Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the waste valve from your RV's gray-water tank with this cable-actuated gate valve. 36" Cable lets you open and close the valve even if it's in a hard-to-reach place. Non-stick seals resist cracking. Installs on 1-1/2" pipe.
Features:
Specs:
This cable-actuated RV waste tank valve has a 36" long cable, allowing you to easily open and close the valve even when it is positioned in a hard-to-reach location. Simply install the valve between your RV's sewer pipes and mount the handle on the end of the cable in a convenient, easy-to-access place.
When you're ready to dump your gray-water tank, just pull the handle to open the valve. And when you're finished dumping, just push the handle back in to close the valve. No need to crawl under your RV to access the valve itself.
Before getting started on the installation, you'll want to empty your gray-water tank, then flush out the sewer pipes. This will help to ensure that your working environment is as clean as possible.
This waste valve is designed to replace your existing valve, which should have a hub end and a spigot end. After removing the old valve and flanges, lightly coat the outside of the new valve's spigot and the inside of its hub with ABS solvent cement (sold separately). Do the same with the open ends of your RV's sewer pipe. Then, insert the smaller spigot end of the valve into your 1-1/2" pipe, and slide the larger hub end over the pipe on the opposite side.
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
Replace the waste valve from your RV's gray-water tank with this cable-actuated gate valve. 36" Cable lets you open and close the valve even if it's in a hard-to-reach place. Non-stick seals resist cracking. Installs on 1-1/2" pipe.LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank - Spigot to Hub - 36" Cable fit perfect and corrected the problem I had with the original cable (corrosion of shaft).
This is the OEM drop in replacement for my 2017 Grand Design Imagine 2600rb trailer. It comes with fittings to glue onto your pipes; I removed and discarded them; the flanges on the trailers piping exactly match this valve. I did find the screws that come with it are too short. They are 10x24 x 1.5" long. You need at least 2" screws and 2.25" would be best. I tried replacing this valve (due to me damaging it) with the Valterra valve (less $$) as I thought I could cut that cable to exact length thus making the pull smoother. That did not work out. I cannot get the allen set screw to hold the cable tight enough. So I am back to OEM as this cable does NOT separate from valve and the 36" cable is pretty much the exact length I need anyway. As a tip, replace this at same time as other valves so you can loosen all valves and it gives just enough slack in pipe to move out of the way and slide the new one in.
Both valves matched up perfectly to the old valves in my 2008 Coachmen Chapparal trailer. Easier to install than I expected. Soooo nice to put water in the tank and have no leaks! One tip...put the seals onto the incoming/outgoing pipes before sliding the valve into place. Also, etrailer provides couplers on both sides of the valve. Those were easily removed and discarded and the valves fit perfectly into the existing pipe configuration. Love etrailer parts and support!
Eric was super helpful. TY
After 2 years probleme with my gray water tank valve on my travel traler micro mini Wenebago , its broke. Il take a look and it was a 6ft long cable and a few loop with the cable . Il need a 20 inch cable but il only find the 36 inch cable but just one loop and evry thing works grate after changing part. Very Happy.
Great product, works perfectly and shipping was very fast.
Was just what we needed to fix our fresh water tank dump value that was damaged by a repair shop when they were fixing hydraulics on the under belly
I received exactly what I ordered in a timely manner. Will be buying my TV parts for etrailer going forward
Perfect fit and exact replacement!
Don
4/23/2024
all is well
Easy to order. They let me know when it shipped and got here early. Parts were correct. Thank you
The parts good quality material and parts. Installed both valves in 90minutes. I will buy more product in the future.
Delivered in a coupe of days. Valve worked just right
Did not fit.
Mike L.
5/17/2019
This valve is designed for use with 1-12 inch diameter pipe for an RV gray water system.
It arrived early and worked perfectly. Thank you for upgrading the shipping so at no charge so I got it sooner
Exactly as described. Delivery in a very timely manner. Great company to work with, definitely recommend.
Good price and fast free shipping.
Smooth and fast transaction
Do you have a question about this RV Waste Valve?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
3/25/2021
A year out and over 3 months of actual use, and still working great. Valve operates better than the original during the same time period of use.