BullRing Stake Pocket D-Rings - Angled - Retractable - Flush Mount - Qty 2

Video Transcript for Review of BullRing Truck Bed Tie Downs - Flush Angled Retractable Anchor For Stake Pocket - BU47FR

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a look at these BullRing flush angled retractable tie-down anchors for your truck bed stake pockets. These heavy duty anchors are going to attach to your truck bed stake pockets and provide tie-down points to secure your load. And they're gonna work with your S-hook and J-hook connections. And these are custom-fit anchors that are designed to fit the 2015 and newer Ford F-150 Regular Cab, Super Cab, and SuperCrew Cab, and the 2017 and newer Ford F-150 Raptor SuperCrew Cab. To confirm that these are gonna work for your truck, take advantage of our vehicle fit guide here at etrailer.com and input the year, make, and model of your truck.

And our fit guide will let you know if these will work for you, or if we have something comparable that will work for you. Now while the factory anchor points are inside your truck bed, where it can be hard to reach, these retractable anchor points are going to install into the stake pockets on top of your bed rails. And these are gonna be very easy to use once you have them installed. You are simply going to pop the anchor ring up when you want to use it to secure a load, and then when you're done with the ring and you don't need it anymore, you just simply hit it down. And it's going to go back down into the anchor itself and it's gonna sit flush and be completely out of your way.

So again, very simple to use. Let me show that to you again. Just pull the ring up firmly until it snaps or pops. And you can hear that. And again, this is going to stay securely in place while you use it, securing your strap to it.

It's not gonna slide down accidentally. It's gonna stay in position for the entire time that you need it. And then when you're done and you want that ring out of your way, just push it down and it is out of your way. So very easy to use, very convenient to use the anchored, the angled anchor ring is going to give you a better pull angle and more strength. And that flush fit is compatible with most of your tonneau covers.

Now these anchors have a weight capacity of 1000 pounds and they're constructed of stainless steel, so that's going to resist rust and corrosion and the nylon lower body is going to reduce sound. That top cover is going to match the grain and color of your Ford bed rails, giving you a nice factory look. Now installation is going to be very easy and, I think, pretty quick for you, and really this requires nothing more than your Phillips screwdriver. And to install these, you're just going to remove any plastic cap that is currently covering your stake pocket. And then you're gonna use a Phillips screwdriver and loosen the screw here that's at the top of the anchor, that goes through the top cover here. And for our purposes, I went ahead and loosened to this before our time together. So I'm gonna go ahead and just remove this screw and then you're going to take a hold of the top cover. And as you can see, when you remove that screw, this is going to allow this steel plate to drop down and that's what you want. And this is going to remain attached to the ring itself. So you're not gonna have to worry about dropping this plate and bracket into your stake pocket. It will stay firmly attached to your ring. And then while you're holding this cover, you're going to guide the anchor into your stake pocket. You'll probably have to position this at an angle to get that into the pocket. And then once it's in the pocket, you are going to pull up and you wanna catch this lower bracket on your truck's sheet metal. And once that has caught, then you're just going to hold onto the ring and allow the cover to drop into place. And then just go ahead and reinsert the screw and tighten it down. And all you have to do is hand-tighten these with your screwdriver. You wanna be sure that you do not over-tighten. If the plastic rail cap on your truck is starting to bend or bow, that's an indication that you are over-tightening. So you don't want to do that. You are gonna get two tie-downs and they do have a lifetime warranty. And all in all, I think these are really great anchors. They're gonna be very easy to use when you need them. You just pull it up firmly. It's going to secure, be securely in place. Then when you don't need 'em anymore, just push it down firmly and it's out of your way. And these are very well built. They feel very robust, very rugged, and I'm even more impressed with the ease of installation. These are gonna be very easy and that's gonna take virtually no time to install these in your stake pockets. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..