Flow Through Tire Sensors for TST TPMS - Qty 2
(91 reviews)
Price: $106.00
In Stock
Flow Through Tire Sensors for TST TPMS - Qty 2
Item # TST-507-FT-S2
Retail:$124.00
Our Price: $106.00
You Save: $18.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (91)
- Q & A (0)
- Photos
TST Accessories and Parts - TST-507-FT-S2
- TPMS Sensor
- Tire Pressure Monitor Parts
- Sensors
- TST
Flow through sensors for your TST TPMS let you inflate or deflate your tires without removing them from the valve stems. Use them to monitor 2 additional tires, to replace damaged or lost sensors, or to upgrade from sensors that require removal.
Features:
- Flow through sensors for your TST tire pressure monitoring system let you inflate or deflate your tires without removing the sensors
- Allow you to monitor 2 additional tires or replace lost or damaged sensors
- Work with TST-507-FT-4-C and TST-507-FT-6-C
- Can also be used to upgrade TST-507-RV-6-C and TST-507-RV-4-C
- Brass construction designed for use on metal valve stems only
- Works with steel, chrome, or nickel valve stems
- Easy installation onto your tires' valve stems with included wrench and locking hex nuts
- Included replacement hardware may be required when changing batteries
- 2 O-rings and 2 washers help maintain internal waterproof integrity
- 5 Screws hold sensor body together
- Included standard CR2032 battery can easily be found at your local store once you need to replace it
Specs:
- Dimensions (each): 1" diameter x 15/16" tall x 1-11/16" long
- Sensor Weight: 1 oz.
- Pressure range: 1 psi - 218 psi
- Operating frequency: 433.92 MHz
- Operating temperature range: -40 F - 176 F (-40 C - 80 C)
- Storage temperature range: -40 F - 185 F (-40 C - 85 C)
- Battery life: 1 year - 1-1/2 years
- Quantity: 2 tire sensors
- 3-Year limited warranty
Tire Sensor Installation
- Screw the anti-theft hex nut onto your tire's valve stem threads until it bottoms out.
- Screw the sensor onto the valve stem. Tighten the sensor until the air stops leaking and the sensor bottoms out on the valve stem. Give it a slight twist to seat the sensor while being careful not to over-tighten.
- Use the included wrench to tighten the hex nut counterclockwise until it is snug against the sensor.
- Screw the tire's valve cap onto the sensor.
TST-507-FT-S2 507 Series Flow Through Transmitters for Truck System Technologies Tire Pressure Monitoring Systems - Qty 2
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Flow Through Tire Sensors for TST TPMS - Qty 2 - TST-507-FT-S2
Average Customer Rating: 4.8 out of 5 stars (91 Customer Reviews)
Flow through sensors for your TST TPMS let you inflate or deflate your tires without removing them from the valve stems. Use them to monitor 2 additional tires, to replace damaged or lost sensors, or to upgrade from sensors that require removal.by: Patrick 08/26/2022
Saw these on YouTube and knew the necessity as my brother, a long-haul truck driver and 5th wheel RVer, says TPMS is a MUST. I have 6 wheels on my 5th wheel and just got 6 new Michelins on the pickup. I now have my pickup, 5th wheel, flatbed, and all of their spare tires monitored. Peace of mind is a wonderful thing when going across Wyoming at 80mph in 100 degree heat.
(Update) 70K miles in 8 months and this TPMS system is spot on. Thank you to etrailer.com for getting the correct sensors for my system in a fast and efficient manner. Great service at a great price. Very happy with my purchase.
by: Michael10/22/2023
I've used the Roadmaster Hitch Mounted Spare Tire Carrier for the last year (2023) and have put over 7500 miles on it. The carrier has performed seamlessly and is still manageable when mounted 40 plus inches off the ground. I have it attached to a Torklift 5' extension that goes into a 3" receiver welded into my flatbed. To prevent bouncing I've had Torklift put in a support bracket from the lower(regular) receiver. No bounce!
by: Sean11/30/2023
Does exactly what it needs to do. There was an issue with the hubcap opening not allowing installation. Had to use valvestem extensions to facilitate installation.
by: Bruce 02/03/2024
Matches sensors received in a recently purchased tire monitoring system.
by: Gave up05/30/2023
Needs metal valve stems which etrailer representative says the do not sell. They are listed on their web site. After getting nowhere with etrailer representative decided to return these flow sensors. Not worth the hassle.
Jenny N.
6/13/2023
I apologize for any miscommunication that happened. Part # AM20906 will work together with part # TST-507-FT-S2. You just have to make sure your tire is one that is rated for a PSI that is over 100. The rim would need to have valve stem holes that are 0.453 or 0.625 inches in diameter.
by: James06/10/2023
The weight of these add-on sensors flexed the valve stems on all four trailer wheels. Two of the four went flat during the trip. The other two I could pull the core out after we got home. The flexing caused heat in the rubber parts and disconnected the inter mail tube from the rubber. There should be a “steel stem only” notice on the product listing.
by: Cheryl 07/12/2023
I purchased this a year ago and finally installed the system prior to a long trip with my camper. Once paired the system gave us an additional sense of security as we traveled. Great product.
by: Greg04/01/2023
I purchased 6 tst internal sensors for our RV with the color monitor. I also purchased 4 flow-through monitors for our jeep, which we tow. The products are awesome and saved us from destroying tires on the RV. On RV’s with dual tires in the back, the inside tires get extremely hot in high summer time temperatures. The sensors taught us not to drive when ambient temperatures are 95 or higher. We have read where numerous RV’ers have had catastrophic blowouts on inside dual tires and our tst sensors allow us to avoid those dangerous situations. We absolutely feel the product should be installed on all R’s and trailers.
by: Brad 12/19/2021
Would not be without a TPMS on my RV. This system has worked flawlessly. As a reminder, make sure you replace the rubber valve stems in your wheels with metal ones before installing these sensors.
Brad
12/26/2022
One year later and could not be happier. We are full time on the road in our RV and depend on this system to alert us if we have a tire going down before we see the smoke and damage in the rear-view mirror. Over 5 years on the road, we have lost some tires, but none sense we installed this system.
by: Albert 04/03/2023
I have a 7 year old TST TPMS that had a misbehaving sensor. Advice from TST was to replace the sensor. eTrailer offered the sensors at a reasonable price, had them in stock and offered free shipping. The 2 sensors arrived earlier than originally estimated. Sensors have been installed and all is well in TPMS on my MH.
by: Garry 11/14/2021
They work great, gives tire pressure and temp. I have had the TST system for about 6 years now and the only reason I needed to replace these were due to the tire company putting them on too tight and broke them.
Garry H.
11/15/2022
Great, perform flawless, remove them yourself if needing tire work done, destroyed 2 of them with excessive tightening.
by: Robert10/28/2022
Warned me of a double blowout on my triple axle boat trailer so I could get off the Florida Turnpike as soon and safely as possible without destroying the rims or damage the trailer and boat.
by: Brian 09/18/2022
Added 4 more sensors to our existing system and programmed them as a second trailer. 1000mi road trip next week, the system has saved us on our 5th wheel, and it will be nice to have piece of mind pulling our car trailer as well.
by: Thomas09/07/2022
The sensors provide valuable temperature and pressure information to the dash mounted display in a five second alternating pattern. That makes it easy to read the information without distraction.
by: Scott 11/12/2022
Always get prompt and accurate service. etrailer keeps me informed regarding my order with emails and a direct contact should I have any questions. Thanks as always for great service.
by: Ken06/12/2021
The TPMS for TST is overall very good. I have had the primary system for 5-6 years and it has always preformed well. However in the past year I have had 3 sensors quit working. I changed the batteries, moved them to different tire locations, even reprogramed them. The only thing that worked is replacing them. At $50 each its expensive. That makes my replacement half of all sensors on the RV. 6 in total and replaced 3. I am not unhappy but more irritated.
