Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
Average Customer Rating: 4.8 out of 5 stars (159 Customer Reviews)
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.
These are the BEST hands down! The originals, a must have if you want to keep your axles in optimum dependability. Easy to install, easy to service, and peace of mine knowing the bearings are greased. Great customer service and knowlageable help with getting the correct size.
Ordered these for my 5th wheel trailer 8 days before vacation. They were shipped and received with 3 days to spare. Installation was flawless. Thanks etrailer. Well done!
Great product, easy installation.
Bearing buddies look better than what I have
Jack
12/16/2023
Bearing buddies are nice simple to use but the main thing is to make sure you’re using the correct grease for bearings not just Plain old grease which will work in the short term but not recommended for the long haul
Bearing Buddy fit perfectly. Made in the USA still means something!
Your product arrived on time and undamaged. It installed exactly as described in the literature. I am very pleased with my new Bearing Buddy's. As a side note I noticed a small amount of chrome machining debris inside the hub of the housings. It was easily cleaned out with a rag before installation. These Bearing Buddy's are installed on a 32 year old utility trailer I am refurbishing. Although the trailer is small (4 x 8) it has a 5000# axle and has seen some pretty tough use. Ive attached a pic of the trailer undergoing refurbishment along with a couple of pics of the installed Bearing Buddy's. Excellent product and service!
This product is as good as their rep have used them before on a
boat trailer never had a bearing go out as long as I used the
buddy bearings they are great! Service was just as good.
These bearings were installed on a heavy duty low boy trailer.
No pictures trailer is in South Texas about 300 miles from my location. Hauling oil field equipment. Picture of the trailer being
overhauled before new fenders were added.
everything was great thank you
Alex spoke English and was knowledgeable about what I needed
Product as advertised, shipping speed was not fast but reasonable I think, shipping charge was very reasonable
These buddies have the correct depth and the slip on contact area is not chrome so the buddies holds tight.
Work great, have absolutely no problems with these bearing caps. Work much better than the etrailer brand caps I ordered at the exact same time for my other trailer.
Great product but I always have issues with the rubber caps coming off once they get a year or 2 of age on them,
Great for, I didn’t realize I had the ez lube axles and didn’t need these. I really like the covers better than the cheaper ones. I removed the inner zero assembly so I can use these as caps. Much thicker material and better looking.
While we only just received out bearing buddies. They are as described and installed easily. The only trouble was the beauty covers don't fit over the hubs any longer. Doesn't really matter as the product is attractive. The wheel studs not so much but we can live with that.
I will have to write another review after we have taken a few trips and greased things up a bit.
Nice item and very easy to install, trouble free traveling.
I recently upgraded to electric over hydraulic disk brakes from the hydraulic drum surge brakes that were on my boat trailer when I bought it. I scoured the web site and put together a list of parts for the conversion but still had a few questions. Lisa was most helpful and had some additional suggestions. She made my etrailer.com shopping experience the best online shopping experience ever. Once I had the brake parts I found my old Bearing Buddies didn't fit the new hubs so I ordered new Bearing Buddies and new coupler while I was at it. I ordered them on Sat. and they arrived today, Tuesday. I already have the new parts on and they are working perfectly. Thanks etrailer.com and thanks Lisa. You have a new customer for life.
Putting off greasing wheel bearings is so easy to do. Bearing Buddies make greasing wheel bearings easy because they give incentive. Only takes 5 minutes vs a couple of hours. Being on the side of the road with a break down from bad bearings isn't fun and totally preventable.
Bearing buddies showed up with one missing, emailed CS and they shipped out two more! Emailed back that I only needed one and to send me a RAN.
Great experience and will use etrailer for further purchases.
Lost one cap and the old ones were from a 2000 trailer. Working fine. good product.
Bill F.
9/8/2018
no problems, have traveled locally and to different states.
I put 4 of these on my 26' fifth wheel. The installation was very easy and exactly as described. I tapped them gently with a hammer to get them started and then used a block of wood and hammer to seat them fully for a nice tight fit.
they came in the mail when you said they would. they were exactly what i wanted, and they fit perfectly. you people know what you are doing. if i need anything else that etrailer sells, i will surely order it from you
wayne w.
sampson city,fl
Wayne W.
9/5/2016
the protectors are fine, but the rubber covers have disappeared. i pushed all the air from them when i put them on. do you sell them seperately? other than that i am happy with them. thanks wayne
Rachael H.
9/7/2016
Helpful Links
I've been using Bearing Buddies on my boat trailers since the early 80's and never had a trailer bearing fail. These are still the best solution to protect any bearings that get submerged. Make sure they are pumped up before each submergence and everything will last forever.
The product and the service was exceptional. The Buddy Bearings fit exactly and were easy to install. The items arrived in a few days through the US mal without any problems. It was really nice to be able to track my order so I'd know when it was arriving. I will be ordering any additional items needed from etrailer.com because they actually had the best price I could find.
Purchased for my Utility trailer, fast shipping , perfect fit , great selection , have purchased fenders etc from etrailer before very happy with all my purchases
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
6/26/2020
Just started our camping season. Pulled the caps off, hooked up the grease gun, pumped some grease and done. Took longer to write this then grease. No pulling the 4 tires to get to the bearings and getting my hands greasy.