Bearing Buddy Recommendation for 5,200 lb Axle Kodiak Rotor Hub
Question:
I see nothing about the size of the dust cover/cap for this khr12d hub. will the 2441 bearing buddy work? Also, will the dust driver tool 290-992 work with the 2441 bearing caps.
asked by: JErry
Expert Reply:
The correct bearing buddy for the Hub part # KHR12D that you referenced would be based on the 15123 outer bearing that the hub uses. Based on that you would want the Bearing Buddy part # BB2441.
Installing the Bearing Buddy is pretty easy and would not work with the tool you mentioned. I have included a link to a video and if you fast forward to about the 5:20 minute mark, our installer puts one on. He lines it up first and gives it a tap to get started. Then he places a block of wood over the end of the Bearing Buddy. The block of wood disperses the force of the hammer used to tap it into place.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Q&A: Replacement Brake Line/Hose for Dexter 8K Disc Brake Axle
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Video: Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KHR12D Review
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1.5'
- Video: Kodiak Trailer Hubs and Drums - Hub - KH42655S Review
- Video: Kodiak Brake Pads Review and Installation
- Video: Review of Kodiak Trailer Brakes - Replacement Caliper Guide Bolt - KGBS
- Shop: Fifth Wheel Hitch
- Video: Kodiak 6 Foot Hydraulic Brake Hose Installation
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Grease Cap with Plug - TRU66FR
- Q&A: Recommended 5th-Wheel Hitch for 2017 Ram 2500 with 6.4 Foot Bed
- Shop: BOLT brand vehicle and hitch locks
- Search Results: 6 leaf slipper spring
- Search Results: k2hr712d
- Shop: Towing Mirrors
- Article: The Best Towing Mirrors
- Search Results: surge brake actuator
- Search Results: kodiak 12
- Search Results: trailer hubs and drums
- Search Results: marine grease
- Search Results: 25520
- Q&A: Where Is Fuse For 12v Power To 7-way Connector In 2020 Ram 1500?
- Q&A: Do Trailer Bearings Fit Tight To the Spindle they Install On