How to Carry Thule Tepui Rooftop Tent with 2017 Mazda CX-3

Question

Question:

Hello, I’m trying to find cross bars for my 2017 Mazda CX3 that’s compatible with my new Thule Tepui Explorer Ayer 2 - 2 Person Rooftop Tent. I was told Thule doesn’t sell crossbars that make the two compatible so looking at other crossbars that help me mount the tent to my car. Thank you

asked by: Diana

0

Expert Reply:

Thank you for reaching out! For your application we need to look at an alternative to a roof rack on your 2017 Mazda CX-3 because the Thule Tepui Explorer Ayer 2 Rooftop Tent, like the part 901201 in blue, is not supposed to be installed on a roof rack that uses clamps to install on the vehicle. This is because the weight of the tent could damage your roof. Any rooftop tent that I've looked at the instructions for have this same instruction - they are only supposed to be installed on roof that's that connect to a raised rail or fixed point system.

A better way to transport the tent with your vehicle would be with a towable trailer but it is worth noting that the online manual for your 2017 CX-3 says not to tow a trailer with your vehicle so if you choose to do this it will need to be done with careful consideration...otherwise you'll need to use a different vehicle.

If you do choose to tow a trailer to carry the tent on then I recommend installing the Curt Trailer Hitch # C11418, the Curt Wiring # C56300, Ball Mount # C45028, Pin & Clip # F-4, and 2" Hitch Ball # C40018. For a trailer you can use the Malone EcoLight Sport Trailer # MAL53FR.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Answer 1

As long as there isn't anything connected to the trailer wiring kit part #C56300 it will not draw anything from the battery and drain it.

view full answer...

Answer 2

For mounting the Thule Tepui Tent #TH37HJ on your 2020 Subaru Outback Wagon with factory installed raised rails you can use the Malone AirFlow2 Roof Rack #MPG216.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...