Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
9-5/8" Wide x 42-5/8" long x 12-3/4" tall. High-density polyethylene fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color make scratches virtually invisible. Built-in top and side steps.
Features:
Specs:
Note: If ordering more than one fender, order part F008574-2 to save on shipping costs.
Dimensional Information
| A | B | C | D | F | M1 | M2 | M3 | M4 | Wheel Size | Part No. - White | Part No. - Black | Part No. - Silver | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style D | |||||||||||||
| 9-5/8" | 8" | 42-5/8" | 12-3/4" | 2-7/8" | 30-1/4" | 4-1/8" | 2.12" | 3-3/4" | 14" | F008574 | F008584 | F008594 | |
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (84 Customer Reviews)
9-5/8" Wide x 42-5/8" long x 12-3/4" tall. High-density polyethylene fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color make scratches virtually invisible. Built-in top and side steps.The fender was an easy install and lined up with the existing brackets. I added cutouts for the fender lights, and the fender now looks the same as the original on the other side. Good price too!
Bolt holes were in the wrong place for my bracket. Had to drill new holes. Also very tight for a 14 inch tire. Worried inside might rub if tire ounces much.
Picture is with fender using origional holes.
Always get great service from Etrailer! Good parts selection also.
It came a lot sooner than I thought. Looks great and I’m sure I can make it fit.
I need another one for the other side.
I order my trailer fender it came in a short amount of time. It was as good quality as factory and it fit perfectly.
Jeff
7/8/2021
Still looks as good as new.
These were for my 2012 Shorelander fishing boat trailer. We use the fenders as steps a lot and the inner bolt holes in the plastic fender broke and the fenders tilted in wearing against the tires. This ruined the tires and almost wore through the inner fender surface. Instead of fixing the original fenders I bought these new ones. Unfortunately they don't fit, the bolting flanges are 1/4" further apart than the trailer brackets and the bolt holes are in the wrong locations. The original fenders are 1-1/8" wider inside which gives the desired room for the tires. The plastic is much thicker on the original fenders. I could make modifications and use spacers to make the Fulton fenders work but they would be real snug around the tires and probably not a good idea. It would be more work to modify the new fenders so they work than to fix the old ones which are a better product and fit. The Fulton fenders have a nice finish and are good quality. They were only $[XX] each so I can't expect perfection. If etrailers let me return them for a refund, I'll only be out the cost to UPS them back and it was worth trying. I think etrailers is good company and don't thing the return will be a problem.
I thought that this would bolt on to my Karavan trailer. I knew it had to be painted. Well when I got it I had it painted and I went to mount it. Well it does not fit as I thought it would and has to be modified to work. I will give it a 3 as it is light plastic.
Sierra K.
11/1/2021
Sorry that this product was not as expected. You would need to supply your own mounting brackets for this. The back of the fender bracket mount installation cut out is 4 and an eighth of an inch. The inner precut mounting slots are 3 and 3 quarters of an inch.
Bought this Fulton trailer fender for my 2005 Shorelander trailer and based on your given spec's it was an exact OEM fit and was 1/2 the price of the OEM fender.
This has a 300 lb maximum step rating which is 100 lbs more then the other cheaper brands. This fender is specifically made for my 14" wheels. P/N F008574.
I used 3 day shipping to get my fender and it was delivered on time as promised. My installation time was about 20 minutes. I give this a (A+++} rating!
Nice enough fender with reasonable cost and shipping charges. Problem is that, as mentioned in some other reviews, the fender is not useable on many of the Shoreland'r trailers because it is not tall enough or wide enough to clear the size tire that comes on the trailer. My fender was damaged when the tire blew and it took both ends off the fender. Only option for me was to cut the ends off of the new fender and bolt them to the supports that were exposed from the previous damage. It isn't real pretty but at least I have the clearance lights back in place. If I had read the reviews for the black color fender I would have known that there might be a fitment problem.
Worked to restore look of trailer. Had to modify as it's not an exact fit but holds up well.
Great value, about 1/3 of the OEM price for the same basic product. Had to drill 2 holes to allow perfect alignment and the fit. Even though the product is indicated for 14" wheels is a little tight compared to the OEM fender it replaced. Hoping it won't rub on the tire. etrailer was superfast with shipping. Overall, i saved about $90 using etrailer.com and will continue to use this vendor.
Exactly matched the fender that was on my yacht club boat trailer. Website was very detailed and help me confirm before I placed the order that it would work! It's very sturdy and was a 15 minute job for me to install!
Fender for boat trailerThis fender is replacing similar old ones on my boat trailer. My trailer has 15" wheels and I was initially stumped because the new Fulton 15" fender dimensions are significantly different than my old fenders. I figured out that the trailer manufacturer used fenders with the dimensions of the Fulton 14" fenders, but there is plenty of headroom for 15" wheels.
These fenders have good traction on the side steps and top and seem rigid enough. I have yet to mount them. I would have preferred a beige option to match my trailer, but white will work fine. The shipping packaging was excellent and arrived earlier than I expected. I am a repeat customer of etrailer and have been pleased with all purchases.
This fender was to replace a damaged one on my 2009 Tidewater boat trailer. The online description showed the flange to flange distance between the fender bolting connections as 30.5 inches, but my trailer is 30 inhces exactly. I ordered anyway, thinking I could cut or otherwise adapt the new one. As it turns out the new fender is a perfect fit, no adjustments needed at all. I am very pleased.
Fender came in great condition, and shipping was fast. It’s a exact match to the other fender on my boat trailer, so nice, I have decided to replace the other side fender as well
Thank y’all
Great product looks awesome. Fits as perfect as a glove. Strong durable plastic for myself to stand on. The only problem is it does not come with a bolt on kit for attaching the fender to the trailer. My old bolts was rusted and the bracket was junk. Had to made a new bracket with scrap metal and bolts I had laying around.
I own a ShoreLand'r boat trailer and the fenders were cracked and faded so I looked at replacement fenders from the manufacturer and the price was twice the amount of the Fulton fenders. I'm very pleased with the Fulton brand. I did have to add a spacer between the frame and fender but this was a minor thing.
Seem like they were made for my 2004 Shorelandr trailer with mounting holes and slots for the supports. Fit well. 5 stars will be if they hold up to being stepped on for a couple years!
etrailer was great as always. Order processed quickly and shipped. Great service with easy to use website. Full of instructional videos as well. Didn’t need for the fender but have used the videos in the past??! Fender was just as advertised
Difficult to find a fender for my trailer, until I found etrailer. They found it and shipped it got it quickly, completely satisfied.
this fender was built better than the original .it fit perfect and the lights were at the the right angle. good product.
Easy to assemble on the trailer. It was an exact fit
This fit my 1990 shorelander trailer with a little adjustment. Looks like the original fender.Great product at a low cost.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Herb
9/6/2021
It’s been a great addition. Holding up very well. Seems identical to the one that was on the trailer when we got it.