I also started with the black screen and upgraded to the color screen when it came out. I have sense gone back to the black screen. I cannot see the numbers being reported. I see that there is now a shield for the screen glare so I have ordered that from the company. So we shall see. Would I buy this system again? Probably not as I think the technology has improved and I am not sure where TST measures in.
by: John 11/11/2020
Great system! I would recommend this to anyone who is towing a RV or trailer. It does a great job monitoring pressure as well as tire temperature. Should not be towing without monitoring your tires pressure and temperature. A happy user!
by: Charlie07/19/2019
The only Tire monitor system to buy! we have them on our triple axle DVR Santa Fe and our M102 Freightliner tow vehicle.
Charlie
7/20/2020
Excellent
by: Burle05/25/2021
TST TPMS Flow Through Tire Sensors in my opinion are the best in the market place especially for rear duels on your coach. Easy to setup and maintain tire pressures. I have had this setup for a year. The TST display is second to none!!!!!!!!!!!!!
by: Walt G10/24/2021
Ordered these replacement sending units for the system on my motorhome. One of the existing senders went bad so now I have one as backup. Sending units had to be of the same brand of TST TPMS. Replacement was quick and easy although the locking system has changed.
by: Solomon05/06/2021
These are extras. I have been using these for several years. They work great.I only had one false alarm. Rebooted recieverand all was well.
Solomon
5/7/2022
All is working well.
by: David08/21/2020
Like the new sensor!. Had to replace an older (set screw) model that got damaged. New sensor coded up first try, installed easy. Very much appreciate the new locking nut versus the set screw. To be honest I never was able to tighten the old style set screws on all 6 wheels anyway. The locking nut and tool give an added sense of security. Just installed today, so no long term assessment yet.
As usual excellent service and turn time by etrailer!
by: Tod 07/09/2021
The TST tire sensors have saved our bacon on two separate occasions when we had a tire fail on our travel trailer. The big thing to remember for this product is the need for METAL valve stems. A definite must have piece of kit for on the road safety.
by: Doug06/17/2022
Installation, and configuration is straightforward. I did have one sensor leak, etrailer replaced it immediately. So far I'm happy with them.
by: Jeff 05/18/2023
Easy to use! Peace of mind on the highw ay.
25
91
Show More Reviews
See what our Experts say about this TST Accessories and Parts
- How to Monitor Tires on 2018 Ford F-250 with TST Tire Pressure Monitoring System for TrailerThe TPMS on your 2018 Ford F-250 are using their own system and it won't be compatible with the TST TPMS # TST-507-FT-4-C that you are using for your trailer. If you wanted to use the TST to monitor the tires on your F-250 as well then you'll need to install some TST sensors on your truck tires. You can either use more of the Flow Through Sensors # TST-507-FT-S2 (which comes with a quantity of 2 sensors) or you could mount the Internal Sensor # TST-507-INT-S1 on all 4 wheels but this option...
view full answer... - TST Tire Pressure Sensor with Color Display with 12 Total SensorsFor a TST TPMS system with a total of 12 sensors you'd need the part # TST-507-FT-6-C for the color display setup with 6 sensors and then you'd need a quantity of 3 of the part # TST-507-FT-S2 which is a pair of sensors. The prices are available at the links below.
view full answer... - Can I Change my TST TPMS Cap Sensors Over to Flow Through SensorsGreat News! We have the replacement Flow Through Tire Sensors for TST TPMS Systems part # TST-507-FT-S2. These will easily pair with your current TST monitor allowing you to monitor your pressures and also check them easily with the removable caps. These come as a 2 pack so just order the quantity you need. I have linked them as well as the instructions for pairing them if you do not still have the user's manual.
view full answer... - Recommended Tire Pressure Monitoring System for a Tandem Axle 5th Wheel Towed By a Dually TruckPersonally, I would go with the TireMinder A1AS TPMS # TM79FR. There are a couple reasons for this. One being that the TST TPMS for RVs # TST-507-FT-6-C (or any other TST system) would require you to purchase 4 additional sensors # TST-507-FT-S2 (x2) because your 2019 GMC Sierra 3500 is a dually. While the TireMinder A1AS TPMS # TM79FR comes with 10 sensors, which is enough to cover all 6 tires on your 3500 and the 4 on your Salem Hemisphere 5th wheel. The TireMinder A1AS TPMS # TM79FR...
