I have no time to return and wait for a replacement, which will probably be damaged as well, or wait for a refund. Wanted to upload all the photos, but if course will only allow one and the upload is taking forever. I guess I should have went to [another store] and just paid the extra 10 bucks,and picked one up in person.
25
498
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Class III Curt Trailer Hitch Receiver for Nissan Rogue It is rare, but sometimes the hitches are shipped with some missed weld spatter that should have been cleared. Yes, you can simply file that off of your Curt Trailer Hitch Receiver, # C13204 and be just fine. Some Class I hitches may have a weld stop in the tube to prevent the use accessories that are only intended for higher rated hitches. Your hitch is rated at Class III so that is not the situation, you have have weld splatter and not an intended weld stop.
view full answer... - Determining If Hitch Rider Truckee Trike Rack Fits 2016 Nissan Rogue W/ Curt Trailer Hitch C13204I would be happy to help! I took a look at the Hitchrider Truckee Trike rack you mentioned but was unable to find any information regarding how much clearance from the center of the hitch pin hole to the outside edge of the rear bumper is required for the rack to work properly without interference issues. The Curt Trailer Hitch Receiver # C13204 you were looking at for your 2016 Nissan Rogue measures 4-1/4" from the center of the hitch pin hole to the most outward part of the rear bumper,...
view full answer...
- Best Trailer Hitch for 2018 Nissan Rogue to Carry 4-Bike RackA Class I trailer hitch is limited to carrying a maximum of two bikes so you will not be able to use your Thule 4-bike rack with the hitch that is currently on your 2018 Nissan Rogue; you will need a new trailer hitch. The best trailer hitch for your '18 Rogue is the Curt # C13204 because it offers the best bumper clearance among the available hitches with a 2" receiver. The accompanying photo shows the 6 inch distance from the hitch pin hole to the edge of the bumper on a 2018 Rouge with...
view full answer...
- Exhaust Hanger on 2011 Nissan Rogue Interferes with Trailer Hitch InstallationYou should be able to bend the exhaust hanger a little bit to allow the hitch to fit easily on the vehicle. The installation instructions state that lower the exhaust will make installation easier. If you remove the exhaust from the rubber hanger, using a strap of some kind to support the exhaust some, put the hitch in place and then put the exhaust back up on the hanger it might not interfere at all. If it still does then bending the hanger some is perfectly fine and will not hurt anything....
view full answer... - Fit of Hollywood Racks # HR200 Trail Rider with Curt Class III Hitch # C13204 on 2012 Nissan RogueThe Curt Class III hitch, part # C13204 and the Prorack # PR8062400 would be compatible with each other. Both would work great on your 2012 Rogue. When installed, the hitch pin hole would be recessed under the vehicle by about 5 inches. The shank on the bike rack measures 12-1/2 inches between the hitch pin hole and the closest portion of the rack. This would offer plenty of clearance. I've linked you to an install video, a product video and an FAQ article that you might find helpful.
view full answer... - Is it Dangerous to Exceed the Tongue Weight on a 2015 Nissan Rogue SL.Although a hitch like the Curt # C13204 has a maximum tongue weight of 525 lbs you are limited by the 100 lb tongue weight of your vehicle. Trying to carry your scooter and its carrier could result in various problems since you would be 200 lbs over the capacity of your 2015 Nissan Rogue SL. The hitch may rip off of your vehicle since your vehicle isn't designed to carry that much weight. It could also overload your rear tires, making it difficult to control your vehicle and also brake....
view full answer... - Does Curt Hitch C13204 Fit 2019 Nissan RogueYes, the Curt hitch part # C13204 that you referenced is confirmed as a fit for the 2019 Nissan Rogue like you have and would be a really great option. It still has the highest tongue weight capacity of all of the available options. I attached an install video for this hitch on a similar 2018 Rogue for you to check out as well.
view full answer... - Tongue Weight Rating For a 2018 Nissan Rogue With a Curt Trailer Hitch Receiver # C13204Generally you are not able to increase your tongue weight rating on your 2018 Nissan Rogue, you can reach out to your local Nissan Dealer to verify this for your specific model. They are the only ones that can tell you what your specific weight capacity is on your specific trim level with your factory installed options. While the Curt Trailer Hitch Receiver # C13204 is rated for 525lbs of tongue weight and the owners manual of your Rogue shows a maximum trailer towing tongue weight of...
view full answer... - Will Curt Class III Trailer Hitch C13204 Fit a Nissan Rogue With a Decorative Splash PanelSome models of the Nissan Rogue have underbody panels that will need to be removed to install the Curt Class III Trailer Hitch, # C13204. The underbody panels will not be reinstalled. The panels must be removed to expose the attachment points for the hitch at the frame rails. These panels are not visible unless you are under the vehicle. I have attached a link to the installation instructions and an installation video that shows our technician removing the underbody panels for you to...
view full answer...
- Maximum Tongue Weight Capacity for 2018 Nissan RogueI took a look at the online version of the owner's manual for a 2018 Nissan Rogue and it does state that the "Maximum Tongue Load" is 110 lbs, like you mentioned. Even if you are not towing a trailer this would apply and you do need to go by the lowest-rated capacity when towing or using accessories. So if you were to install the Curt Trailer Hitch # C13204 on your 2018 Rogue, which has a 525 lb tongue weight capacity you would have to abide by the 110 lb capacity of your vehicle. The...
view full answer...
- Troubleshooting Trailer Hitch Install Hardware that Won't Thread InThe problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely. What you'll need to do it clean the weld nuts out so that you can thread the included bolts. I have included...
view full answer... - Troubleshooting Hitch Hardware that Seems to Large to ThreadWhen we hear about hitch hardware seeming too large to fit the weldnuts of a vehicle the problem is always that the weldnuts on the vehicle are dirty/rusty and aren't allowing the bolts to thread all the way. This is such a common problem we made a help article and video dedicated to fixing the problem that I attached to this page.
view full answer... - Does Installing Hitch on 2018 Nissan Rogue Require Removal of Bumper Although installing a hitch like # C13204 would require trimming or removing the under body panels (if so equipped), installing the hitch would not require removing the bumper beam or bumper cover. Some hitches will take the place of the bumper beam, that that isn't the case with the hitches available for the 2018 Nissan Rogue. The US manufactured # C13204 is what I'd recommend. If you click the provided link, you can see a video showing the entire installation of a 2018 Nissan Rogue like...
view full answer... - Are Underbody Panels Required to be Removed to Install the Curt Hitch # C13168You would not be able to tell that the underbody panels have been removed on your 2014 Nissan Rouge unless you were under the vehicle. There are two pieces that will need to be removed. Check out the picture I attached to see the two pieces that get removed. All the necessary hardware to install this hitch is included. I also attached a link to installation instructions for you to check out also.
view full answer...
- 2017 Nissan Rogue Hitch HardwareYou would order the Replacement Hardware Kit for Trailer Hitches, part # RHK. If you order that part number and provide the hitch model and we can get replacement parts for you. If you want to pick up the hardware locally you will need 5 M12x1.25,35,CL10.9,YZ 5 WASHER,S-CON,1/2,YZ. When installing the conical washer's teeth should be directed towards the hitch receiver.
view full answer... - What Vehicles does the Curt Hitch # C13204 Fit?From the numbers you provided, you have the Curt Hitch # C13204 (Curt model number 13204). This particular hitch is confirmed to fit the following years and vehicles: - 2008-2020 Nissan Rogue - 2014-2015 Nissan Rogue Select - 2010-2011 Nissan Rogue (excluding Krom) I also attached a video showing the installation process on a 2017 Nissan Rogue. Please note that this hitch includes mounting hardware. If you need replacement hardware, you will use the # RHK part and type in "C13204" in...
