Correct Bearing Buddy Bearing Protectors for 1996 Ranger 461 Boat Trailer

Question

Question:

I need bearing buddies or equivalent for a 1996 ranger 461 single axle trailer, serial number 18WRT1918V1D66475 Not exactly sure what size? Thank you!

asked by: Randal S

0

Expert Reply:

In order to determine which Bearing Buddy Bearing Protectors you need you will need to measure the diameter of the hub bore on your trailer. I recommend using a digital caliper like the # PTW2993 in order to get an accurate measurement. Once you have this measurement you will be able to select the correct Bearing Buddy. For example, if you found that you had a 2.441" hub bore you could use the # BB2441.

I have attached a picture showing where you need to measure, along with a link to all of our Bearing Buddy protectors that can be filtered down by hub bore diameter.

expert reply by: Robin H

0

Hub Bore Measurement.
(click to enlarge)

Answer 1

If there is any grease outside the hub or if there is water inside the hub then that would indicate that the seal on the Bearing Buddy Bearing Protectors like part #BB2441 is compromised and would need to be replaced. That said, I have not heard of…

view full answer...

Answer 2

A Bearing Buddy allows you to pump grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. You can pre-pack the bearings if you wanted to but…

view full answer...

Answer 3

There is no need to further re-pack the bearings with the Bearing Buddies like the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) #BB2441. So long as you maintain the grease levels, repacking the bearings isn't…

view full answer...

Answer 4

With Bearing Buddies it is still recommended that you pack the bearings by hand. The Bearing Buddy can only push grease through the front of the hub which can be helpful but does not take the place of packing the bearings properly by hand. I…

view full answer...

Answer 5

Technically speaking, once the bearings are initially packed, you shouldn't need to repack them. I'd still recommend breaking the hub down occasionally to inspect the bearings and races to make sure everything's in good condition.

view full answer...

Answer 6

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

view full answer...

Answer 7

The Bearing Buddy Bearing Protectors #BB2441 provide premium protection for your wheel bearings. It is still recommended that you inspect the bearings, races, and seals every 12 months or 12,000 miles to ensure reliable performance on your trailer.…

view full answer...

Answer 8

Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. When the hub and seals and bearings are first assembled, they should…

view full answer...

Answer 9

The difference between the two rim designs you mentioned is just a visual difference. The mini mod wheels are a white rim that have small circles that run around the mounting flange of the rim whereas the other white style you referenced has…

view full answer...

Answer 10

Both the Dexstar Steel Spoke Trailer Wheel #AM20352 and the Dexstar Steel Mini Mod Trailer Wheel #AM20365 that you referenced are made of the same material and have the same powdercoat finish so either would be just as great as the other when being…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...