Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. WLL is 265 lbs.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Brophy d ring tie down anchor with backing plate and hardware, part number RR8K. This sturdy d ring creates a stable tie down point for your truck bed or trailer. The beveled edge won't interfere with your wheel cargo the included backing plate allows it to have a two hundred and sixty-five pound safe working load limit and eight hundred pound break strength. It features an inch and a half opening on our d ring so we have plenty of room to run our straps through. It's made out of a sturdy steel construction with a zinc plating so it's going to resist rust and corrosion. It's perfect for securing rope, bungee cords or even ratchet straps, all of which are available right here at etrailer.com. Now that we've got all the features, I'll go ahead and show you how to get it installed. We've got two holes drilled out.
Let's go ahead and set it in place. We'll just take our hardware and put it through. Then we can go underneath and attach our backing plate. We're bringing our backing plate, we're going to use the two holes that match up with our bolts. Then we'll bring in a lock washer and bring in one of the nuts, get that started. Then, without holding it in place, do the same for the other side.
Then we can tighten it down. Now, on tightening it down, it's not a bad idea to get an extra set of hands to hold the bolt in place on top. Looks like our anchor point is secure. Let's go ahead and tie down our cargo. That's going to complete our look with the Brophy d ring tie down anchor with backing plate and hardware, party number RR8K.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. WLL is 265 lbs.Installed on 2002 Triton XT-10 open placed trailer. Just replaced the decking and needed some upgraded tie downs. Decided upon these after much research and liked the idea of the surface mount to tie down for my 2 ATV's. Hardware appears to be heavy duty. It was well packed, all parts in tact and easy assembly. The plates provide good re-enforcement and prevent the bolts from driving thru the new decking. Just installed a few days ago. Have not had a chance to use them yet, but so far impressed with the product.
I have ordered several items from etrailer and will continue to do so as needed the staff is very helpful Thanks etrailer
Was looking for an anchor tie down that was flush on the trailer and easy to put on. Didn’t need anything super heavy duty works perfectly.
These work great. Very secure. Highly recommend!!!
Fast shipping and customer service is e xcellent!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bryan H.
9/21/2015
Worked so well I bought another one for my new trailer.