view full answer... - 2 Inch Curt Hitch Recommendation for a 2014 Nissan RogueCurt recommends the use of the stabilizer strap like part # 18050 with all of their 1-1/4 in hitches and some of the 2 inch hitches, but not the 2 inch hitch available for your 2014 Nissan Rogue. The Curt Hitch part # C13204 that you referenced would be a great hitch for you since you would rather not use a stabilizer strap, and because a 2 inch hitch has more capacity and has more options for hitch accessories than a 1-1/4 inch hitch. This hitch should do very well carrying a 2 bike...
view full answer... - Hitch for 2019 Nissan Rogue that Allows Use of Hands Free LiftgateThe Curt hitch # C13204 that you referenced does not prevent you from being able to use the handsfree liftgate of your 2019 Nissan Rogue. You'd just need to kick your foot to either side of the hitch opening and the gate will open. I attached an install video for this hitch for you to check out as well. If you were looking for trailer wiring too the very easy to install and reliable Tekonsha kit part # 118480 is the way to go as well!
view full answer... - Trailer Hitch Options for 2015 Nissan Rogue for Use with Bike Rack & Cargo CarrierWe offer both 1-1/4-inch Class II and higher capacity 2-inch Class III type hitches for your 2015 Nissan Rogue, but for your application with bike and cargo carriers I recommend a Class III hitch such as the Curt # C13204. Bike and cargo carriers place a substantial tongue weight (TW) load on a hitch and the Curt # C13204 offers the highest of all available options - 525-lbs. Class III hitches also offer better compatibility with accessory items like bike and cargo carriers. All Class...
view full answer... - How to Determine Location of Hitch Pin Hole on Class III Hitches Installed on 2014 Nissan RogueI went to our warehouse and measured each of the three 2-inch Class III hitches that fit your 2014 Nissan Rogue to confirm which will provide the best clearance for a bike rack. What I did was measure from the center of one of the rear-most mounting holes on the hitches to the center of the hitch pin holes. I went this route since the hitch attachment points on the car's frame do not vary, but the actual position of the flexible plastic rear bumper cover could. Plastic bumper covers are...
view full answer... - Will Hitch Installation On 2020 Nissan Rogue Affect Operation of Rear Hatch Lift SensorsInstalling a trailer hitch receiver on the 2020 Nissan Rogue such as as the Class III Draw-Tite Max-Frame Trailer Hitch Receiver part # 75902 or the Class III Curt Trailer Hitch Receiver part # C13204 will not affect all of the sensors for the rear hatch lift. It may block the center sensors but the sensors on each end of the bumper will still be functional. The installation of both hitches are the same and they both have a concealed cross tube design. The only portion of the hitch that...
view full answer...
- Stabilizing Strap for Platform Bike RackI believe what you're looking for is the Curt Hitch Mounted Accessory Stabilizing Strap, part # 18050. I've linked to a video showing how the strap is used. Even though you're planning on using a strap, be sure that the combined weight of your bikes and the bike rack doesn't exceed the tongue weight capacity of the # C13204 Curt Class III hitch, which is 525 lbs.
view full answer... - Curt Hitch Receiver for Handicap Mobility Scooter on a 2016 Nissan Rogue I would be happy to help you and I have a great hitch receiver for you. It is the Curt Trailer Hitch Receiver item # C13204. I recommend getting a class III hitch with the highest tongue rating possible for your carrier and scooter and this one is it. You will want to check with your vehicle's owners manual or the inside door sticker to see what your Nissan Rogue's maximum tongue weight is. The maximum tongue weight of the Curt hitch receiver is 525 lbs. This receiver has a 6/10 on difficulty...
view full answer... - Recommended Trailer Hitch Receiver For 2014 Nissan Rogue SelectThe correct trailer hitch for your your 2014 Nissan Rogue Select is the Curt Trailer Hitch Receiver # C13204. For wiring you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Video by:
Andrew L
Updated by:
Lindsey S
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video Edited:
Jonathan Y
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken S.
9/23/2017
Great as the first day I i stalled it.