Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Lug
(24 reviews)
Price: $72.21
In Stock
Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Lug
Item # T84B
Retail:$97.55
Our Price: $72.21
You Save: 26%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Waste Valves - T84B
- Double Waste Valve - Manual
- Sewer Elbow
- 3 Inch Spigot
- Valterra
- Rotating Valve
RV sewer elbow combines rotating black-water waste valves. 3" Spigots slide into 2 separate black-water lines. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose.
Features:
- RV sewer elbow combines (2) 3" waste valves
- Can be used as a replacement part or upgrade your existing setup
- Elbow merges the flow of waste from your black-water tanks
- Rotating valves offer easy access at mounting location
- Position valves at desired angle during installation
- 3" Spigots slide into your RV's black-water lines
- Bayonet-style cap covers lug fitting when not in use
- Integrated strap keeps cap connected to valves
- Durable black ABS plastic construction
- ABS solvent cement (sold separately) required for installation
- Black handles for easy identification of valves
This RV sewer elbow with rotating valves is a part of your motor home's waste management system. The elbow combines the flow of wastewater from your black-water tanks. And the valves can be rotated as desired during setup to make it easier to reach. Connect your sewer hose to the 3" lug fitting on the elbow and open the valves to drain your holding tanks.
T84B Valterra Motorhome Sewer Elbow w/ Double Rotating Valves - 3" Spigot x 3" Spigot x 3" Bayonet Cap
Video of Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Lug
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Sewer - Waste Valves - T84B Review
Today we're going to take a look at the Valterra RV Rotating Double Ell Waste Valve assembly. It has a 3-inch spigot end on each end and a 3-inch bayonet cap end. This is made of a durable hard plastic construction. It is designed for installation on a black water system. The double ell design if you look at it, basically the two tubes you can see form a double ell look to it. The bayonet end right here is designed for use with this included bayonet cap.
You can see the cap is tethered to the tube so you won't lost it or you can connect the drain hose to this bayonet fitting. A bayonet fitting has the 4 pins on the tube and then the cap or the drain hose whichever you use, will have hooks on it either 2 or 4, that you would just twist on there and it locks it and gives you a nice secure connection. Both of these waste valve bodies right here, they are a Bladex design and these are used to open or close the tube opening at each end. Just like that they're open or closed. What's nice about this .. Let me open both of them.
If you look through there it gives you a nice 3-inch diameter passage which will allow the waste to travel freely when they're open and then when you close it, the valves will tightly seal off the black water pipes when it's closed. Both of these valve bodies can be rotated on the pipe to fit your specific application. If you need to put the handle in a position where you can reach it, all you have to do is remove the 4 nuts and bolts, rotate the valve body to your desired position and then tighten it down. Both of these valve bodies have the metal valve shafts. You can see when I pull it out they have metal valve shafts and plastic end handles on each end. I do want to give you a few dimensions. The spigot ends which are on each end here, they have the same inside or internal diameter and that's going to be right at 3 inches.
On the bayonet cap end, we'll take the cap off. If I put a ruler in there, you can see they're going to be 3-inch inside diameter also. That should do it for the review on the Valterra RV Rotating Double Ell Waste Valve assembly, 3-inch spigot ends on each end and a bayonet cap end.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Lug - T84B
Average Customer Rating: 5.0 out of 5 stars (24 Customer Reviews)
RV sewer elbow combines rotating black-water waste valves. 3" Spigots slide into 2 separate black-water lines. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose.by: Rory09/16/2021
Installed it about 2 months ago, have not had any problems with it. Much needed upgrade on my '70s model Airstream, worked great in such a tight space, the only one I found that would fit. Also I really like doing business with etrailer, they always email you an update you on the status of your order, great customer service!
by: Grace 04/18/2023
I couldn't be happier with the quality and service of E Trailer on all my purchases. Easy to replace parts when you get the right parts!
by: Michael 08/10/2023
Worked as designed
by: Kirk10/15/2022
Ordered the part on 10/10 and it was scheduled to be delivered on 10/17. I was surprised that it actually came early on Saturday 10/15. The quality looks good and it was exactly as described. Good experience with etrailer!
by: Dani M05/30/2023
Just the item I need to replace a broken double valve. Good quality and the shipping was just right.
by: Denny01/06/2017
The exact replacement part for my motorhome. easy install.
by: Jeremiah 10/29/2022
The waste valve and elbow fit perfectly, etrailer always comes through. Thanks
by: Nick S.08/13/2017
We broke the original part five hours from home and no local shops had the part or could order in in less than three weeks. Gave etrailer a call and they set up shipping to the campground we we at in less than four days with expedited shipping. We received the part, better quality than the original and easy install. As a side note even with expedited shipping part was still cheaper than the local shops quoted me and they needed three weeks shipping time. Basically great part and amazing service.
by: Jennifer 04/24/2023
I put this one on. Haven't tested it yet. Was simple to put on.
by: Jacob J05/12/2017
Great product for by far the cheapest price with extremely fast shipping. Will give pics when installed on new camper. Thanks etrailer!
by: Mike03/09/2018
Perfectly matched replacement, good price, quick shipping, great communication. Would buy again
by: Charles08/18/2020
product worked well, A little smaller side to side than the orginal. Attached to one tank and added a piece of pipe to make other side fit. Worked fine. Haven't used since fixed but I am sure it will work fine.
by: Robert T08/17/2018
Great customer service! Vanessa was a true proffesenial!!! Thank You!!!
by: Cory H.11/12/2016
Great products at a good price and fast shipping!!
by: David09/29/2018
just what i was looking for Fast shipper
by: Tim04/21/2022
easy to use
by: Tracy R09/02/2017
well constructed
by: Martin04/26/2022
by: Jaime 07/22/2022
by: Shane 03/23/2021
by: Rick 08/15/2023
by: Lawrence 10/18/2022
by: Doug 01/24/2022
by: Robert 04/08/2021
24
24
See what our Experts say about this Valterra RV Waste Valves
- Recommended Double 3" Cable Actuated RV Waste Valves for Two Separate Black Water LinesIt sounds like you're looking for the Double RV Waste Valves # T84B which includes two 3" cable actuated spigots for two separate black water lines. If you're looking for something else feel free to come back and we'll take care of you.
view full answer... - Can the Exit Spout on the Double RV Waste Valves Part # T84B RotateYes, you can rotate the exit spout on the Double RV Waste Valves part # T84B just as you would the valves. However, in order to do this you are going to need to remove the four nuts and bolts on each side of the flange which over time is just going to create more leaks so I don't recommend it. It is also going to be very messy as you have to open the system up each time. If you are leaking out of the main spout then odds are the seals for the valves are not functioning properly and replacing...
view full answer... - Overall Width of Valterra Double RV Waste Valve # T84BThe Valterra Double RV Waste Valve, # T84B, has an overall measurement of 11-3/4" from edge to edge.
view full answer...
- What is the Difference Between Double RV Waste Valves # T84 and # T84BThe outlet tubes on Double RV Waste Valves # T84 are larger than those on Double RV Waste Valves # T84B. On the T84 the 3" Hubs slide OVER your RV's black-water lines. On the T84B the 3" Spigots slide INTO your RV's black-water lines. I have included links to videos on each.
view full answer... - Recommended Black Water Drains Transitioning To 4 Inch PVC PipeTo connect your RV to a 4 inch PVC pipe, I recommend the EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Clear # F02-3112CL. This adapter will transition from the standard 3 inch RV black water connections to the threaded 4 inch PVC. For your 3 inch connections, you may be interested in the Camco RV Sewer Hose Straight Adapters w/ Bayonet and Lug Fittings and Clamps # CAM39543. To get your two lines into one, you may want the RhinoFLEX RV Sewer Hose "Y" Fitting...
view full answer...
Do you have a question about this RV Waste Valve?
Info for this part was:
Expert Research:
Michael H
Installed by:
Jeff D
Written by:
Amy B
Updated by:
Cody B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Denny
1/14/2018
product is working as designed - no issues.