MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - White
(392 reviews)
Price: $70.80
In Stock
MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - White
Item # MA00-955001
Retail:$78.73
Our Price: $70.80
You Save: 10%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (392)
- Q & A (0)
- Photos
MAXXAIR RV Vents and Fans - MA00-955001
- Vent Cover
- Roof Vent
- 18-1/8W x 26-1/2L Inch
- MAXXAIR
- White
- Plastic
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.
Features:
- Roof vent cover for your RV or camper enables you to open the vent and operate the fan in any weather
- Allows air to circulate at all times, even when you're away or sleeping
- Keeps rainwater from entering and damaging RV interior
- Prevents heat buildup
- Designed for use with high-powered, high-speed fans
- Including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents
- Tall cover offers more roof vent lid clearance than other MaxxAir vent covers
- Wide vent area on the back of the cover maximizes airflow
- Less airflow restriction than standard vent covers
- Angled louvers allow smoke, odors, and stale air to escape
- EZClip pins make it simple to open or remove the cover for roof vent maintenance - no tools needed
- To open, pull pins out of the cover
- To close, slide pins in and push them up to lock in place
- Durable, high-density polyethylene construction is UV resistant
- Translucent material lets some light through
- Sleek, aerodynamic design reduces wind resistance
- Simple installation over roof vent with no need to drill into the roof of your RV or trailer
- No drilling required for installation on MaxxFan and MaxxFan Plus roof vents
- Mounts on frame of roof vent with included hardware
- Add-on bug screen (sold separately) keeps out insects and debris
- White color
- Made in the USA
Specs:
- Application: designed to fit over most standard 14" x 14" roof vents
- Designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs
- Can be used with high-powered, high-speed fans
- Overall dimensions: 26-1/2" long x 18-1/8" wide x 10-1/4" tall
- Inside dimensions: 25" long x 16-3/4" wide x 9-1/2" tall
- Vent area dimensions: 15-1/2" wide x 10-1/4" tall
- 6-Year limited warranty
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
Designed to work with high-powered roof vents, the FanMate cover offers superior rain protection so that the vent can be opened and the fan can be operated in any weather. The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance. And no drilling is required to install the cover over a MaxxFan or MaxxFan Plus vent.
Designed for High-Powered Vents
This FanMate cover is designed to work with any roof vent that has a high-powered, high-speed fan, including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents. The FanMate is also taller than other MaxxAir vent covers so that it can provide increased lid clearance, which allows you to open the dome of your roof vent more.
The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out.
EZClips Simplify Opening
This FanMate vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
Installation
The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents. No drilling or tools are required. The integrated mounting brackets on the FanMate perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this FanMate cover over any other roof vent, then drilling into the frame of the roof vent may be required. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Durable Construction
This vent cover is constructed of durable, high-density polyethylene. Special additives help ensure that the material can resist the negative effects of UV rays. And the cover is translucent so that some natural light can shine through.
00-955001 Max Air Fan Mate Camper Roof Vent Rain Cover - Model 855 - White
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - White - MA00-955001
Average Customer Rating: 4.7 out of 5 stars (390 Customer Reviews)
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.by: JD09/28/2021
etrailer exceeded my expectations again. The two MaxxAir vent covers were easy to assemble and install with the easy clips. Great product and great service.
by: Roy10/19/2021
I really like that this cover is extremely easy to install compared to the old style where you had to drill into the fan and fasten clips on to hold the cover. I had two issues; when ordering the etrailer experts did not know if this product would fit my fans. I called Maxxair and was given the information I needed. The holes in the covers where the clips mount were not drilled completely through. A small annoyance. The instructions for assembling the louvre to the cover body should have mentioned that you should start pushing the clips in from the two sides and then clip the center one.
by: Robert B05/20/2024
Vent covers fit on my MaxxAir vents just fine. Easy to install. The only reason for the 3 stars is poor packaging from etrailer. I ordered 2 covers. the single box was too small to fit both covers. One cover was deformed because of it. I was able use a heat gun to get it back into shape. The other was scratched on the top and all the mounting hardware for it was loose in the box. I guess that's what get for free shipping over $[XX].
by: Kurt04/08/2022
eTrailer.com had the best price for this particular vent cover. They also delivered promptly, so my overall experience was great. Will consider eTrailer.com in the future for parts for my 2000 Coachmen Spirit of America 248TB travel trailer.
Kurt O.
4/10/2023
Vent was easy to install over my vent fan. Functions as intended and provides ample cover and allows ample airflow for my fan.
by: steven04/22/2024
Matched up perfect. Thanks Kelly
by: Tony06/29/2023
Great customer service, the quality of this part is good. I’m sure it will help extend the vent life beyond the 20yrs that I got with the factory vent cover. Thanks Daniel at Etrailer for your suburb service.
by: Robert 06/01/2023
Delivery was very fast. Product in perfect condition.
