Replacement Axle With 87 Inch Flange to Flange Distance
Question:
I need to replace both of my axles, I can use 87 inch flange to flange, my springs are 671/2 c to c do you have any 3500lb axles that will work. I dont need drums or backing plates. I can move the perches if needed. What is the cost with shipping to 58078
asked by: Carl M
Expert Reply:
For the proper length axle, you'll need to obtain the hub face to hub face distance. We offer 3500 lb axles with both 89 and 95 inch hub face to hub face dimensions.
The Dexter # 35545I-EZ-89 3500 lb axle you'd looked at has a flange to flange distance of 82-5/8 inches, which is bit short of the 87 inch length you mentioned but the # 7359765-I would have a flange to flange distance of about 88-5/8 inches which would be closer to the 87 inches you mentioned. This axle includes the idler hubs with a 5 on 4-1/2 inch bolt pattern, the bearings, races, seals, grease caps and lug nuts as well as the grease.
As you stated, the spring perches or seats could indeed be replaced using part # TRSS238, which are sold individually.
For shipping rates, input your zip code in the field on the linked product page and click 'check zip code' which will get you the available shipping costs/times.
Products Referenced in This Question
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: How to Measure a Trailer Axle
- Shop: Single Axle Trailer Fender for Boat Trailers - Cold Rolled Steel - 14" Wheels - Qty 1
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Shop: InfiniteRule Hitch Lock for Gen-Y Gooseneck Coupler w/ 4" Round Tube - Stainless Steel
- Shop: Replacement Single Axle Trailer Fender for White River Marine Trailers - Stainless Steel - Qty 1
- Shop: Single Axle Trailer Fender for Boat Trailers - Steel - 14" to 15" Wheels - Qty 1
- Search Results: boat trailer fender
- Shop: Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand - 7,200 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 7,200-lb Axles Manufactured After 1999 - 8 on 6-1/2
- Q&A: Looking For Replacement Trailer Axles With 70 Inch Spring Center and 85 Inch Hub Face Spacing
- Search Results: boat trailer fenders
- Q&A: Is Distance From Mounting Flange To Front Of Hub Between Idler And Brake Hubs On Axle-Less System
- Search Results: 7000 lb axle
- Q&A: How to Tell Left and Right Side of a New Dexter Axle without Taking Off the Hubs or Brakes
- Search Results: 5 on 45 hub
- Search Results: akebrk~35r
- Search Results: 5 on 45
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Q&A: Recommended B&W Tow & Stow Ball Mount For New Trucks
- Search Results: fender
- Video: CE Smith Trailer Fenders CE26098G-2 Review
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing - HP29FR
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Review of HE Parmer Trailer Fenders - Steel Fender with Backing for 13-14 Inch Wheels - HP79VR
- Shop: Gooseneck Hitch
- Article: Most Popular Wheel Bearings
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Article: How to Tell the Weight Rating of a Trailer Axle