Replacement Single Axle Trailer Fender for White River Marine Trailers - Galvanized Steel - RH

Video Transcript for Review of etrailer Trailer Fenders - Replacement Single Axle Fender White River Marine - HP22VR

Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this replacement single axle trailer fender for your White River Marine trailers. This fender is going to cover one tire on the right hand side of your single axle White River Marine boat trailer. And this fender is going to, as you no doubt know block road debris from hitting other vehicles and help protect your cargo in your trailer. Now this inner edge is going to tilt away from your trailer to provide extra clearance for your boat and the one inch wide outer edge as you as you can see right here is rounded. And this fender is made here in the USA of galvanized steel which is corrosion resistant and it is already primed. And this is going to be ready for painting to match the finish of your trailer.

And this is a bolt-on installation and the mounting brackets are sold separately. Usually you will want to use your existing mounting hardware if possible. And if you'll notice here the fender holes are going to accept your mounting brackets. Now lemme go ahead and set this back down and give you some overall measurements so you can be confident this is going to work for you. I'm gonna retrieve my tape measure here and just line this up as best as I can to give you the overall width.

So from end to end, as you can see there we are sitting right at 31 inches long, 31 inches long. And then looking at the width, let me get my ruler here that's gonna be a little bit more easier to manage here. So lining this up, we are sitting right at 9 inches wide at the bottom, at the widest point there. And then the top is a little bit more narrow. So let me line my ruler up there again.

We're sitting right at 7-3/4 inches wide. And then setting this back down, lemme get my tape measure again to give you the overall height. And as you can see we are sitting right at 12-3/4 inches tall. Now I weighed this earlier and this weighs about 7 pounds. And again, this is going to be for the right hand side of your White River Marine trailer.

If you are also looking for the left hand side on your screen, I am including our item number for the left hand side fender. You can just take that item number and put it in the search field of our website and it will take you to that fender if you are in need of it as well. Well that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.