Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Telescoping gravity fill inlet gives you a large opening to make it easier to refill your RV's holding or fresh-water tank. Slides in flush when not in use. Connects to your fresh-water tank with 1-3/8" or 1-1/4" barbs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Valterra Flush Mounted Telescoping Gravity Fill Water Inlet for RVs. This unit allows you to add or replace a gravity fill water inlet on your RV or camper. To open the unit and fill your fresh water tank, all you have to do is lift up on the latch, pull out, and simply pour in your water. When you're done, just close it and the latch snaps shut. The unit does feature appropriate seals internally for leak proof performance. It is a flush mount installation, so once it's installed, this is the only portion of the unit you'll be able to see.
It contains a total of four mount holes that are already drilled out. Mounting hardware is not included. These mount holes are separated on a square pattern, and they're separated on center by two and a half inches.A cutout is needed for the installation. This area right here has a diameter of around two and a half inches. The unit also has an air vent located right here.
This allows air to escape to keep pressure from building up inside the fresh water tank. That's a 3/8th inch connector for the air vent.Back here we have the barb inlet for connecting the RV plumbing to the gravity fill inlet. It starts out as a one and 3/8th inch barb inlet, and it increases to an inch and a quarter barbed inlet. Overall measurements. Going this direction, three and a half inches by three and a half inches.
It's made from a durable plastic construction that's black in color.That's going to do it for today's look at the Valterra Flush Mounted Telescoping Gravity Fill Water Inlet for RVs.
Average Customer Rating: 4.6 out of 5 stars (10 Customer Reviews)
Telescoping gravity fill inlet gives you a large opening to make it easier to refill your RV's holding or fresh-water tank. Slides in flush when not in use. Connects to your fresh-water tank with 1-3/8" or 1-1/4" barbs.E- trailer always exceeds my expectatio ns!
I haven't installed it yet but it seems like a good product comparable to any I've seen on RVs. Of course, customer service is always 5 star e-trailers.
Exactly what I needed for my tear drop camper build. Have yet to install, but I belive it will work perfectly.
Item as described, it fits the opening of the old water inlet. I have not hooked it up or used it, (cold weather) but I have made a garden hose filler for it where I can fill the fresh water tank with water pressure using this gravity filler product. No problems.
James
It leaks out of the bottom, so you waste quite a bit of water. When filling up in the desert, it's a noticeable puddle beneath your rig.
Aaron
8/23/2023
Working great!
Fit perfectly and looks great!
This was exactly what I needed And it fit as it should.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jw
3/15/2023
This inlet has worked very well. No leaks and helps to fill the tank with no problems.