view full answer... - Replacement Options For a TST TPMS Sensor with a Cracked CapWe do not have just the cap for TST TPMS sensors, and I am not aware of just the cap being available at all. For replacement options we have the Brass Tire Sensors for TST TPMS # TST-507-RV-S2 and the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2.
view full answer... - Replacement TST Flow Through Sensor for the TST 507 Series TPMSSorry to hear about that Jeff, we've all done it before! As far as a single replacement sensor, you're out of luck as TST only offers a 2 pack for a replacement # TST-507-FT-S2. It may-be better anyways that they're shipped in quantities of two just in case you break another in the future.
view full answer... - TST Tire Monitoring System With 12 Flow Through SensorsYou will need the TST TPMS for RVs # TST-507-FT-6-C which includes 6 of the flow through sensors. For the other 6 sensors you are needing we have the Flow Through Tire Sensors # TST-507-FT-S2 sold as a quantity of 2. Therefore you will need 3 sets of the additional sensors.
view full answer... - Will the TST-507-RV-6-C Work on an RV/Toad That is 68 ft Long Overall?I spoke with my contact over at Truck Systems about the TPMS for RVs # TST-507-RV-6-C and those TPMS sensors will work for your RV, but he mentioned that you would likely want to use the system that has the Flow-Through caps instead, which can be found with part # TST-507-FT-6-C . This is the same exact system with the color monitor, but the caps will allow you to fill your tires without removing the TPMS caps if the need arises. Since there is not a pack of 12 sensors available, you'll...
view full answer... - Can I Use Metal Valve Stems with a TST TPMS System without Flow Through SensorsYou could use the Americana # AM20906 on your wheels, but your TPMS system is not designed for metal valve stems unfortunately; those sensors can only be used with the brass/rubber stems. If you wanted to switch to metal valve stems you would need the flow through sensors like the Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2. If you check out the end of that video these valve stems are installed on a similar wheel, and I've linked that video for you to check out.
view full answer... - Valve Stem Flow Through Sensors for Tire Pressure Management SystemThe Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2 comes with the nut that fits on the valve stem behind the sensor. This nut and the special wrench will allow you to tighten that nut to the sensor from the back to secure it to your valve stem for increased security. You are correct that the nut and wrench are on the input side of the sensor and not the output so I'll have that photo removed as it is incorrect.
view full answer... - Adding A Trailer Tire Pressure Monitoring System To An Existing Motorhome SystemThe # TST-507-FT-S2 will work though these cannot be used on rubber stems and you will have a higher chance of curbing because these stand out a bit. I did contact TST who recommended the Brass Tire Sensors for TST TPMS - Qty 4 # TST-507-RV-S4 as a better solution that addresses those concerns. Either will work for you but I wanted to make sure you're aware of your options. Included are review videos for your review.
view full answer... - Tire Pressure Monitor System that Can be Used on Triple Axle Trailer up to 100 PSIThe TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors # TST-507-FT-4-C is rated for up to 196 psi so it would work with the pressure ratings of both trailers you mentioned. To add more sensors you'd want the part # TST-507-FT-S2 for a pair. For a triple axle trailer you'd need the 4 sensors of the kit plus two additional sensors.
view full answer... - Using TPMS Flow Through Sensors And Valve Extenders On A 2024 Ford F-450 Hi John, TST Flow Through Sensors # TST-507-FT-S2 are approximately 2-1/8" long so they do add a bit to the overall length of the coming from the valve. TST likely told you that the sensor has to be directly after the valve to avoid any movement with the sensor that could damage it or the valve and to help prevent any false readings. With valve extenders like the Wheel Masters # WM8001-135 you'll be able to tuck the excess cable up since you'd be mounting the end of the extender to the...
view full answer... - Does Taskmaster ST235/75R15 Radial Off-Road Tire and Wheel Come with TST MonitorThe Taskmaster ST235/75R15 Radial Off-Road Tire w/ 15" Vesper Black Mod Wheel # TA65RR does not come with a TST monitor but you can have a tire shop install one for you. If you don't already have a TST sensor you can choose from the following: - Internal Sensor # TST-507-INT-S1 - Flow Through Sensor # TST-507-FT-S2 - Cap Sensor # TST-507-RV-S2
view full answer... - Flow Thru Sensors for TST TPMS and Replacement O-Rings and Hex NutsWe do have the parts available that you are needing for your TST 507 TPMS system. - Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 - Replacement Flow Through ST3 O-Ring and Hardware Kit with Screwdriver for TST TPMS Tire Sensors # TST74FR. This replacement kit will only work with the flow through sensors that are in the attached picture. If your current sensors look different there would be a different kit. If you can provide a picture of your current sensors, I would be happy...
view full answer...
- Recommended Metal Valve Stems Compatible With Internal TPMS Rod, you could use the low through sensors like the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 TST with the TPMS for RVs # TST-507-FT-4-C, which is compatible with metal valve stems.
view full answer... - TPMS System With 8 Flow Through Sensors and Signal BoosterTruck Systems Technologies (TST) doesn't offer a TPMS kit with 8 sensors, but you can get the 6 sensor system with the pass thru sensors and signal booster, part # TST-507-FT-6-C and then add two additional sensors using part # TST-507-FT-S2. If you click the provided link, you can see a product demonstration video of the # TST-507-FT-6-C TPMS system.
view full answer... - Which Flow Through Tire Sensors Are Compatible with the TST-507 SystemThe Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2 are the same sensors that come with the TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire Sensors # TST-507-FT-6-C, which is the same as your TST-507 system. These are only sold in packs of 2, so you would need 2 packs.
view full answer... - Can Flow Through And Standard TST TPMS Sensors Be Used Together The monitor from a 4 sensor system like the TST TPMS 507 for RVs # TST-507-RV-4-C will allow you to monitor up to 38 tires. You could use this system and some replacement flow through sensors # TST-507-FT-S2 to for the inner wheels.
view full answer... - TST TPMS Tire Pressure Sensor Setup with 10 Sensors that are Brass Valve CompatibleThe flow through sensors of the TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire Sensors # TST-507-FT-6-C have brass inserts already so you don't need additional inserts or sensors. So then to add 4 more sensors to the kit you'd just need two sets of the # TST-507-FT-S2 and you'd be set. We do have brass valve stems like the part # AM20906 as well.
view full answer... - Recommended TST TPMS System for 30 Foot Trailer and 2019 Chevrolet Silverado 2500 HDIf your 2019 Chevy Silverado 2500 HD Duramax already has a built in TPMS, I don't think you'd need to add the additional sensors to the TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors # TST-507-FT-4-C, but I would definitely consider it. The great thing about adding sensors to this system and not using your vehicle's monitor, is that you can monitor everything on one monitor, as opposed to two. The TST system has an easy to read monitor that can be setup...
view full answer...
- Can Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 Be On Boat Trailer and Back into WaterThe sensors that mount on the wheels of the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 that you referenced are water proof.
view full answer... - TPMS to Use with Wheel Masters Airless 4-Hose Inflation KitI reached out to my contact at TireMinder who said that their Smart TPMS # TPMS-APP-6 is only compatible with valve extensions if they are solid steel and not braided. Since the Wheel Masters Airless 4-Hose Inflation Kit # WM82082 uses braided hoses you'll need to use a different system. I reached out to my contact at TST who said that their sensors are compatible as long as the end of the valve is secured with a bracket like what comes with the Wheels Masters kit. Since this is the case...
view full answer... - Recommended TPMS for 18 WheelerThe TPMS I recommend for an 18 wheeler is the TST TPMS for RVs part # TST-507-FT-6-C because it has a range extender and uses flow-through sensors which are both things you will need. The range extender will be needed as 18 wheels are generally pretty long in overall length and the flow-through sensors are needed because most dual tire applications use valve stem extenders and you'll need to install the sensor between the wheel and extender in order to get the proper reading. For extra...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Installed by:
Jeff D
Installed by:
Kathleen M
Installed by:
Shane H
Installed by:
Adam E
Expert Research:
Jameson C
Video by:
Chris R
Written by:
Matthew S
Updated by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Patrick
8/27/2023
One year of safe travels with my TPMS system for my pickup, 5th wheel and flatbed trailer. Travel is so much more satisfying when I don’t have to stress about the tires.