How to Determine Trailer Axle Hub Face to Hub Face Measurement
Question:
I got a 82 inch spring center not sure how to measure w tires on pwc trailer but i guessed 101 what axel can i use im replacing leaf springs on a 2005 magic jack dual pwc galvanized trailer
asked by: Max
Expert Reply:
To get the hub face to hub face dimensions on your Magic Jack trailer axle you'll want to put the trailer on jack stands so that you can take the wheels off and then measure from one hub face to the other hub face.
I have linked a diagram below to show you exactly where to measure.
The closest we are going to have to 101" is going to 95" like the Dexter Trailer Axle w/ Idler Hubs item # 7359765-I you were looking at.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Replacement 3,500 Lb Dexter Axle D4518710
- Q&A: Choosing Between Dexter Axle and Axle-Tech Replacement Brakes for a 2009 Palomino Pony Pop-Up
- Q&A: How Do You Know When Trailer Brake Pads/Drums Need to Be Replaced
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: How to Determine What Size Replacement Trailer Grease Seals Are Needed?
- Q&A: Availability of 3,500 lb Dexter Axle without Hubs thats 95 inches Long
- Q&A: Does it Matter if You Have Brakes or Idler Hubs When Measuring Hub Face on Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle