Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
(358 reviews)
Price: $446.91
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
Item # 7359765-I
Our Price: $446.91
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (358)
- Q & A (0)
- Photos
Dexter Trailer Axles - 7359765-I
- 3500 lbs
- 95 Inch Long
- 80 Inch Long
- 5 on 4-1/2 Inch
- No Drop or Lift
- Leaf Spring Suspension
- Idler Hubs
- Dexter
- Easy Lube Spindles
Straight trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. E-Z Lube spindles for simple lubrication.
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs
- Low ride height makes it easier to load and unload your trailer
- Straight, E-Z Lube spindles - no drop
- Built-in grease zerks for simple lubrication
- Spring seats and spindles are welded on
- Cast iron idler hubs are sturdy and durable
- Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
- Made in the USA
Specs:
- Weight capacity: 3,500 lbs
- Hub-face-to-hub-face length: 95"
- Spring-center-to-spring-center length: 80"
- Hub bolt pattern: 5 on 4-1/2"
- Axle tubing outer diameter: 2-3/8"
- Grease cap outer diameter: 1.986"
- Wheel stud diameter: 1/2"
- Wheel size: 13" - 15"
- Limited 5-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
E-Z Lube Spindles Make Lubrication Simple
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
7359765 Dexter Trailer Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 3,500 lbs
84545UC1-EZ (K08-248-91) Dexter Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - EZ Lube - Qty 2
457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge
Customer Reviews
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs - 7359765-I
Average Customer Rating: 4.8 out of 5 stars (358 Customer Reviews)
Straight trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. E-Z Lube spindles for simple lubrication.by: Jesse06/07/2022
Fits as it should. EZ lube hubs are much easier than having to repack the bearings. This is the second purchase I’ve made from etrailer and their service has been great.
by: Matthew 10/04/2023
Used it on a homebuilt trailer worked great and tracks perfectly.
by: Dan R.08/21/2020
I had a utility trailer that my son used to transport a car. Apparently the car was heavier than the 3500 lb axle was able to support and he bent the original axle. The first indication was that the insides of the tires started to wear very quickly. I purchased a Dexter from etrailer to replace it due to the fact that it had the same inverted camber like the one that was originally on the trailer. I was rather impressed with the new axle. It came shipped ground and was delivered in a reasonable amount of time. Once received, I realized that I had ordered the wrong bolt pattern for the hubs. Thankfully etrailer had the correct hubs for the trailer in stock and I subsequently purchased the correct hubs to replace them. they also arrived in a reasonable amount of time. The new axle fit the trailer with absolutely no problems and installation was very easy. My tires are no longer wearing out, I'm happy.
by: Andrew06/20/2022
I had a seemingly uncommon axel on my Haulmark 16', tandem axel, enclosed trailer. 95" with spring center of 82". Couldn't find these specs anywhere, so I ordered Dexter 95"with 80" spring center. Had a friend move the spring brackets to 82". Took him about an hour total. I installed new axel yesterday. Without ant assistance, I was able to install the new axel in about an hour. Perfect fit. Great price, panphenomenal and fast shipping.
Will be ordering a new axel for my flatbed soon.
by: Tom S09/26/2019
Ordered the axle for my equipment trailer after finding out the spindles were shot. As with everything I’ve bought from E trailer it came super fast and was a perfect fit. Everything was quality material and just as ordered. Thank you E trailer a
by: David08/04/2022
Great service, I delt with Amy and she was super helpful, I had ordered the wrong item and she helped me get the correct one and informed me how to handle the return.
by: Danny06/21/2019
The axle was great.The hubs were the wrong ones. That was my fault. I knew about the five on four and a half bolt pattern.and the five on five. I did not know there was a five on four and three quarter. Even though it was my fault,they were extremely helpful. I have ordered here before. And I will order here again. Thanks for the great service.
by: Ben 12/22/2021
Just received my order today. It’s been back ordered for a while, at no fault of etrailer, but they kept me informed about the status of my order and offered other options that were in stock multiple times. I’ve dealt with them a few times and they always have great customer service.
by: Dale 06/23/2020
Ordered on Saturday, delivered on Thursday. Very fast! Put the new axle in and it fit perfectly. Could not have gone better! Five stars.
by: CJ07/10/2021
Simple install. Well made and reliable axle.
by: Paul 08/20/2018
Axle was a perfect fit for my trailer
by: Richard03/20/2020
Fit was perfect, made for an easy replacement/ upgrade
by: Mark 04/12/2021
Mark
4/13/2022
Been working great. Have no dought on dexter axles. Have always had great service.
by: Jack07/15/2021
Great product but inventory issues most likely caused by the pandemic slowed shipping.
by: Robert 09/12/2022
by: Victor 09/21/2023
by: Calvin05/24/2021
by: Marshall 04/16/2021
by: Larry 04/01/2021
by: Bob07/03/2023
by: Blake 10/25/2022
by: Charles 08/22/2022
by: Matt 11/17/2022
by: William 12/22/2021
by: Carl09/02/2020
After years of hauling firewood my Harbor Freight Trailer Axle fatigued and cracked. The Dexter Axle from etrailer got me back on the trail. Welded leaf spring seats on the opposite side of the axle at a spacing of 46.5 inches. The wheels stick out an additional 3/4 inch per side. The trailer now rides like a Cadillac. Very excited about putting my faithful trailer back in service, with a serious axle underneath that I have confidence in. The folks at etrailer very helpful and responsive. Thanks
25
356
Show More Reviews
See what our Experts say about this Dexter Trailer Axles
- What Are The Wires For In The Axle Tube Of Dexter Trailer Axle w/ Idler Hubs # 7359765-I?The wires in the Dexter Trailer Axle w/ Idler Hubs # 7359765-I allow you to add electric trailer brakes at a later date if needed.
view full answer... - How to Determine Trailer Axle Hub Face to Hub Face MeasurementTo get the hub face to hub face dimensions on your Magic Jack trailer axle you'll want to put the trailer on jack stands so that you can take the wheels off and then measure from one hub face to the other hub face. I have linked a diagram below to show you exactly where to measure. The closest we are going to have to 101" is going to 95" like the Dexter Trailer Axle w/ Idler Hubs item # 7359765-I you were looking at.
view full answer...
- Replacement 3,500 Lb Dexter Axle D4518710I spoke to my contact at Dexter Axle and was able to determine that you have a 3,500 lb axle with 80" spring center and 94" hub face measurement which means the correct replacement for you will be the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. If you have idler hubs and you would like to replace these as well then you can use the Dexter Trailer Axle w/ Idler Hubs part # 7359765-I or if you have hubs/drums and you would again like to replace these as well then you can...
view full answer... - Replacement 3,500 Lb Axle for 1997 Lamar Trailer 16 Foot LongThank you for these measurements! I would have to concur with you that your best option would be to replace the entire axle. It sounds like you have two 3,500 lb axles with a hub face close to 95" end to end. The hub face is measured from the outer edge of each hub where the wheel would sit (see photo). I recommend you take a look at the Dexter Trailer Axle w/ Electric Brakes part # 7359765-EB which has a hub face to hub face measurement of 95" and a spring center to spring center measurement...
view full answer...
- Compatible Axle with Spring Center Measurement of 82 InchesThe Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs # 7359765-I can work for you if you weld on new spring seats # TRSS238 in the correct location for your application. You will need to remove the current mounts and add the new ones ensuring they are aligned. Then once welded make sure to use a primer and sealer and paint to protect from corrosion.
view full answer... - Can New Spring Seats be Welded to 95 Inch Trailer AxleYes, you can weld on new spring seats for a 95 inch trailer axle since there are none with the measurements you need. For the Dexter Trailer Axle with Idler Hubs # 7359765-I you can use the Spring Seat # TRSS238. I have added links to video reviews for you to check out as well.
view full answer... - 1/2 X 13 Threads Per Inch Vintage Trailer Wheel BoltsI reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect you would have to look for a rare bolt seller who would have this vintage style bolt. Brand new old stock would be the way to go as I would not trust used wheel bolts. If all else fails, another option is to replace with a modern axle and hub...
view full answer...
- Replacement Axle With 87 Inch Flange to Flange DistanceFor the proper length axle, you'll need to obtain the hub face to hub face distance. We offer 3500 lb axles with both 89 and 95 inch hub face to hub face dimensions. The Dexter # 35545I-EZ-89 3500 lb axle you'd looked at has a flange to flange distance of 82-5/8 inches, which is bit short of the 87 inch length you mentioned but the # 7359765-I would have a flange to flange distance of about 88-5/8 inches which would be closer to the 87 inches you mentioned. This axle includes the idler...
view full answer... - Is There a 3,500 Lb Trailer Axle That Measures 8-1/2 Foot WideI do have an option for you but none of our standard axles tubes measure 8-1/2' long. The longest we offer is 95" long from hub face to hub face, the Dexter Trailer Axle Beam part # 7359765-I. The only option we have for you if you need a longer axle tube would be to switch to an axle-less system, the Timbren Axle-Less Trailer Suspension System part # A35RS545. Please note, axles are not measured end to end but rather hub face to hub face.
view full answer...
- How To Position the Wheels/Tires On a Camper Outside the BodyThe trailer axle you were gifted would not be sufficient to position the wheels/tires outside of the camper body because once you subtract the width of the camper from the hub face length on the axle, you will still need to have enough room on each side for both half the width of the wheel/tire and clearance between the wheel/tire and trailer which will need to be around 1-2". In order to position the wheel/tires outside of the trailer you would need to have a hub face measurement that...
view full answer... - Mounting Dexter 3,500LB Underslung Axle Below Leaf Springs Rather Than On TopThe Dexter Trailer Axle w/ Idler Hubs # 7359765-I has an underslung design so that they will mount on top of the leaf springs. The arch in the axle needs to rise in the center of the axle as this will allow for better ground clearance as well as ensure the axle carries the trailer weight properly. The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 will allow you to position the axle under your leaf springs to gain the additional trailer height you are wanting. These will...
view full answer... - Correct Round U-Bolts for 3,500 Lb Dexter Trailer AxleWe do sell round u-bolts used to secure leaf springs to the axle, the correct ones for you will be based on the size of the axle. The Dexter Trailer Axle part # 7359765-I for example has a 3,500 lb weight capacity so it is 2-3/8" diameter and a compatible u-bolt kit for this is the Round Trailer U-Bolts part # SP01-040 or part # APUBR-1 if you need the tie plates as well.
view full answer... - How To Choose the Correct Axle Hub Face Length When Building a TrailerGenerally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the Dexter 3,500 Lb Trailer Axle Beams part # 35545I-EZ-89 for a 89" hub face and 74" spring center or part # 7359765-I for a 95" hub face and 80" spring center. Then for leaf springs and hangers, you could go with the Single-Axle Trailer Hanger Kit part...
view full answer... - Replacement Axle Needed for 3,500 lb Dexter AxleThank you for the information! According to my contact at Dexter Axle you have a 3,500 lb axle with a hub-face measurement of 96.60". We have the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765 which has a hub-face measurement of 95" but you'll need to check and see if the spring-center measurement of 80" will work for your trailer (see attached photo). If not you can have a qualified welder cut off and weld on new spring seats with part # TRSS238. This axle is also available...
view full answer...
- Parts Needed To Replace Torsion Axles On Tandem Axle Boat Trailer With Leaf Spring AxlesI recommend checking out the Timbren Silent Ride Suspension # TSR7000T04 for your 2016 EZ Loader trailer. This will allow you to bolt the suspension to the trailer rather than having to have frame hangers welded on. It also uses a rubber spring suspension system which is more progressive than steel and will help reduce bouncing much better. You will be able to attach 2 Straight Axles # 7359765-I or 4" Drop Axles # 7685269-I with idler hubs. I do recommend checking your local laws for trailer...
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jesse
6/8/2023
No problems after a year of hauling atv’s and lawn equipment. I would recommend this axle if you are looking for a replacement.