Neighbor and I took down old unit and installed new in about 40 min. Plug and play as stated. Excellent so far.Moves more air than old unit.
by: Doug 05/17/2023
We love it, easy to put together and easy install on the roof of the 5th Wheel.
by: William08/18/2022
Had Fantastic Fan with rain-actuated auto-close lid, and it worked fine until the motor/gear drive assembly plastic mounts broke. Replacement system never mounted properly and didn't work, except manually.
On new RV, added Fantastic Fan with thermostat only and, to keep the rain out, added a Maxxair Fanmate vent cover. The pair of fan and vent cover fit well together when installing and the vent cover provides for efficient air flow according to many comments. Simple way to prevent 99% of rain from entering the RV. We love it.
by: Tom 07/19/2023
Perfect. Plenty of clearance to open power vent wide.
by: Richard10/18/2022
Easy installation and fit perfectly with the MAXXAIR FanMate RV Vents and Fan assy I also purchased from etrailer.com
by: Steven 11/11/2023
Works great and easy to install. Was delivered very quickly.
by: Michael 05/26/2020
Fanmate Roof Vent Cover was simple to clip onto the MaxxFan Roof Vent. I would rate this 5 stars if the bug screen was included from the manufacturer, but it is sold separately.
Michael
5/27/2021
Cover is still in great shape after a year on top of our rig.
by: Matthew04/29/2023
etrailer is the best. Very fast shipping. Just what I needed.
by: Rob 03/16/2023
So far so good. Too bad the insect screens I ordered don’t work. These seem to be of good quality. Installing tomorrow.
by: David 11/19/2022
Fan cover was exactly what I needed and fitment was perfect. The service I get from the folks at etrailer is unrivaled.
by: Debby11/02/2015
This was a little hard to install, but we made it work for the power vent in our 5th wheel, great service on receiving this product.
Debby
11/2/2016
the vent is great and is still on our fifth wheel
by: Andy 08/20/2018
I got this to cover my Maxxfan. Easy assembly and install with the provided clips. Seems a little thin on material but better than an open or lost vent lid.
Andy
9/2/2019
Still good after a year baking in the Nevada sun. I like being able to have the vent open when driving or when its raining.
by: John B09/16/2022
What you need if you have a powered vent like Fantastic Fan! Fortunately, the website had enough information that I knew this is what we needed for the powered vent.
by: Charlie07/06/2023
Product wise haven't installed them but I believe they will be good. I just wish my order would have shipped together Instead of two different shipments.
by: John10/12/2021
I installed them on non MaxxAir vents so that we could have them open and not worry about rain or blowing the cover off going down the road. They have worked great so far for me over the year I've had them installed on my camper.
by: George 11/23/2021
Super easy to install if you already have a MaxxAir Fan! Only concern is the mounting points are plastic, versus the metal brackets that are provided for non MaxxAir fan. I am sure it will be fine. It will be nice to not to have to worry about rain and our vent being open.
by: TahoeWino06/11/2018
These were easy to install. It took longer to read the instructions and get a sense of what needed to be done than to do the job. They're built to snap right onto their own MaxxAir of fan. But the instructions for the stock bathroom fan and the FantasticFan for my rig worked fine. Hopefully, this means the end of downpours coming in through an open vent. :-)
by: Joslynn05/11/2022
These are perfect. They installed very easy compared to an old off brand set we had previously installed on an old travel trailer. We are able to keep our vents open in any weather and they work with our Max Air fans perfectly.
by: Troy05/27/2019
The covers don't allow the lid on my fantastic fan to fully open. The covers rattle in the wind. I paid more for these covers than the MaxxAir I Original Roof Vent Cover because the Mfgr said that the MaxxAir FanMate EZClip Vent Cover was the proper cover but they both fit the same and allow the cover to only open about half way. Twice the price and the fit the same. Dissapointing.
25
390
Show More Reviews
See what our Experts say about this MAXXAIR RV Vents and Fans
- Reusing Hardware From MaxxAir II Vent Covers on FanMate Vent CoversThe MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 will not connect to the Installation Hardware for MaxxAir II RV and Trailer Roof Vent Cover. This is due to the covers being different sizes and therefore the mounts in the FanMate are not as long as the MaxxAir II mounts. The FanMate is designed to clip on to the MaxxAir MaxxFan's that have the quick attach mounting tabs already included on their fans produced since 2015. So if you have those vents then you can utilize...
view full answer... - Reversible MaxxAir FanMate Roof Vent In WhiteFor a white MaxxAir roof vent you would want the part # MA00-04000K. Then for a rain cover to fit this roof vent we have the part # MA00-955001. While the roof vent I recommended does not have the mounting tabs you mentioned it will fit the cover.
view full answer... - Recommended Trailer Roof Vent Cover For a MaxxFan 4301kThank you for including the label for your vent fan. For your MaxxFan 4301k, I recommend the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001. This cover will fit your vent and is designed to work with the fan in your 4301k. This will allow you to leave your vent open and run the fan even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside. The cover is also available in smoke and black. - # MA00-955003...
view full answer...
