bing tracking image
  1. Tie Down Anchors
  2. Brophy
  3. Stake Pocket Anchor
  4. Stake Pockets
  5. 5000 lbs
  6. Trailer Tie-Down Anchors
  7. Truck Tie-Down Anchors
Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs

Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs

Item # T55Z
Our Price: $29.72
Tie Down Anchors
Shipping Weight: 2 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load. Great Prices for the best tie down anchors from Brophy. Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs part number T55Z can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (15)
  • Q & A (0)
  • Videos (2)
  • Photos

Brophy Tie Down Anchors - T55Z

  • Stake Pocket Anchor
  • Stake Pockets
  • 5000 lbs
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • Brophy

Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.


Features:

  • Stake pocket anchor provides a tie-down point in your flatbed truck or trailer
  • Movable anchor slides into a standard 2x4 stake pocket
    • Can be easily removed and reinstalled as needed
    • Secures in place with included pin and clip
  • D-ring is hinged, which allows straps to be attached from different angles
  • Zinc-coated steel offers excellent corrosion resistance
  • Made in the USA


Specs:

  • Safe working load limit (WLL): 1,600 lbs
  • Maximum load (break strength): 5,000 lbs
  • Inner diameter of D-ring: 2"
  • Anchor dimensions:
    • 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor
    • 3-1/2" Wide
    • 4-1/4" From the bottom of the mounting plate to the top of the pin hole
  • Top plate dimensions: 3-1/2" long x 2" wide
  • Pin diameter: 1/2"
  • Quantity: 1 stake pocket tie-down
  • 1-Year warranty


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.


Brophy stake pocket tie-down dimensions

Brophy stake pocket tie-down dimensions


T55Z Brophy 3-1/2 Inch Anchor for Two-by-Four Trailer Stake Pockets - Zinc - 5,000 Pounds





Video of Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy Zinc Stake Pocket Tie-Down Anchor Review

What's up, everybody It's AJ with etrailer.com. Today we're gonna be checking out these Brophy Stake Pocket D-ring accessories. So it's gonna go in your standard 2 x 4 sized stake pocket and give you an attachment point for your snap hooks. Let's check it out. The accessory here is gonna be 3 1/2" wide and 5 1/4" tall so this gives you a better idea if they're gonna work with your stake pocket or not, and we got a pin and clip at the bottom holding it in place. Now looking at the D-ring, it's gonna have a 2" diameter here so that's letting you know what kind of hook is gonna fit here to attach to it.

Also, it's gonna have a safe working load limit of 1,600 pounds and then a break strength of 5,000 pounds, so just keep that in mind when you have things tied down and hauling down the road. Something else to consider when you're strapping down your cargo is you wanna go by the lowest common denominator, so if this has a safe working load limit of 1,600 pounds. We wanna go by that. Even if your straps are rated higher, you wanna go buy this 'cause it's gonna be the tie down point. It's gonna be really easy to set up.

You just slide down in the stake pocket, got your pin and clip that goes through the bottom. Pin both holes. Then we will put the clip on there. That's gonna keep it in place. Now it does look and loose right now and that's before we tighten down our straps.

I'll put our snap hook on there. As I tighten it down, it's gonna pull it up into place and it'll be way more sturdy. So now we'll pull our strap tight, (ratchet clicking) ratchet a little bit tighter. (ratchet clicking) And we're good. Now these stake pocket tie downs are gonna come in quantity of one, so if you wanna do the setup we have today, you can get four of these, drop 'em in the stake pockets 'cause we always recommend two straps for whatever you're tying down, so this is gonna be a good way to not have to buy new ratchet straps.

We got the snap book ones, we already used those on another trailer. We can still use our stake pockets here. Now this one's gonna be silver and have a zinc coating so you don't have to worry about leaving it out in the elements. It's not gonna rust or corrode. Overall, I think these are a great accessory to have, especially if you already have these straps, you don't wanna buy new ratchet straps for the trailer and you wanna still use the stake pockets all the way down there, really easy to swap out and move wherever you need it for whatever cargo you're hauling. Well, I think that does it. Thanks for hanging out and hope this helped.

Customer Satisfaction Score:


Customer Reviews

Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs - T55Z

Average Customer Rating:  4.9 out of 5 stars   (15 Customer Reviews)

Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.

by:

Does the job nicely. But it would be good to have a second pin hole about an inch above the existing one. Then the assembly would not slip upwards in shorter stake pockets that some trailers have.

This would require recalculating load rating.



by:

Fits the stake pocket on my aluminum Hillsboro flat bed. Better angle on a D-ring than just the rub rails.
A little wobbly n noisy so I coated the base with flex seal product. Also put a small pad lock in the cotter pin hole to prevent theft. Small enough to fit in a truck box or under the seat, and use when needed. Happy with the purchase. Need 2 more now that I know they fit!



by:

These were just what I was looking for, I didn't want to cut up my trailer bed or grind and weld on my frame. They make it much easier to tie down anything and there moveable.



by:

great product, only issue was the fit steak pockets were jus a hair smaller than the tie downs, couple of passes with grinder and the problem was solved!!



by:

Solidly built. Perfect fit. Would highly recommend. Axle straps are decent quality for the price.



by:

I bought & use 10 of these on my car hauler when needing to strap items down for hauling when not hauling a car. They work very well.



by:

Fast, Efficient service. Items constructed well.

Bill K.

7/20/2017

Working Great. use the daily



by:

I really love this. Works great on any of my 3 trailers.



by:

Fits my rail pockets perfectly.

Gabriel R.

10/2/2017

Working great. Dont always have a need for them, but when I do, Im glad I bought them.



by:

I like them very much. Good product.



by:



by:



by:

good



by:



by:


15
15

See what our Experts say about this Brophy Tie Down Anchors


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Rick G
Video by:
Rick G
Employee Amy B
Written by:
Amy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924