bing tracking image
  1. Trailer Hitch
  2. Buick
  3. Enclave
  4. 2010
  5. Draw-Tite
FITS 2010 Buick Enclave
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75528
Our Price: $183.15
Trailer Hitch
Confirmed to Fit
2010 Buick Enclave

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Buick trailer hitch experts, and offer a great price. etrailer.com carries a complete line of Draw-Tite products for your Buick Enclave 2010. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part 75528 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (1717)
  • Q & A (0)
  • Photos
  • Used (1)

2010 Buick Enclave - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 5000
  • Concealed Cross Tube
  • 750
  • Draw-Tite
  • 7500 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

Fully welded Buick Enclave trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 7,500 lbs
    • Maximum tongue weight: 750 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Spacer block dimensions: 2" long x 1" wide x 1/4" thick
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75528 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87435 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75528 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
750 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.

Tongue Weight (TW):
750 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Fascia door panel must be removed for hitch installation and may not be able to be reattached. No drilling required for installation , Do not cut or splice vehicle wiring. Only use approved T-One or see auto dealer for trailer tow wiring kit




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75528

Average Customer Rating:  4.9 out of 5 stars   (1717 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2011 GMC Acadia

I blindly ordered a Draw Tite receiver for my 2011 Acadia - based upon reputation. Had it installed and it cost me $100 do have it put on. Recently weather allowed me to proceed to installing my long term (CURT) 2 inch Ball bar with 2 inch ball into the Draw Tite receiver for work needing to be done and found that it would not allow inserting unless use of sledgehammer.

I attempted to file down the misaligned (welded on) collar that was forcing the misalignment and was not able to make to make it work.

Nichole at etrailer worked with me and replaced the Draw Tite receiver and I found the replacement was properly aligned and my Ball bar does now fit properly.

So - presently had over double the cost for the defective unit and replacemetn that I should have. Being 82 year old I can no longer perform the task of handling this work.



by:
2016 Chevrolet Traverse

Came 2 days early, didn't take my money till they ship it. Plus I never like to order anything online because I'm afraid it won't fit. But they said it would an it did( 2016 chevy traverse). Also it says 45 mins to install. Sounds About right 10 mins asking the wife an kids to help hold it up with no luck, 10 mins looking for my tools 18mm & 3/4 wrench,10 mins looking at the picture of the instructions because what GUY really reads it? lol, 10 mins putting it on by myself laying on my back in the driveway using my leg to hold it up & 5 mins putting on 1 bolt by the muffler because I didn't read the instructions an lower the muffler out of my way hahahah. P.s is you have soft hands I suggest wearing gloves an waiting for the muffler to cool off because i didn't ??. But all in all it was easy & fast to put on even if your by yourself. Definitely ordering again if I need anything for her car. Thanks etrailer



by:

Smooth process. Super fast shipping (1-day). I recently contacted etrailer to help me set up tax exempt as I am the commander of our local AMVETS post. I hope to do business again soon as we have many veterans in need of both hitches and cargo carriers for their mobility scooters.



by:

Went on great. I live in a state that uses road salt so I had to tap out the threads due to rust. Undid the exhaust hanger mid vehicle to get room to do that.
The fascia door/cover does not fit over the installed receiver, which was a bummer. Would have gave it five stars if it did. Pretty easy project. Getting the exhaust hangers off was tough and took the longest time of anything.



by:
2012 GMC Acadia

I received this Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" back in December and just installed it yesterday.
The hitch came with all mounting hardware including instructions. I went online to review the install video which I recommend to any DIY's it was very helpful. It took more than the 45 minutes that was quoted but that was because of the factory frame nuts were rusted and trying to tap them was difficult because the exhaust would only drop a few inches. All in all it was a fairly easy project for a 68 year old to accomplish.
I would recommend this product.

Michael

7/1/2020

Still working great



by:
2014 BuickEnclave

One of my key concerns was that several vendors apparently ship these trailer hitches unwrapped and without a box. I was pleased to find that the hitch was nicely packaged with the parts nicely secured.

I found the video very helpful, and I completed the installation in less than an hour. Using a ratchet strap to secure the mufflers made the job quite simple. I did have help holding up one side of the hitch while I started the bolts, but other than that it was largely a solo effort. My Enclave has only been through one winter, and the bolts threaded in after minimal cleaning the threads with a shot of WD40. The four rubber muffler hangers popped off without use of lubricant or a pry bar.

Oh, by the way I took advantage of the low price guarantee. Etrailer provided the price difference plus 10% before the item even shipped. I almost felt guilty about getting a credit when I found a lower price from a lesser vendor. Etrailer has been extremely responsive, and I couldn't be happier with the whole experience.

Dave

6/18/2016

I went back and refreshed my memory last years review, and I am still satisfied today. The hitch looks the same as when I installed it a year ago.It was a great value and buying experience, and if I am in the market for trailer accessories, I will be back.I think that the etrailer business model of including customer comments and informative installation videos would translate well to other parts markets.



by:
2017 BuickEnclave

The Max Frame Trailer Hitch receiver custom fit Class III was as advertised. All of the parts came at the same time and the installation was very easy. I would recommend watching the installation video as well as following the instructions. The nice advantage was the molded cover on our 2017 Buick Enclave fit directly over the receiver so it was perfect fit. I would recommend this type of hitch to anyone thinking of paying a high price to have one installed.

Dutch S.

3/21/2019

Working great no issues



by:
2011 Chevrolet Traverse

Ordering was easy and receiving my order was very quick . The receiver kit was complete and well packaged . I will install it in the next few days .



by:
2012 GMC Acadia

I received the hitch, ball mount and wiring for my 2012 Acadia within just a couple of days after placing the order. The entire order was well packed in very heavy cardboard and was still in good condition upon arrival. I finally got around to putting it on today and as some others have indicated taking loose the muffler hangers and reinstalling them is probably the worst part of the job. I used some of my wifes vegetable spray and that helped a great deal. I did need my wife to help hold up on the hitch as I got the bolts started so we made a family project out of it.

Harry E.

4/10/2014

Yes, we still like that the hitch has the capability of being hidden withthe optional cover that we purchased for our 2012 Acadia. We will be using it again shortly to trailer our golf cart up to the campgrounds.



by:

I bought this hitch after watching the installation video on the Etrailer website. It was easy to install! I installed this in my driveway and it took me about 45 minutes. Etrailer provides great installation videos and product information so you can make an informed decision. If you can work a ratchet and socket, you can install a hitch! Great information! Great product! Great company! Thanks!

Rich N.

12/15/2017

Everything is working great! Your array of products, variety of vendors and installation videos are outstanding!



by:

Excellent service. Hitch was overnighted, on time and installation was straight forward. I will recommend you guys. Thank you all



by:
2008 GMC Acadia

Perfect fit on GMC acadia 2008. Easy to install, thanks to the instructional videos. Distance from center of 5/8 pinhole to farthest part of bumber is around 5 inches. There is also a 1/2 hole. Arrived on time. Perfect fit with mounting bracket 18144. Wiring harness 118451 was also easy to install.

Will

8/12/2015

Neil, did your hitch cover go back on?



by:
2014 BuickEnclave

Install was easy on 2014 Buick enclave. Super happy with it.



by:

I was fortunate that this fit so well and was easy to install on my 2017 Traverse.



by:
2014 BuickEnclave

Installed on a 14' Buick Enclave. etrailer has fantastic instructions and support I knee what had to be done before hitch arrived. No surprises and was able to tow from TX to WI with no issues. Took about an hr to install by myself without lifting car. Also took pictures to document process.

I did have one minor issue when I arrived at the trailer rental place and running lights didn't work. A fuse blew after 1st trip with it. Replaced and haven't had issues since. Very minor and don't think reflects any negativity onto quality of product.

I also highly suggest purchasing plug clip mount with this hitch. If not the plug is dangling and it's not expensive to add the mount. Glad I did and it looks nice.



by:
2012 BuickEnclave

No problem putting on the Hitch our 2012 Enclave. My wife did not want the hitch to show. Done some research and found that GM has a fisacia insert that takes the place of the one you remove. GM part # 25775358. A little pricey but worth it.

Anonymous

12/17/2013

Just got a 2014 Enclave. Thinking to buy the same hitch. Based on the video, it seems the orig. rear fascia door can be re-installed back. Why did you not put back the orig. one? Its not possible or you dont like the orig. fascia style? Or, only 20132014 enclave fascia door can be reinstalled? Thanks.

Tom G.

12/17/2013

It is my understanding that the 2013

Patrick B.

12/19/2013

Tom, I think part of your response got cut off. The Enclave received a bit of a facelift for the 2013 model year and the changes to rear bumper cover allow for the original cover to be re-installed over a hitch on 2013 and newer. 2012 and older models require a different panel to accommodate a hitch.

Tom G.

12/20/2013

You are correct, or at least that was my understanding from Pecks Trailer Hlitch installation. I just know my fascia would not go back on, the hitch is very hard to see anyway Just my wifes car and she did not want the hitch to show.

Snowshovel

4/21/2014

Thanks all for the comments. Spring is coming. Ordered and got the hitch installed on my 2014 Enclave. the orig. fascia door can be re-installed wo any problem.Happy!



by:
2016 GMC Acadia

The online purchasing process could not be any easier through etrailer. I also received emails from etrailer when the product was shipped and they even sent me an email once they were informed that the product had been delivered to my house. Pretty impressive.

The packaging of the product was exactly what I would expect. Many reviews from others had mentioned suppliers that have shipped their product without any boxing material and the product showing up being damaged and parts missing. etrailer packages their products in a very durable packing box, the product is mobilized with additional packing material inside to prevent dings and damage, and all of the mounting hardware and instructions are sealed in a bag.

Assembly could not be easier. eTrailer has created a great You Tube video at https://www.youtube.com/watch?v=mEqrluxIw5o which made installation a breeze after watching this. I had my 4 yr old daughter help me with the installation (She held up one side of the hitch while I started the bolts on the other side), I dropped the muffler for easier access to the vehicle’s frame mounting holes on one side, and I used the handle nuts that were provide by etrailer to install the bolts through the predrilled holes in my Acadia which made the rear bolt install quite easy. The hitch fit perfectly without any interference and the 2016 Acadia's cover also fits back on my vehicle to hide everything while the hitch is not in use. I timed the entire installation process and it only took me 16 minutes and 10 seconds.

etrailer provided clearance measurements for the mounting of accessories which gave me confidence that my cargo carrier would fit. My cargo carrier fits into the hitch perfectly, there is ample clearance between my carrier and my vehicle, and there is enough clearance around the hitch to use a locking hitch pin.

You really cannot beat the quality of this product, the easy of ordering from etrailer, the efficient and professional shipping process that etrailer has created, and the ease of installation for this product.



by:

Installed it myself and it is working p erfect.



by:
Chevrolet Traverse

I put this hitch on in about 45 minutes single-handedly -- no, really, I am 7 weeks out from rotator cuff surgery and I found it easy to install using mostly my non-dominant arm. It's that easy! On the Traverse, it is truly a "hidden hitch" -- see pics. I used this hitch in conjunction with the Curt C56245 wiring harness and TrailerMate TM76470 mounting bracket. Each of those products work perfectly with this hitch. I would not change anything, this is a perfect setup.



by:
2012 GMC Acadia

I received the hitch in the mail a few days ago, and I must first say that the packaging was very good. The hitch was well protected and boxed up nicely, with no loose parts anywhere.

The instructions were fairly easy to follow and installation took about 1 hour. It could have taken less time if I had a lower profile torque wrench. The distance between the top of the muffler and the bolt was less than 2" and the height of my torque wrench and socket were more than that. So, in my case, it took me hanging on the muffler to make enough room to get the wrench in between to tighten the bolts to specification. As I said before, I didn't have the proper tool so I used what I had.

For the 2012 GMC Acadia, the installation used 6 bolts, 6 cone washers, 2 spacers, and 2 handle nuts. The plastic bumper cover and the rubber muffler vibration mounts are the only things that need to be removed for the installation.

Overall, it seems like a well-built trailer hitch. I look forward to many years of use!



by:
2009 GMC Acadia

I was happy to see such a great price. I am very happy with this hitch. I can tell it is strongly made and has a great weight to it. Before I post pictures of the final result, I will say before I could i install, I inspected the factory holes and since its a 2009 Acadia and was not weather proofed from day one, there were all rusted and half the threads were gone. So I had to go to Harbor Freight and buy a tap set and make the rusted out threads new again. If you have to do this, be patient and be sure you go in straight from the start. Then as you go and give it a few turns, back it out and clean off the gunk metal shavings and be sure to put some sort of oil on it to prevent getting seized and lubed for cutting new threads. Once I did that, the bolts went right in. Far as installation steps, the video on the website was very helpful. Dont worry about the ones that come in the box. One pointer, use jack stands to support the muffler when you remove it out of the hangers. After all was done, I zipped tie all the wiring on the up side of the hitch and out of site. It all looks great!



