Replacement Hardware for Curt Trailer Hitch on 2018 Mazda CX-3

Question

Question:

Hi, I would like to know if its possible to have a replacement hardware kit bolt spacer and nut for the trailer hitch Curt model C11418 for mazda cx-3 2018.Thank you !

asked by: Daniel

0

Expert Reply:

You can definitely get replacement hardware for the Curt Trailer Hitch Receiver # C11418 that fits your 2018 Mazda CX-3; what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK.

All you need to do is click # RHK, enter "C11418" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, hit "Add to Cart" and you're set!

expert reply by: Kyle S

0

Answer 1

In order to select the correct amount of rise or drop you would need you will need to take a couple measurements. The goal is to have your trailer sit as level as possible. The first thing you will need to do is park your tow vehicle on level ground…

view full answer...

Answer 2

The Curt Class II Drawbar part #C45000 is indeed compatible with the 1-7/8" Hitch Ball part #C40001 and the Curt Hitch Pin and Clip part #C21403. The Curt Class II Drawbar measures 13-1/2" from the center of the hitch pin hole to the center…

view full answer...

Answer 3

To install hitch ball #C40001 you will need a wrench wide enough to fit around the wrench flats on the ball, a torque wrench good for up to 160 foot pounds and a socket for the nut. You could also use a bench vise if you do not have a wrench large…

view full answer...

Answer 4

For hitch balls we recommend white grease like the part #58117 since the ball moves around in the coupler but for the hitch itself there isn't a grease recommended for that.

view full answer...

Answer 5

To apply grease to the top of a hitch ball with the part #58117 all you would need to do is apply a small amount to the top of the ball. The coupler will then push the grease around and spread it evenly on the ball.

view full answer...

Answer 6

Yes, the Tekonsha T-One 4-Pole Wiring Harness #118718 will work fine to power LED lights on a trailer or accessory carrier used with your 2019 Mazda CX-3 but it does require the 12V power wire connection in order to function. The plug-in connectors…

view full answer...

Answer 7

When looking at the weight capacities on ball mounts that feature a longer shank, such as the Curt Class I Drawbar #C45024 that you recently purchased, you can comfortably follow its listed weight rating without having to reduce the capacity based on…

view full answer...

Answer 8

The only hitch we offer for your 2007 Altima is a Class I hitch, which has a 2000 lb towing/ 200 lb tongue weight (the maximum amount of weight that can be suspended from the hitch) capacity. Using an adapter would lower the tongue weight capacity by…

view full answer...

Answer 9

The Curt hitch part #C11418 fits a 2016 Mazda CX-3 but we do not have any hitches for a 2015 model as 2016 was the first production year for this vehicle in the US.

view full answer...

Answer 10

Although both the Draw-Tite #24933 and the Curt #C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with the…

view full answer...

Answer 11

Yes the Curt hitch part #C11418 that you referenced is a fit for a 2019 Mazda CX-3 hatchback like have as it fits all models. We had the chance to install it on a 2019 hatch as well which you can see in the attached install video.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Hardware for Curt Trailer Hitch on 2018 Mazda CX-3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching