bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11418
Our Price: $192.04
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11418 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (31)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11418

  • 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11418 Curt Class 1 Trailer Hitch Receiver

Installation Details C11418 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11418

Average Customer Rating:  4.8 out of 5 stars   (31 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2016 Mazda CX-3

Great fit and fairly easy to install. A couple of things to note: there some plastic components up under the back bumper that need to be removed (2016 Mazda CX-3 4 door sport) or the hitch will not go into place. The hitch uses the existing 4 lower bumper bolts to attach it. Recommend that bolts on the passenger side get lined up into the hitch first - this made it a lot easier to install. Once installed - you'll have about 9-1/2 inches of ground clearance from the bottom of the Receiver.

Gary

8/15/2023

works great for holding carrying my 2 bike, bike rack.



by:

It works great good product



by:

Super fast packing and shipping. Thank you!



by:

This was a very positive experience & a great deal. I ordered the trailer hitch knowing from the website that it would fit my make and model of car. A friend easily installed it for me and we've been happily using it to securely hold our bikes and rack for the past year.



by:

Because of my vehicles exhaust system there aren’t many hitch options and the car manufacturer doesn’t offer a hitch.
Compared to other hitch brand, etrailer provides several design options to choose from. I decided on the low profile, almost hidden design.
Shipping was fast and installation was an absolute breeze. No special tools, no drilling or cutting. The online video associated with this specific hitch and specific to my vehicle was all I needed to quickly and confidently complete the install.



by:

Just right for my vehicle to carry my bike rack.



by:

Awesome little product. I fit my Yakima holdup rack and it seems to hold everything with no problem. Very little movement in the attachments.

Very low profile as well. Easy install. Would definitely recommend.



by:
2018 Mazda CX-3

Fit my vehicle perfectly. Video instructions were spot on. Easy to install.
I did add some steel strapping that I got at the hardware store to replace the body support. Used some plastic to keep it from rubbing against the hitch. Glued it in place. Finished with a bit of paint to prevent corrosion. Plan is to mount the bicycle rack to the hitch. I did purchase the support strap, not pictured.



by:
Mazda

Received hitch for 2019 Mazda CX-3 and upon inspection found that the receiver was welded on crooked/twisted. It’s apparent that Curt hitches has little or no quality checks or fixturing in place to control their process. Tried to add photos of issue but would not upload to this site.

Etrailer Expert

Jenny N.

1/16/2023

A crooked hitch would be a problem and it is not typical to hear with Curt branded hitches. I will have our Customer Service team reach out to you.



by:

Worlds great thanks. Am sorry u can barely see the hitch because I put my rack already.



by:
2016 Mazda CX-3

Easy install on 2016 Mazda CX-3
Looks
great, all you see is the actual receiver hitch
Use for Kuat bike rack

Tom M.

8/12/2017

Update: I had to replace the Curt receiver as it flexed and bent causing the bike rack to begin ping down. Curt recommends a supporting strap that just isnt practical on my car due to spoiler. I ordered the DrawTite hitch which is a much beefier design and I am not experiencing the same issues. I would highly recommend the DrawTite hitch over the Curt. To be fair, Ive had Curt products before and they performed well. Just in this case I feel the DrawTite is a superior product.



by:

The product was easy to install (five bolts)and when I submitted a question about the plastic bumper offsets, they responded the same day saying they they did not need to be reinstalled.



by:

Thanks for the follow up. I did receive the package. The installation went
fairly well. The on-line installation videos are excellent. For the CX3
Mazda 2017 I don't think the washer provided is the correct thickness. Even
after the correct torque (95 foot pounds) the washer is a little loose, I
think because the tow hook for the 2017 may be a little different than the
2016. Anyway that's not a big deal. I'll just add a metal shim.
Thanks again. Looking forward to purchase a bike hitch rack from etrailer.



by:

Hitch works great. Had it installed by our local mechanic for $50 so in total, compared to U-Haul, we saved over $100!

Hugh

6/13/2022

Still doing well.



by:
2017 Mazda CX-3

Awesome perfect fit!!



by:

Great product!



by:
2016 Mazda CX-3

This is the second trailer hitch I have purchased from etrailer. I like that your product is of the highest quality and name product. Thank you for the quick and ease of ordering for the correct model of cars. Delivery was quick also.



by:
Mazda

Perfect fit for Mazda CX3 sport. Will be using it for a bike rack. Associated video was super helpful. Do not hesitate to buy this for your Mazda CX3. If you follow the instructions in the video, installation is simple. My hitch was shipped within hours of placing my order.



by:
2016 Mazda CX-3

It went on with no issues. All of the additional information provided here was a help in putting on the hitch. The only issue that needs to be solved is the electrical connection.



by:
2016 Mazda CX-3

I'm am happy with the product, good design and no need to remove the bumper brakets as sone sone instructions suggest just lower your muffler and your there. About a half hour install.
Nice job etrailor.



by:

Well made, received promptly. Piece was an exact fit and easy to install. Thanks etrailer, you are the best for towing products.



by:

Super helpful and reliable customer service. I will definitely order from etrailer from now on. Thank you!



by:

Timely delivery. Video instructions were great. Installed within an hour and a half.



by:

Easy to install. Nice hitch



by:

Incredible customer service!


25
31
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • What Supports Bumper Fascia After Curt Trailer Hitch is Installed on a 2016 Mazda CX-3
    With Curt hitch # C11418 installed on a 2016 Mazda CX-3 the lower fascia is still attached elsewhere on the vehicle and it will also be resting on top of the hitch receiver. There isn't room to replace the brackets that were removed to install the hitch. It does not appear to be an issue with Draw-Tite hitch # 24933 and I have linked that video for you as well. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory...
    view full answer...
  • Troubleshooting Bike Rack Weight Bending Class I Curt Hitch Down
    Were you using the required stabilizer strap part # 18050 when carrying your Kuat NV part # NV12G with the Curt hitch part # C11418? Curt requires you use this strap to basically help prevent the weight from damaging the hitch and vehicle like you were experiencing. Also, were you driving on any rough roads? You should note that none of the hitches or racks we offer will be able to withstand any off-roading. At this point though your frame is damaged to the point I would not recommend installing...
    view full answer...
    Image 1 for
  • Hitch and Wiring Recommendation for Towing a Trailer with a 2019 Mazda CX3
    The best hitch option for your 2019 Mazda CX3 is Curt hitch part # C11418. Both the Draw-Tite and Curt option for the Mazda are Class I options and can handle up to 200 lbs of tongue weight. I recommend the Curt hitch because installation takes less time compared to the Draw-Tite option. The Curt hitch hardware is easier to access when it is time to torque down the bolts during installation. I have attached an installation video of the Curt hitch on a 2017 Mazda CX-3. The Curt option...
    view full answer...
    Image 1 for
  • Best Trailer Hitch Receiver For 2021 Mazda CX-30
    The Curt, # C11418 is confirmed to fit your 2021-21 CX-3 as well as the Draw-Tite Sportframe, # 24933. Each of these hitches are a 1-1/4" x 1-1/4" Class I hitch with a 200 lb. tongue weight rating and a 2,000 lb. trailer weight rating. Both are capable of light duty towing and a good choice for a bike rack or cargo carrier. With most all things being equal in ratings and performance I suggest the Curt, # C11418 option due to customer feedback having a better finish. If the powder coating...
    view full answer...
    Image 1 for
  • Picture of Trailer Hitch Installed on a 2016 Mazda CX-3
    I attached a picture that shows the Curt Hitch part # C11418 installed on a 2016 Mazda CX-3 like what you have. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
    view full answer...
    Image 1 for
  • Which Trailer Wiring Harness for 2019 Mazda CX-3
    Although both the Curt # C56300 and the Tekonsha # 118718 are both fits for your vehicle, I'd personally choose the Tekonsha harness, as we've found that they tend to be a bit more reliable over time. If you haven't yet decided on a hitch, I'd recommend the US made Curt # C11418. For a ball mount, Curt recommends the # C45521. For a trailer ball, use # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch. I've linked to install instructions and an install video for the hitch.
    view full answer...
  • Can a Custom Hitch for a 2018 Mazda CX-3 be Used on a 2018 CX-5
    Neither the Curt, part # C11418, nor the Draw-Tite, part # 24933, that are made for the 2018 Mazda CX-3 are compatible with the 2018 Mazda CX-5. The mounting areas are different on the frames, so they are not interchangeable. If you are looking for a hitch for your CX-5, then I recommend the Curt Class III, part # C13315. It has a towing capacity of 4000 pounds and a maximum tongue weight of 600 pounds. It has a 2" receiver, but you can use your older 1-1/4" accessories using an adapter...
    view full answer...
  • Trailer Hitch for a 2018 Mazda CX-3
    Curt trailer hitch # C11418 is a fit for the 2018 Mazda CX-3. I have linked a video showing an example installation on a 2016 and the process will be basically the same on your 2018. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050...
    view full answer...
  • Difference Between Hitches Available for 2019 Mazda CX-3
    Although both the Draw-Tite # 24933 and the Curt # C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with the only visible portion of the hitch being the receiver tube and safety chain loops. Both share share the same 2000 lbs towing/200 lbs tongue weight capacity and have the same level of installation difficulty. I personally prefer the Curt, as it's...
    view full answer...
    Image 1 for
  • Comparison of Curt or Draw-Tite Trailer Hitch Receiver for Carrying Bikes on a 2016 Mazda CX-3
    Both the Curt # C11418 and Draw-Tite # 24933 trailer hitch receivers install into the same location as each other on your 2016 Mazda CX-3. However, the Draw-Tite does not require the use of the support strap # 18050 like the Curt does. Both racks are Class I, 1-1/4 inch hitch receivers so I doubt you will have a much different ride using the Draw-Tite instead of the Curt. Have you tried an anti-rattle device on the bike rack? If you can tell me the make and model of the bike rack we...
    view full answer...
  • Trailer Hitch that Fits 2019 Mazda CX-3 Hatchback
    Yes the Curt hitch part # C11418 that you referenced is a fit for a 2019 Mazda CX-3 hatchback like have as it fits all models. We had the chance to install it on a 2019 hatch as well which you can see in the attached install video.
    view full answer...
  • Recommended Hitch Confirmed to Fit a 2021 Mazda CX-3
    The Curt Trailer Hitch Receiver # C11418 is confirmed to fit all models of the 2021 Mazda CX-3. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a Class 1, 1-1/4" hitch receiver for using hitch mounted accessories such as bike racks, cargo carriers and ball mounts. When using hitch mounted accessories with this hitch you will want to make sure it is rated for use with a Class 1, 1-1/4" hitch. Something like the Thule Apex XT 2 Bike Rack # TH9024XT...
    view full answer...
  • Best Looking Trailer Hitch for 2018 Mazda CX-3
    Between the two hitches that fit your 2018 Mazda CX-3 the Curt, part # C11418, is tucked under the rear bumper by about an inch more than the Draw-Tite, part # 24933. Although I feel like the Curt is still more obvious to the eye because it has the thick outer collar around the receiver opening. I've attached pictures of them both installed so you can see the difference. Additionally, a hitch that sits closer to the bumper's edge is generally considered better for bike racks so the rack...
    view full answer...
    Image 1 for
  • Does Curt Hitch 11418 Fit 2016 Mazda CX-3
    The Curt hitch part # C11418 fits a 2016 Mazda CX-3 but we do not have any hitches for a 2015 model as 2016 was the first production year for this vehicle in the US.
    view full answer...
  • Replacement Hardware for Curt Trailer Hitch on 2018 Mazda CX-3
    You can definitely get replacement hardware for the Curt Trailer Hitch Receiver # C11418 that fits your 2018 Mazda CX-3; what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is click # RHK, enter "C11418" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, hit "Add to Cart" and you're set!
    view full answer...
  • How to Carry Thule Tepui Rooftop Tent with 2017 Mazda CX-3
    Thank you for reaching out! For your application we need to look at an alternative to a roof rack on your 2017 Mazda CX-3 because the Thule Tepui Explorer Ayer 2 Rooftop Tent, like the part 901201 in blue, is not supposed to be installed on a roof rack that uses clamps to install on the vehicle. This is because the weight of the tent could damage your roof. Any rooftop tent that I've looked at the instructions for have this same instruction - they are only supposed to be installed on roof...
    view full answer...
  • Trailer Hitch for 2019 Mazda CX-3
    We do have trailer hitches to fit your 2019 Mazda CX-3 that are similar to the part # 90092 that you referenced. The available hitches for the 2019 CX-3 are the 1-1/4-inch size like # 90092 but they are lighter-duty Class I hitches. There are not any Class II hitches for your car. The available Class I hitches are Draw-Tite # 24933 and Curt # C11418. Between these two I recommend the USA-made Curt # C11418 because it will be easier to install. A video and the instructions both are linked...
    view full answer...
  • Does Curt Still Require Stabilizer Strap When Carrying Hitch Mounted Accessories
    Actually Curt stopped requiring the stabilizer straps with bike racks and other non-supported hitch accessories with their hitches like the # C11418 that fits your 2019 Mazda CX-3. It was an extra precaution they took back in the day but recently found it's not needed.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.