by:
2009 Chevrolet Traverse

i bought the hitch package, hitch, harness and ball mount. the
materials are first rate and well made. installing the hitch took less
than 30 minutes. instructions said to drop the muffler on the
passenger side rear for access to the holes, but on the 2009
traverse i had room without dropping the muffler. the wire harness
took a couple hours thru no fault of the product. i had trouble getting
one of the taillight assemblies out. very happy and recommend the
product to anyone. thanks much!!!!!!



by:

Bolts right on perfect fit. I had to clean up weld bolts on the vehicle.



by:
2009 BuickEnclave

Ordered the hitch from etrailer Tuesday night, the day we picked up our 2009 Enclave, and it was dellivered on Friday(!), but I had to wait for a warm day to do the install. After the hitch was delivered, etailer sent me link to a review and resource page, with an installation video of the Englave. Watched the installation video, then watched it again to make sure I picked up on every detail. Installation went as smoothly as predicted, despite working on my back, with the rear end (of the Enclave) up on ramps. Took me about an hour, but then I hadn't installed a Hidden Hitch since our 1995 Olds 88.
Product and service from etailer are great!



by:
2013 BuickEnclave

The Drawtite 75528 Hitch works great. Had to drop both rear mufflers to get the bolts in and torqued. Bent the plug-in bracket and mounted it upside down. Also mounted plug upside down. This allowed me to re-install the bumper cover hitch door.


25
1728
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Wiring Harness For 2016 GMC Acadia Without Factory Tow Package
    We do indeed have a trailer wiring harness that will fit and work with your 2016 GMC Acadia without the factory tow package. The harness is labeled as being "for factory tow package" but is not exclusive to that; it comes with the fuses and relays needed to activate the harness. The correct part is the following: - T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118270 You will first insert the fuses and relays included with the # 118270 in the locations...
    view full answer...
  • 2016 Buick Enclave Draw Tite Hitch Fit Confirmation
    For your 2016 Buick Enclave the Draw Tite hitch part # 75528 has been confirmed as a fit. Since trailer hitch hardware is considered one time use you would need to replace all of the hardware. We offer replacement hardware. For that you would want the part # RHK. On the product page you would need enter the part number of the hitch and select the manufacturer from the drop down menu. The hardware kit will come with new handle nuts as well. If you need trailer wiring you would want the...
    view full answer...
  • Troubleshooting Installation of Draw-Tite Max-Frame Trailer Hitch Receiver on a 2014 GMC Acadia
    I've attached a video of the Draw-Tite Max-Frame # 75528 being installed onto a 2014 GMC Acadia. I've also included a couple of other videos that may be the reason you're having a having problem. Some vehicles require the use of handle nuts because there are no weld nuts and also sometimes the existing weld nuts need to be cleaned extremely well in order to fit.
    view full answer...
  • Mounting Bracket Needed to Mount 4-Way Flat Connector on Hitch for 2017 GMC Acadia Limited
    To mount the plug from a 4-Pin Flat wiring kit, like part # C56245, on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 for your 2017 GMC Acadia Limited you will just need the Mounting Bracket part # 18144. This comes with the mounting hardware.
    view full answer...
  • Trailer Hitch Fit for 2016 Buick Enclave that Allows Rear Fascia to be Reinstalled
    We have found that the Draw Tite hitch part # 75528 which is a confirmed fit for your 2016 Buick Enclave will allow the rear fascia to be installed after the hitch is installed. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Trailer Hitch and Wiring Recommendation for a 2015 Chevy Traverse without Tow Package and Rear AC
    Your 2015 Chevy Traverse does have the rear air conditioner so for trailer wiring you would need the part # 118270 as it has been confirmed to work with the rear AC on Traverse models without the tow package. For a hitch the part # 75528 would be a great choice as well. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop...
    view full answer...
  • Trailer Hitch and Transmission Cooler for a 2010 Buick Enclave
    You will want to be extra careful because just adding a transmission cooler and higher capacity trailer hitch will likely not get your Buick Enclave to the 4500 pound capacity. That much discrepancy in the tow package capacities suggests to me a difference in the drivetrain (motor, transmission) and/or the suspension as well as the rear axle. I can certainly help you out with adding a cooler and higher capacity hitch but you will want to check with a Buick dealer or GM technician to determine...
    view full answer...
  • Can Fascia Cover of 2015 Buick Enclave Be Reinstalled After Draw-Tite Class III Hitch is Installed
    On Enclave model years after 2012, the fascia door can be reinstalled after the hitch is in place, and removed when the hitch is needed. On older models, you'll need to get a different fascia cover that sticks out a bit further from the dealer's parts department. For your 2015 Enclave, the fascia door will still fit after the hitch is installed, as you can see in the video I've linked for you.
    view full answer...
  • Recommended Trailer Hitch for 2015 GMC Acadia That Allows Fascia to be Reinstalled
    I spoke with my contacts at Curt and Draw-Tite and they said if your Acadia has a beveled fascia door you should be able to reattach the fascia door, but if your fascia door is flat you more than likely cannot reattach it. GMC made vehicles with both kinds of fascia doors. (See the image I included of a fascia with a beveled door.) The tongue weight rating for a hitch refers to how much vertical weight the hitch can handle right at the hitch opening. This is different from the total trailer...
    view full answer...
    Image 1 for
  • Is Loc Tite Needed when Installing Draw Tite Trailer Hitches
    If you torque all of the install hardware for the Draw Tite part # 75528 properly you would not need to use any Loc-Tite. The bolts stretch as they are torqued which acts as a "lock nut" and prevents from wanting to back out.
    view full answer...
  • Hitch, Ball Mount and Wiring Harness Options for 2012 Buick Enclave Without Factory Tow Package
    For your 2012 Buick Enclave the Draw-Tite 2-inch Class III hitch # 75528 is a confirmed fit. Install instructions and a complete install video are linked for you. The hitch comes with all needed hardware. You will also need a ball mount, hitch ball and pin/clip. I suggest ball mount # 989892. In terms of the wiring harness options you ask a very good question. The available products, non-powered models # 118450 and # C56027 and the powered converter model # HM11141615, differ in one important...
    view full answer...
  • Selecting Ball Mount for 2-Inch Class III Hitch on 2009 GMC Acadia
    If your choice of ball mount rise or drop means being a little high on the Acadia side this is usually preferable to the trailer being higher. With any trailer and vehicle there will always be a bit of vehicle rear-end squat from the trailer's tongue weight (TW). This means that if the hitch ball is a bit taller than the level trailer's coupler this is okay since this greater height on the vehicle side will offset the squat. Please refer to the linked article on ball mounts for more information...
    view full answer...
  • Trailer Hitch for a 2019 GMC Canyon that Retains the Holding Bracket for the Spare Tire
    It sounds like you're looking for a hitch for your 2019 GMC Canyon that can still support the spare tire. If you meant something else, just let me know. For the hitch, I recommend the etrailer hitch, part # e98909. This Class III hitch has a 2" receiver with a gross trailer weight capacity of 8000 pounds and a gross tongue weight of 800 pounds. I've linked to a video installation of this hitch on a 2020 Chevrolet Colorado. The installation is the same for a 2019 Canyon. You'll see in...
    view full answer...
  • What Malone AirFlow2 Roof Rack Do You Recommend for Transporting 2 Kayaks and a Paddle Board?
    I have a great solution for you. As far as the length of the Malone AirFlow2 roof rack, both the 50-inch version # MPG215 and the 58-inch version # MPG216 are recommended fits for you vehicle. With that being said, I recommend the 58-inch # MPG216 because you will ultimately have more room to mount accessories on your 2014 GMC Acadia. Unfortunately, if you plan on transporting 2 kayaks and a paddle board at the same time, we do not currently have any accessories that will allow you to...
    view full answer...
  • Need for Transmisson Cooler on Chevy Traverse
    The answer to your question will depend on different factors. My research indicates that the manufacturer stated maximum towing capacity as being 5200 lbs. If you were planning on occasionally towing a small trailer that only weighs 2000 lbs over relatively flat terrain, you will be fine without an additional transmission cooler. However, if you are planning on frequently towing a trailer that comes close to that maximum weight figure through the mountains a transmission cooler would be...
    view full answer...
  • Can Rear Fascia Door Be Reinstalled on 2014 Buick Enclave After Installing Trailer Hitch
    On the 2014 Buick Enclave you will not be able to reinstall the regular fascia door to cover the hitch receiver after the hitch is installed. You would have to get the alternate from a GM dealer. I have seen that it can be expensive and it has to be painted to match the vehicle. If you plan on doing some towing with trailer hitch # 75528 then I also recommend etrailer ball mount kit # 989900. it comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer wiring...
    view full answer...
  • Recommended Hitch and Wiring Harness for a 2011 Chevrolet Traverse
    I would be happy to help you set your 2011 Chevrolet Traverse up for towing. You are going to need a hitch receiver, a couple of wiring harnesses, a brake controller, and a ball mount. Let's start with your hitch receiver I recommend the etrailer Trailer Hitch Receiver item # e98863. This is a custom fit hitch that bolts directly to your Traverse with included hardware. It has a maximum gross trailer weight of 5,000 lbs and maximum tongue weight capacity of 500 lbs. I have linked an installation...
    view full answer...
  • Dimensions for Draw-Tite Max-Frame Trailer Hitch # 75528
    I went out to our warehouse to take a couple measurements on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 that you referenced. I measured a distance between the bolt holes on the left and right side brackets to be right at 43-1/4 inches, on center. The distance between the two bolt holes on the bracket is 2-1/4 inches, on center. I have attached an image with these dimensions labeled that you can also check out. This Class III hitch is confirmed to fit the following vehicles: 2007...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendation for 2017 Chevy Traverse
    For your 2017 Chevy Traverse without the tow package the hitch I would recommend is the Draw Tite hitch part # 75528 as it has a great price, is made by a quality manufacturer, and has great towing capacities. I attached an install video for this for you to check out as well. For trailer wiring you then would want the Tekonsha kit part # 118270 which is a confirmed fit. I also attached an install video for this for you to check out as well. Since you wanted to do some towing you might...
    view full answer...
  • Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
    Since your 2017 Chevrolet Traverse does not have the factory connector but does have a rear air conditioning unit I recommend first checking to see if you have the factory tow package. You can locate the plug for the Tekonsha T-One # 118270 at the rear passenger side as is shown in the attached installation video. If you don't have the factory tow package then you will want to go with the Hopkins # HM11141150. I spoke with my contact at Hopkins who said that he hasn't heard of having any...
    view full answer...
  • Parts Needed to Add a Trailer Hitch and Wiring Harness on a 2016 Buick Enclave
    If you are wanting to add a trailer hitch and a wiring harness to your 2016 Buick Enclave I recommend installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 and then either the T-One # 118270 for a 4-Way or the T-One # 118271 for a 7-Way. If you would like to have both a 4-Way and a 7-Way then install the T-One # 118271 and swap out the connector with the Hopkins # HM40920. To mount the 4-Way near your receiver you need part # 18144 while the 7-Way requires part # 18138. Instructions...
    view full answer...
  • Draw Tite Or Curt Hitch Recommendation for 2016 Chevy Traverse
    In terms of quality you really can't go wrong with Curt or Draw Tite. I wouldn't say one is higher quality than the other in most cases. Based on weight capacity and price the Draw Tite part # 75528 would be what I would recommend easily. Pricing is based on the manufacturer we get the hitch from. To install a 7-way all you need is the part # 118271 which is also a confirmed fit. I attached an install video for this for you to check out as well. If you wanted to do some towing you might...
    view full answer...
  • Has T-One Vehicle Wiring Harness # 118271 Been Confirmed to Fit 2014 Chevrolet Traverse
    The T-One Vehicle Wiring Harness, # 118271, does indeed fit the 2014 Chevrolet Traverse as well as the 2013 model. Glad to hear that you located the hardware kit for your Draw-Tite Trailer Hitch Receiver, # 75528. I have attached an installation video for you to check out.
    view full answer...
  • Recommended Trailer Hitch, Wiring, and 4-Pole Bracket for 2013 Buick Enclave without Tow Package
    The Draw-Tite # 75528 is a great choice of trailer hitch for your 2013 Buick Enclave. You are correct that the hitch will have a welded bracket for you to attach the 4-pole bracket # 18144 too. The holes of both brackets will line up so you will be able to install the bracket easily with the included hardware. I have linked a video where you can see this being done at the 1:40 minute mark. The exterior mounted plug should be equipped on all models of the Enclave, but you will need the...
    view full answer...


< Previous
123. . .9



Do you have a question about this Trailer Hitch?


Used Items Available
Used Picture for Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $146.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Rick A
Test Fit:
Rick A
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee John A
Test Fit:
John A
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Michael B
Video by:
Michael B
Employee Ethan H
Video by:
Ethan H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.