Will Adjustable Tri-Ball Hitch 3371802225 Fit With Tri-Ball Hitch and Hook 3371802208

Question

Question:

I am looking for two hitch items 1 the two hole slide backet that attached to the L shape mount. 2 the three ball and hook to that barcket. These two items are depicted in your hitch assembly titled Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls. The first two items are shown on the left side of the image depicted in your advertisement. Thanks for your reply!

asked by: Rodney C

0

Expert Reply:

From your description it sounds like you are talking about the weldment that comes with the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank # 3371802225 (see attached picture) which is part # 3373001727 and the Buyers Products Tri-Ball Hitch # 3371802208.

I went out to the warehouse to see if these 2 parts are compatible with each other but found that the butt end of the Tri-Ball Hitch extended too far past the hitch pin hole so they won't fit together. I do have an alternative solution for you though.

It isn't as cost-effective, but you can use the Tri-Ball Hitch # 3371802208 with Gen-Y Adjustable 2-Ball Mount like part # 325-GH-314. These are compatible with each other and allow you to retain the max 10K trailer weight rating of both the tri-ball and the Gen-Y.

Attached a review videos for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

I do have an option for you but there aren't any custom fit trailer hitch options for a 2006 Thomas School Bus. That said, we do still have universal options which can be installed either via welding or cutting/drilling. For this, I recommend the…

view full answer...

Answer 2

The Buyers Products Replacement Tri-Balls #3373020620 for Adjustable Tri-Ball Hitch #3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in…

view full answer...

Answer 3

I have a solution for you but I was unable to find any wiring diagrams that specify which wires are which on the 2015 Nissan Titan. Because of this, you'll need to manually trace and test each wire to determine which wire controls which function.…

view full answer...

Answer 4

To install the Draw-Tite Activator Trailer Brake Controller #5504 that you referenced to your 2017 Nissan Titan, all you will need is the Plug-In Wiring Adapter #3050-P if the truck is equipped with the factory 7-Way. One end of the harness will plug…

view full answer...

Answer 5

When wiring a 7-Way on your trailer with 5 wires, your green wire will be right turn/brake, the yellow wire will be left turn/brake, the brown wire will be the taillights, and the white wire will be the ground. You will want to find out if the blue…

view full answer...

Answer 6

If you have Peterson lights currently that look like the Optronics taillights part #STL008RB then the mounting brackets you have now will work just fine as these were made to be basically an exact replacement. We don't have any L-brackets though…

view full answer...

Answer 7

Weight distribution shanks are pretty interchangeable between different brand systems but I do recommend taking a couple measurements on the existing shank for your Eaz Lift system just to be sure. We don't currently carry Eaz Lift products so…

view full answer...

Will Adjustable Tri-Ball Hitch 3371802225 Fit With Tri-Ball Hitch and Hook 3371802208

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching