Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this low-profile bumper door holder to keep your RV or trailer door open while you're loading and unloading. Bumper also prevents the door from banging into the side of your trailer. Mounting screws are included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, I'm Ellen here etrailer.com. Today, we're taking a quick look at the JR Products Low Profile Bumper Door Holder. So this is just going to be a pretty simple way to keep the door on your RV or your enclosed trailer open. So the little nub here is going to just fit inside the keeper. This is going to be made of a rubber material, so it does have some give to it, so it'll stretch and conform around that little nub, and it should just pop into place. And I don't want to push that all the way in there, since I don't have the screws in place, it might be kind of hard to get out without it actually being attached, but that's basically how this is going to work.
And it does a pretty good job of holding that in place, comes with the two screws for either side of that so we can get this attached wherever we need it to be.As far as the size, I'll give you guys some measurements. So our rubber piece is about one and five eighths in diameter, one in five eights inches in diameter, and then about one and a half inches tall. Our little nub guy is about an inch tall, and then it's got kind of these flat sides on it, and that's about seven eighths of an inch across for the flex, and then if we go to the point, it's about an inch. I'll just give you the difference there, and our screws measure about an inch and three eights long, going from the bottom of the head or where the threads start on those.You just need Phillips head to get those installed, and it does come with those. It's also covered by a lifetime warranty from JR Products.
That's pretty much all there is to it for the JR Products Low Profile Bumper Door Holder. If you need any other accessories or replacement parts for your RV or enclosed trailer, you can always turn to us here at etrailer.com. We've got a lot of information and a lot of options for you guys to get down the road, and enjoy your vacation without having to worry about the parts. Thanks for watching, and we'll see you next time.
Average Customer Rating: 4.9 out of 5 stars (81 Customer Reviews)
Use this low-profile bumper door holder to keep your RV or trailer door open while you're loading and unloading. Bumper also prevents the door from banging into the side of your trailer. Mounting screws are included.
The door holder holds very well - almost too tight as it's hard to get the door back out of the holder. I might try putting a little Vaseline on plug. Tear drop trailer doors are small and the holder is located in the lower outside corner. That pretty much requires a firm low edge grip to pull the door out of the holder. The good think is that no amount of wind will loosen the door, within reason.
This is an exact replacement for the anchor locker hatch holder on a Boston Whaler Montauk 170 center console boat, at a fraction of the price that the Whaler dealer sells it for. Used different hardware to attach it to the boat, and after a year of use it still holds the hatch closed in rough water and the rubber has not deteriorated.
We utilize these bump stops on a bar that is utilized 12 - 16 times a day, the product is robust and temperature doesn't seem to affect its performance. I would recommend these for anyone looking for a great retainer where quality and durability are in high demand.
Perfect replacement and quick shipping
WORKS GREAT FOR OUR APPLICATION
I had these bumper door holders on an enclosed trailer and they worked wonderfully so when I bought my shed, I wanted them for the doors as well. They hold the door even with normal strong wind gusts (I never tried them during heavy wind gust warnings). I love them. I just wish they had some extended profiles for the side door because with the handle, the door would open into the window glass with the low profile. Had these for a year and still going strong in the outdoor elements.
Service was awesome. Arrived quickly and was exactly what I needed.
Buy with confidence excellent products great staff fast delivery
Attention Land Rover Defender D90 Soft-Top owners. This part is a perfect replacement for your swing away tire carrier. If yours is 25 years old time to get a new one.
The rubber socket is too large to hold the plug effectively. I did a replacement due to my old sockets being worn. Im not a bit better off with the new parts. The plug goes right in the socket but won’t hold. Very disappointing!!
Jenny N.
3/31/2023
I am wondering if the one you received is defective as typically these work work. I will have Customer Service reach out to assist.
I needed these for a horse trailer and thought I’d have a hard time finding them. I went trailer.com and within a few minutes found them! Fast shipping and exactly what I needed!
Works pretty well.
Works great!!
Perfect replacement for my old door bum pers
it's definitely what I ordered; haven't attached to the trailer yet, but I'm sure it'll work fine.
Shipping was quick....thanks!!
Item was received on time and does exactly what I expected. It was described accurately. Very satisfied with purchase experience.
CHECK FOR PHOTOS
The trailer door holder worked perfect for our application. These were actually used to hold open shed doors. I have attached the picture of them mounted to our doors.
Perfect replacement for my rotted out, broken rubber bumper door holder! Highly recommend etrailer products; great prices and quuck shipping, too!
This is perfect. The original one was getting loose and eventually the screw came out. This new one is exactly what we need. Thank you for the fast deliver and a good replacement product.
This was a replacement on our horse trailer. Identical to the original so it fit perfectly
These bumpers provided a direct replacement for use on the rear doors of our horse trailer. It'll be nice to again be able to keep the doors held open when desired.
Thanks for the follow up making sure I received my order and on top of emails along the way I have not opened any of it yet but I am sure it will be right for I have ordered other stuff and it’s always been correct and very good products. Thank you to your whole staff for always being committed to quality service.
I am very please with this company . AS a business own I know first hand how important it is to make sure your customers are well taking care of . These guys did just that . One of the items was missing from my order with out hesitation they shipped it out the very next day. All the parts I ordered worked very well shipping was very fast. Thanks guys
Direct replacement for 20 year old hold er
Worked great on our horse trailer.
Do you have a question about this Trailer Door Holder?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Karen
1/18/2024
Still working great. No problems will rubber materials. Holds door firmly open.