Determining If Hitch Rider Truckee Trike Rack Fits 2016 Nissan Rogue W/ Curt Trailer Hitch C13204

Question

Question:

Wondering if this curr will work with the hitch rider truckee trike rack? It comes with a locking pin for the hitch too. Thx. Nissan Rogue 2016. Thx

asked by: Jules

0

Expert Reply:

I would be happy to help!

I took a look at the Hitchrider Truckee Trike rack you mentioned but was unable to find any information regarding how much clearance from the center of the hitch pin hole to the outside edge of the rear bumper is required for the rack to work properly without interference issues.

The Curt Trailer Hitch Receiver # C13204 you were looking at for your 2016 Nissan Rogue measures 4-1/4" from the center of the hitch pin hole to the most outward part of the rear bumper, as you can see in the included diagram.

While the rack will fit inside of the receiver just fine, I recommend reaching out to Hitch Rider to verify how much clearance you need before making a purchase.

I included a video of the # C13204 being installed on a 2016 Nissan Rogue for you to take a look at.

expert reply by: Samuel C

0

Hitch Pin Hole To Bumper Clearance of # C13204 On 2016 Nissan Rogue
(click to enlarge)

Answer 1

Installing a trailer hitch receiver on the 2020 Nissan Rogue such as as the Class III Draw-Tite Max-Frame Trailer Hitch Receiver part #75902 or the Class III Curt Trailer Hitch Receiver part #C13204 will not affect all of the sensors for the rear…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Determining If Hitch Rider Truckee Trike Rack Fits 2016 Nissan Rogue W/ Curt Trailer Hitch C13204

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching