To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.6 out of 5 stars (57 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.I installed this trailer hitch on my girlfriend's 2006 Scion xB. It was a perfect match, incredibly easy to install. Jack up rear of vehicle and support with Jack stands, remove the tow hooks, get the passenger side of the hitch above the exhaust and install 4 bolts/washers and torque them. The wiring harness I bought from etrailer was even easier (2006 Scion xB T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector). Two plugs and a ground wire. It'sa breeze towing a riding mower, bikes or kayaks with my little trailer. The prices were great and FREE SHIPPING. More people should be towing with small cars!
The customer service at etrailer has been the best experience ever. I originally ordered the Drawtite invisihitch but quickly realized it wouldn't work for my application. I needed to be able to utilize different drop bars to achieve the desired height of the ball, and the invisihitch just didn't allow for that. So I returned it and bought the Curt hitch. The Curt hitch completely suits my needs. The installation was fairly easy. I didn't drop the exhaust but was able to wiggle the hitch between my aftermarket exhaust and the rear lip. The holes did not match up on the drivers side but it was nothing a few good whacks didn't fix. All in all, great product. Hauls well. Excuse the pic. It's wen I had just picked up the camper and realized I needed a different height drop bar.
Susan H.
4/8/2017
After a year its still working great and seen thousands of miles.
I've ordered from etrailer several times and have never had an issue. I've never had to return an item and shipping is always super fast. etrailer is one of my favorite online companies.
only 'hitch' (groan) is one of the 14mm bolts on my scion 05 snapped upon removal. fits perfect - and you do not have to lower the exhaust
I was able to snake it in without lowering exhaust by angling driver side of hitch towards front of vehicle and pulling down on muffler saved some time. Holes didn’t quite lineup used a ratchet strap around passenger side rear tire to pull it to lineup.It took less than a hour with the help of ramps and a Milwaukee 18 volt impact driver and socket adapter. Really like the hitch!!! Going to use it to tow small light trailer.
Quick good service and it would have been an easy installation except the xB bolts were frozen beyond my capabilities. My next order ( soon ) will be a hitch for my new-to-me Camry.
Easy installation and works great on my 2005 scion xb
Ordering was easy and fast. My hitch and custom wiring kit were at my house in a few days. I've already watched a YouTube video showing how easy the install is and encouraged a friend to get one for her vehicle too.
Was Mount on my Scion with no problem
Fit perfectly, and works just as advertised.
Great customer service to help with my purchase when the original product I'd ordered was not available.
Ordered the next best option, and I'm very happy with the results.
etrailer has always been an excellent source for my towing needs.
Only complaint is the draw bar didn't come with a pin, but sourced one locally with no problem.
David G.
5/26/2020
Been a year of regular weekly use with this hitch. Very pleased with the performance of this hitch.
I had some problems with the fit of the hitch, and had to really pry on the assembly to get it to line up correctly with the holes. It took me Close to 2 hours to get it on. It just didn’t line up, not sure if something happened in shipping or not....I was not satisfied at all with the time and energy spent installing this item.
The wiring harness in the other hand was excellent, and very quick, works great!
Mike L.
8/10/2018
The mounting flanges on a trailer hitch are designed for straight line strength, not lateral strength. The flanges are actually designed to have some give in them, so that they can flex along with the vehicle. This way, if they get flexed during shipping, they can be easily manipulated back into place. As long as the powder coat didnt crack and there arent any cracks in the mounting flange itself, the hitch will work just fine after being moved back into place. Ill link you to a help article that shows a few different methods of manipulating the hitch back into place.
I've had this installed for a year. I've pulled a teardrop trailer about 1500 miles with it so far. It's great. I previously owned the hidden hitch, but I was tired of having to get down on the ground every time I hooked something up. The only downside of this is that it is the lowest point on the car - always. And being in the middle, I sometimes have problems dragging on dirt driveways that have deep tracks. But that's a result of the car height, not this hitch. The hitch has been great.
I knocked it down one star because it didn't quite align with all of the holes during installation. I had to install one side and pull on it a bit to get the other bolts in.
Good product, ok to install even with one person - you may need to use your leg to keep the far end of the hitch level while you work it around the muffler. The toughest part was removing the xB muffler, and it turns out you really don't need to.
I have a 1st gen xB with factory wheels/tires, and the hitch does scrape on some inclines if you go too fast or if there is a dip - if that bothers you, go for the hidden hitch varieties instead. But this one works great and doesn't require special adapters for bike racks or drawbars.
Easy to install no issues and really fast shipping
I've purchased three hitches for three different cars from etrailer.com. The prices are good, the shipping fast, and I hear the customer service is great, not that I've needed it. Oh, the install videos are super helpful too.
The etrailer site helped me choose the correct hitch for my car. Price was right, shipping was fast, great customer service. What more could you ask for?
This hitch is just OK. The receiver was not centered, but only about .5" off, so still usable. The big problem came when I realized that the slotted bolt holes were also .5" off (along the length, as measured from side to side). This was only a pain in the butt because I had to snake this thing back through the exhaust, mount it up on one of my milling machines, and augment the holes on each side. Hopefully Curt will dial this thing in. All in all, it was cheaper than what I could make one for (time and materials), so there ya go.
I had reservations from previous reviews. However, starting with the price and followed by the quality and the delivery this tow hitch exceeded my expectations. The fit was perfect and the installation not difficult at all. I strongly recommend etrailer. I will purchase from etrailer again without hesitation...keep up the good work...
Fits my 05 xB well. Came in with one bracket bent but easy to straighten with a rubber hammer. Had to squeeze the bar over the muffler tip which can be done but you need to undo both of the bumper cover brackets. Other than that went on easy and fits well.
The hitch bolted right on. The hitch comes with better bolts than the stock ones. No problems with bolt hole spacing like others have posted. I did have to remove the rubber mount that holds the muffler up, as i could not fish the hitch over the muffler. A little oil on the rubber mount/post and it slid off nicely.
Curtis 1-1/4" trailer hitchThe trailer hitch was just what I needed for my '05 Scion xB. Thanks for the help on the website, I got my order right the first time. The shippment was extremely quick. I already have it mounted on my vehicle after just a few short days! I will definately be back when I need more items.
product sems solid. More difficult to install than indicated and instructions were not detailed enough. I was fortunate to have accumulated all the tools I needed, but I am guessing that many would not have a 1/2" ratchet extender that was needed for the install. Also, I did not need to lower the muffler as was indicated.
Fit perfectly. I didn’t have to lower the exhaust. Instead, I pulled part of the lower plastic panel off by popping out the plastic clips. Then snaked the hitch around the exhaust. Very happy with the hitch.
A+++++++++
No drilling or fishing bolts through tubes. Fits perfectly. The most difficult part for me was lowering the exhaust. But etrailer has a youtube video that showed me how. That part wasn't easy, but everything else was a snap.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Neil
1/24/2018
They are working great. Thanks.