Will Curt Class III Trailer Hitch C13204 Fit a Nissan Rogue With a Decorative Splash Panel
Question:
There is a colored splash/decorative panel mounted low in the rear. Does the hitch interfere with this panel? Or does it mount below this? We have an SL model. I do not want to cut into this panel.
asked by: jim
Expert Reply:
Some models of the Nissan Rogue have underbody panels that will need to be removed to install the Curt Class III Trailer Hitch, # C13204. The underbody panels will not be reinstalled. The panels must be removed to expose the attachment points for the hitch at the frame rails. These panels are not visible unless you are under the vehicle.
I have attached a link to the installation instructions and an installation video that shows our technician removing the underbody panels for you to check out.
If you are talking about the lower part of the rear bumper fascia (see photo), then no, that panel is not touched during the installation. The receiver portion of the hitch will sit just below the lowest part of the stock rear bumper fascia.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Video: Curt Trailer Hitch Installation - 2020 Nissan Rogue
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: conical toothed washer
- Search Results: conical tooth washer
- Search Results: receiver collar
- Search Results: hitch cover
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Class III Trailer Hitch Installation - 2019 Ford Edge
- Video: etrailer.com Trailer Hitch Installation - 2017 Nissan Rogue
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Ford Edge
- Q&A: Is Fascia Trimming or Drilling on 2023 Nissan Rogue Needed to Install Curt or etrailer Trailer Hitch
- Q&A: Best Trailer Hitch for 2018 Nissan Rogue to Carry 4-Bike Rack
- Q&A: Comparison Between Curt C78KR and Draw-Tite 75234 Class III Hitches for 2020 Ford Edge
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Difference Between Curt Hitches C78KR and 13234 that Fit 2018 Ford Edge
- Q&A: Where Is The Hitch Item Number Located On A Trailer Hitch
- Q&A: What Vehicles does the Curt Hitch # C13204 Fit?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Rust Prevention
- Article: My Trailer Hitch Doesn't Fit
- Search Results: washer
- Search Results: conical washer
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2020 Nissan Rogue