This heavy-duty steel D-ring creates a stable tie-down point in your trailer or truck bed. Includes a weld-on mounting bracket. Maximum load is 46,760 lbs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part #C83770. This is the CURT heavy-duty D-ring tie down anchor. It's connecting a stable tie-down port where trailer or truck bed . making it great when to comes to providing a attachment point for securing ropes, straps or bungees. The mounting bracket is included. This is a wall-bound installation. Everything that you see here is made from a forged steel construction with a nice raw-steel finish.
The maximum load of brake-strength for this unit is going to be 46,760 pounds. When it comes to the dimensions of just the ring, measuring outer edge to outer edge, that's going to give us a measurement of about 5 inches. And then measuring this direction, outer edge to outer edge is also about 5 inches. The thickness of the ring is going to measure 1 inch thick. When it comes to the bracket dimensions, measuring this direction, outer edge to outer edge, it's going to give us a measurement of about 2 and 1/4 of an inch. This direction, outer edge to outer edge, is about 2 and 1/8 of an inch.
And measure it from the bottom to the top, that's going to measure about 1 and 3/4 of an inch. When it comes to the opening of the D-ring, inside edge to inside edge, going in this direction is about 2 and 7/8 of an inch. Then with the bracket on there, measuring from the top of the bracket to the bottom of the ring, that measurement's going to be about 2 and 5/16 of an inch. This is your welding piece, so once this is welded on, you can see that it will allow the D-ring to rotate to either side. That way, when it's not being used, it can lay flat to free up some space. If you're hauling other gear, you don't have to worry about this getting in the way. That's going to do it for today's review of part #C83770. This is the CURT heavy-duty D-ring tie down anchor.
.
Average Customer Rating: 4.8 out of 5 stars (4 Customer Reviews)
This heavy-duty steel D-ring creates a stable tie-down point in your trailer or truck bed. Includes a weld-on mounting bracket. Maximum load is 46,760 lbs.bought these D-rings for my equipment trailer. they are great. Welded them on and i use the trailer nearly everyday.
The strength of these is impressive
Processed/delivered fast, package arrived in new condition!
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.