This standard-duty, forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing cars, ATVs, riding mowers, and other heavy cargo.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the CargoSmart weld-on forged D-ring tie down anchor. This has a 5000 pound working load limit. Now this forged D-ring will add an extra anchor point for your trailer, truck, or van. It's a heavy duty steel construction, and as you can see, it is a weld-on installation. It is for a quantity of one. The anchor point diameter is gonna be right at five-eighths of an inch.
Now, the measurement of the horizontal inside diameter of this ring is gonna be right at three inches, and the vertical inside diameter of the ring is also right at three inches.Safe working load limit on this is 5000 pounds. Maximum load or braking strength on this is 15000 pounds. Now, one note I do want to mention is on tie down anchors, they must be chosen according to their safe working load limit, because the weight of the secured cargo must not exceed the combined working load limit of the anchors being used. So for example, if you're using anchors with a working load limit of 100 pounds each to tie down a load weighing 400 pounds, then you're gonna need at least four of those anchors to safely secure that load, and it is recommended that you always use anchors in pairs.But that should do it for the review on the CargoSmart weld-on forged D-ring tie down anchor with the 5000 pound working load limit.
Average Customer Rating: 4.8 out of 5 stars (9 Customer Reviews)
This standard-duty, forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing cars, ATVs, riding mowers, and other heavy cargo.Welded onto front of Polaris Ranger to serve as an anchor point for double line winching. These D rings do exactly as I had hoped.
I think this D ring will work good for me. I've used them before, that's why I ordered more of them.
Use on all goose trailers
will make securing my loads easier
Well made and tough. I welded it onto my WR Long 4n1 bucket and it works great.
Heavy duty and easy to weld.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.