Customers prefer these similar products
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
Features:
Heavy-duty strength in a lightweight package: the TorkLift Talon tie-downs are the premium choice for heavy truck campers and unforgiving climates. Made of military-grade aluminum alloy, the removable arms are rustproof and robust while also being lightweight and easy to handle. The receiver brackets are constructed of rugged stainless steel, and both components are protected by a high-impact powder coat finish that guards against wear and tear.
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity is going to sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush to the underside of the vehicle. Remove the arms from the brackets when you're not using them and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.9 out of 5 stars (67 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
The Talons and the fast guns are awesome products, fit and installation was very easy. The products have held up very well and will for a long time. The extra money spent for this set up was very worth it. It takes no time at all to secure the camper down and the fast guns have never needed adjustment after initial set up. ETRAILER was great to work with and followed up after sale. Products shipped quick and were in stock. They also had lots of information posted on YouTube to ease installation. Great company, great products by Torklift!
Installed on a 2016 RAM 3500. No issues. These installed very easily but you'll probably want to use an air-impact gun to get the hitch/bumper bolts loosened.
I bought the Torklift camper tie downs for my new 2017 Ram 3500 dually. I haul a Lance 850 slide in truck camper. They came today and I installed them in about 4 hours. (I work slow) I bought the Aluminum ones so I don't have to worry about any rust. They look great and like the Torklift that was on my old truck I am sure they will give me great service.
Fit perfect with no drilling.
I installed these on a 2015 ram 3500 crew cab dually with a factory hitch. Very easy to install (1hr) and fit perfect. I'd recommend these
Another retailer canceled my order and would not return my calls. etrailer sent it out right away and I had it in time to install before my trip. The Talon Camper Tie-Downs fit and performed perfectly. Instructions were accurate and helpful.
Torklift makes the best truck camper accessories period! Best value for the best price.
Excellent buying experience. The tie downs were shipped promptly and received on schedule. They were installed within an hour with no surprises on my 2016 f150 longbed. Looking forward to their use.
The tie-downs were a bit difficult to install for a novice but if you follow instructions closely they did install as outlined in the instructions. They are lightweight and have held my camper in place very well. I am happy with this purchase.
Installed easily and works great!
Torklift frame mounted tie downs are a great product. The rear ones are easy to install. The front require a bit more skill and an extra set of hands. It’s a bit nerve wracking thinking you might loose the bolts into the frame! I upgraded my truck from an F150 to an F250. Because the brackets aren’t transferable, I had to get a new set and install them on my F250. I was glad I had the experience with the previous brackets on the F150 because the ones for the F250 are a bit heavier and more challenging to install. But I was able to do it with an extra set of hands to hold the brackets on to the frame. The fact that I went with the same Torklift system is a testament to the product. If you can afford aluminum, they’re beautiful and light. But once everything is in place, there’s no functional difference.
etrailer has great installation videos for the F150, but not the F250. I wish they had install videos for the F250 because it’s a bit more challenging, requiring an impact driver to loosen the nut on the driver side leaf spring.
Excellent product. Good customer service. I will always use tork lift products from now on.
etrailer is an excellent vendor as well.
I upgraded from happy jack camper tie downs. I like the aluminum talon tork lifts for their easy installation, zero corrosion liability, and unimposing appearance when not in use.
It's a little tricky feeding the bolts through the frame (almost lost one, but a little tape on the bolt/spring helped), but a great product otherwise. The mounting scheme for my Chevy 2500 HD is strong and ingeniously designed. No drilling or welding. The aluminum won't rust like other tie-downs mounted to the frame. It was well worth the extra money to get the aluminum version of this product.
better for the rear than the happy jack bumper mounted ones more stable and easy to use
Easiest installation available. These fit perfect and attach just as instructed. The only issue you may have to watch is that on some truck frames, mine being one of them, Ford covers one of the holes with a black sticker that states, "No Mounting Bracket". In my case, the writing on this sticker was covered by a film of road grime and I had problems even finding the hole to dry fit the bracket until I cleaned off the frame with solvent. The actually TorkLift kit fits the frame perfectly though. The passenger rear bracket is very close to the exhaust pipe so when diesel particulate filter regeneration cycle begins, it will melt the label off the bracket but does not appear the even burn the paint on it so should still be OK, just be aware when unhooking the tie down from the bracket as it could be very hot.
I recently purchased and installed TorkLift Talon rear tie-downs for my 2016 Ford F150supercab 8ft box. Installation was very easy with well explained directions. Product is excellent quality and will last the life of my truck. I only wish the front tie-down application was available, I would buy it in a heart beat. I will continue to check to see if front application becomes available.
GREAT service, super fast, thanks!
Installed stable loads on my 2016 super cab, 6.5 bed length truck to haul my truck camper.
Product showed up as described.
Worked great.
Refer to review number 1. Thank you.
Do you have a question about this Camper Tie-Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.