Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 14" to 15" Wheels - Qty 1
(2486 reviews)
Price: $38.97
In Stock
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 14" to 15" Wheels - Qty 1
Item # HP89FR
Our Price: $38.97
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2486)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Fenders - HP89FR
- 14 Inch Wheels
- 15 Inch Wheels
- For Single-Axle Trailers
- Steel
- 32 Inch Long
- Bolt-On
- Weld-On
- 9 Inch Wide
- No Step
- etrailer
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
- Rounded fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
- Close fit keeps dirt from building up between the fender and trailer
- 1" Wide outer edge is rounded
- Ribbed, 16-gauge, cold-rolled steel is tough and sturdy
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 14" to 15" diameter wheels
- Dimensions: 32" long x 9" wide x 15" tall
- Quantity: 1 fender
- Weight: 9 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFS00494 Single Axle Trailer Fender - 90-Degree Back - Cold Rolled Steel with Ribs - 14" to 15" Wheels - Quantity 1
Video of Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 14" to 15" Wheels - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Trailer Fenders - Single Axle Trailer Fender - HP89FR
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this etrailer single-axle steel trailer fender with the ribs for 14" to 15" wheels. It is for a quantity of one fender. Now this is a nice rounded fender that'll cover one tire on your single axle trailer. This fender will act as a splash guard, helps keep any road debris from hitting other vehicles, and also helps protect your trailer's cargo.I wanted to show you the outer edge on this.
Right here you can see has a nice 1" curve radius lip to it to give it a real nice appearance, and on the inside lip, it has a 90-degree lip on the inner edge and that allows you to mount it flush to the enclosed trailer. This fender is a sturdy ribbed 16-gauge cold rolled steel construction. This can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish. Now, the ribs we mentioned on this, you can see this one has three ribs. Those are actually stiffener ribs.
They are designed to help eliminate flexing of the fender.Now, this is a weld-on or a bolt-on installation. It is not pre-drilled, and the mounting brackets for bolt-on installation are sold separately. This fender is made in the USA. Few specs on this. This is for a quantity of one fender.
Again, the application is a single-axle trailer with 14" to 15" diameter wheels. The weight on this fender is only about nine pounds, and the last thing I want to do is just give you some dimensions on this, so I'm just going to flip it over and we're going to measure the length, the width, and then the overall height. So the length from one edge to the other is going to be right at 32" long. The width on it. It's going to be right at 9" wide, and the overall height, we just flip this back over.
From the bottom, very top is right at 15" tall.That should do it for the review on this etrailer single-axle steel trailer fender with the ribs for 14" to 15" wheels for a quantity of one.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Alternate product found
- Wrong item was ordered
Customer Reviews
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 14" to 15" Wheels - Qty 1 - HP89FR
Average Customer Rating: 4.8 out of 5 stars (2485 Customer Reviews)
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.by: Roderick 03/01/2024
I welded and bolted it with mounting brackets on my tow dolly. I painted it with a primer and then a glossy black. Added tail lights and front markers. Good solid fender
by: Robert 05/06/2024
Very sturdy and well made.
by: Mike 11/09/2021
I was impressed with how soon you got the fender to me. It looks really good. It arrived this afternoon, so I haven't got it mounted, but I don't anticipate any problems.
by: Cody 08/02/2023
by: David 03/04/2021
Heavy Duty Easy to Install
by: Tom 12/17/2023
by: Aaron 12/03/2022
by: Kent 02/21/2021
by: Steven 08/11/2023
by: Christina 06/26/2021
by: Kimble01/04/2022
by: Donald05/29/2023
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
by: Jerry05/06/2022
These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
by: JO12/30/2022
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
by: Joey03/13/2024
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
by: Fredrick02/24/2024
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
by: Ryan R08/02/2023
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
by: Stephen01/13/2024
This is an exact replacement for another product that I previously purchased with a back plate for my father's homemade boat trailer. I lost the fender on a long haul of his boat, but not the back plate. I was able to bolt on the original back plate. I am completely satisfied with this product.
by: Steven03/29/2024
Item arrived quickly, well packaged and in perfect shape! Worked perfect for my jetski trailer.
by: Matthew10/27/2023
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
by: Steven 04/26/2024
I looked at pretty much every source for purchasing utility trailer fenders in the size range needed. My concerns were tire coverage and fit on a 4x5 trailer. The rounded fenders are far more common than the Jeep style, I found. In the end, these were the best price and concurrently the best gauge of steel - weldable. They look solid. No issues once I laid eyes on the fenders.
by: Stanley02/10/2024
I purchased a setof Single axle trailer fenders for my utility trailer about a year agl. etrailer provided good measurements that I thought would fit the existing mounting brackets and I was happy to see that they were a perfect fit. I cleaned and painted the fenders before I mounted them and after a year they still look great. I am quite pleased with the purchase and the information provided by etrailer.
by: Kirk 04/27/2024
Quick delivery. Solid metal fender. Easy install with screws or could use L brackets. Great value for price.
by: Jesse03/01/2023
Worked great. snug but fits 275/75/r18 (~33in) tires so I can match my tow vehicle. overlanding trailer build. Originally done in exterior black semi gloss. After chipping following 3k mi swapped coating to primer + two coats of truck bed liner which has adhered really well. Durable. When well supported they can work as a step for me. I did mod them to bring them down in width to form better for my application (would have been too wide, extending 3in past the tire). Responded well to being trimmed. Applied typical rubber-coated 1/8in edge trim to cut side where that met the trailer wall. While not precisely the right item for my unique/custom application, its durability and workability to fit my project was great.
by: Ken 03/18/2024
I’m very satisfied with the overall outcome of ordering my trailer fenders from the online order process to there timely delivery. Of most importance was the quality of the fenders. They were made of heavy gauge sturdy steel. I’ve been closed some photos showing the final product after painting. I would definitely order again if necessary. Thanks trailer.
25
2481
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Can Backing Be Added to etrailer Single Axle Trailer Fender for Enclosed TrailerYou can add a backing plate to the Single Axle Trailer Fender for Enclosed Trailer # HP89FR by using the Pre-Cut Fender Back # 12FB-32R, but this fender is also available with the backing already installed as part # HP36VR so it's less work you have to do in the long run. Attached are some review videos for you to check out.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike
11/10/2022
It is as good as the original fender and still looks as good as it did the day I put it on the trailer.