Replacement Single Axle Trailer Fender for White River Marine Trailers - Galvanized Steel - LH

Video Transcript for Review of etrailer Trailer Fenders - Replacement Single Axle Fender White River Marine - HP53VR

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a quick look at this replacement Single Axle Trailer Fender for your White River Marine trailer. This fender is going to cover one tire on the left hand side of your Single Axle White River Marine boat trailer. This fender, as you no doubt know, is going to do a great job of blocking road debris from hitting other vehicles, and help protect your trailer's cargo. This inner edge, as you can see here, tilts away from your trailer to provide extra clearance for your boat. And on the outer edge here we have a one inch wide edge that is rounded.

And this fender is made here in the USA of galvanized steel. It is corrosion resistant, and it is primed and ready for painting to match your trailers finish. Now, this is going to be a bolt-on installation and the mounting brackets are sold separately. Usually, you will want to use your existing mounting hardware, if possible. The fender holes that you see right here and right here are going to accept your mounting brackets.

And let me go ahead and set this down and give you some overall measurements so you can be confident that this is going to work for you. So measuring the overall length, and I'm gonna be lining this up here to get it at the longest points here, the longest point of this fender. As you can see, we are sitting right at 31 inches long. And then the overall width, lemme get my ruler here for these measurements, it's gonna be a little easier to handle. So measuring at the widest point here at the bottom, we are sitting right at nine inches wide.

And then at the top here it's going to be not as wide. So lining that up here, we are sitting right at seven and three quarters inches wide here at the top. And then let me go ahead and give you the overall height. Ready my tape measure here again. We are sitting right at 12 and three quarters inches tall.

Now this weighs about seven pounds. And again, this is going to be for the left hand side of your trailer. And if you're also in need of the right hand side fender, on your screen I am including our item number. You can just take that item number and put it in the search field of our website, and that will take you to the right hand side fender for your White River Marine trailer. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.