Replacement Cable-Actuated Waste Valve Options For A 2012 Keystone Montana  

What I think you are asking is if you can replace within a current system, a valve assembly of one manufacturer with that of another. Yes, the fitment of valve assemblies is industry standard in dimensions. A Valterra 3" can be replaced with…

It is likely the correct fix yes, and the replacement cable actuated waste valve you need is the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 36" Cable #34466N4AB36GM, 48" Cable…

You'll definitely need to straighten that line out otherwise you'll keep having issues with cable not wanting to fully close the gate. You can remove the four bolts that mount the gate valve to the pipe and see if turning it 90 degrees and…

Determining the correct replacement for your old waste valves is going to depend on the brand and length of your current cables. If you have Valterra branded valves you could reuse the cables you have and avoid rerouting new cables. You could simply…

Typically it's not going to matter since the bolts are just used to hold the valve body together, so the bolts holding your current waste valve together won't matter. If you waned to use the LaSalle Bristol Cable-Actuated RV Waste Valve for…

The Bristol Double RV Waste Valve #34466NDHR19AAA that you referenced does not have bayonet fittings for hoses to attach to like you are asking about. All of the fittings are designed to fit over sewer hose and permanently install with solvent like…

I contacted Jayco on what flush valves and cable lengths you have on your 2019 Jayco North Point Fifth Wheel. Your black water valve cable is 60" cable which we only offer in a 72". LaSalle Bristol Cable-Actuated RV Waste Valve - Black…

Thank you for the photos! Based on that it looks like you have a spigot to hub black water tank valve, like you mentioned, where the hub end fits over one pipe and the spigot end fits into the other pipe. So for a spigot to hub replacement valve with…

We've checked with LaSalle Bristol in the past and they do not offer just the replacement cables for their valves so you'd need to go with an all new valve with part #34466N4AB72GMA.

The LaSalle Bristol Cable-Actuated RV Waste Valve, #34466N4AB120GM is not designed to be trimmed. However, there are multiple lengths available: - 36" Cable #34466N4AB36GM - 48" Cable #34466N4AB48GMA - 72" Cable #34466N4AB72GMA -…

The longest sewer valve cable we offer is 10', the Valterra Cable with Valve Handle part #TC120PB which you then need to combine with the Valterra Waste Valve for RV Gray Water Tank part #T1001PBC since you can't use Valterra cables with…

Take a look at the picture I have included. You can see that the cable is secured to the valve using a set screw. So you would loosen that, pull out the old cable, put in the new one, and tighten the set screw back down. If your valve is set up the…