- Maxxair FanMate Mounts Most Standard 14" X 14" Roof Vents Including MaxxAir
X
BracketsThe MaxxAir FanMate # MA00-955002 Cover will fit nearly all vents utilizing their vertical brackets. All necessary hardware is included. This cover is available in 3 colors; White is # MA00-955001, Black is # MA00-955002, and smoke tinted is MA00-955003. I have included links and videos.
view full answer... - Which MaxxAir Trailer Roof Vent Cover for MaxxFan Plus Roof Vent MA00-04000KThe MaxxAir Fan Mate RV/Trailer Roof Vent Cover, part # MA00-955001 is what you're needing. These vent covers are 100 percent compatible with your # MA00-04000K fans you purchased. They attach using included pins to existing mounting tabs on the fan's mounting flange. Bug screens, part # MA00-955203 are also available for the vent covers. I've linked you to a product demonstration video featuring the vent cover. We're glad to hear that you're happy with your purchase!
view full answer... - Will The Fan-Tastic Vent Roof Vent FV807350 Work With MaxxAir FanMate RV Roof Vent CoverI understand your concern with the vent lid of the Fan-Tastic Vent Roof Vent w/ 12V Fan, # FV807350 contacting your MaxxAir FanMate RV Roof Vent Cover, # MA00-955001. It will make contact as the Fan-Tastic Vent Roof Vent is 11-1/2" when open and the MaxxAir FanMate RV Roof Vent Cove is 10" tall. However, this has come up in the past, and per the manufacturers Tech Rep's, the Fan-Tastic Vent Roof Vent w/ 12V Fan, # FV807350 has a powered lid that is designed to stop when it meets resistance;...
view full answer... - Recommended MaxxAir MaxxFan Plus Vent CoverFor your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K, the MaxxAir FanMate Rain Cover is your best fit for fully functionality. These come in 3 colors: Smoke # MA00-955003 White # MA00-955001 Black # MA00-955002 This will allow your vent to fully open and not come in contact with the cover as they are designed for compatibility.
view full answer... - MaxxAir Vent Cover Compatible with Factory Installed Anchor PointsThe MaxxAir FanMate Rain Cover in Black # MA00-955002, smoke # MA00-955003, or white # MA00-955001 are confirmed to fit the rounded factory mounting points like you see on the attached photo. If you have the flat mounting anchor points like in the other photo, then the MaxxAir II RV and Enclosed Trailer Roof Vent Cover - Black # MA86JR will work great.
view full answer...
- Vent Cover For MaxxFan Roof Vent 4301KThis cover will fit. The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is designed to fit all of the 4000 Series MaxxAir Fans with 4 mounting tabs, including your MaxxFan Roof Vent w/ 12V Fan 4301K # MA00A04301K
view full answer... - MaxxAir Vent Cover for Fan with 4 Mounting TabsWe actually have a few different version of the white rain covers from MaxxAir. The MaxxAir II # MA76JR that you referenced comes with the pins. This is for applications where the roof vent has the mounting tabs on one side. Since you have the 4 mounting tabs on your MaxxAir 4000K you want the MaxxAir FanMate # MA00-955001 which comes with the 4 clips and the 4 brackets.
view full answer...
- Recommended Maxxfan Rain CoverTo add a rain cover to the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan item # MA00-04301M, you will want the MaxxAir FanMate RV and Trailer Roof Vent Cover Smoke item # MA00-955003 or item White # MA00-955001. The integrated mounting brackets on the FanMate line up with the mounting tabs that are molded onto the flange of the roof vent.
view full answer... - MaxxAir Vent Cover For 2013 MotorhomeAssuming you have a standard 14" x 14" vent on the top of your motorhome (we have no way of knowing what specific vent you have), you can use the MaxxAir FanMate vent cover, but you'll have to drill holes into the side of your vent with the included hardware instead of using the clips. So you can use any of the following, depending on the color you want: - Smoke: MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003 - Black: MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 -...
view full answer... - How To Use a Roof Vent Cover With An Auto Open Roof VentThe tallest roof vent cover we offer in white is going to be the MaxxAir FanMate RV and Trailer Roof Vent Cover part # MA00-955001 which is about 10-1/4" at its highest point. I will say that most of the auto-open roof vents will stop raising when they sense resistance so you may still be able to use the above or the Camco Aero-Flo RV Roof Vent Cover w/ Swing Open Lid part # CAM40421 that you referenced. However, if your roof vent does not stop opening when sensing resistance then your...
view full answer... - Can The MaxxAir MaxxFan Roof Vent Lid Be Open While Driving No, the lid for the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan # MA00-04301M has to be closed while driving. The workaround to this is to install the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001. This cover is designed specifically to fit over your vent to allow you to utilize your vent while traveling or in any inclement weather. It installs using EZClip pins that will simply slide through the four connection points already on your MaxxAir Vent.
view full answer... - Can You Install an RV Roof Vent Rain Cover on A Plastic Roof Vent?You are correct, most older roof vents and/or fans do have a galvanized steel roof flange that mounts to the top of the RV. The Camco Roof Vent Cover, # CAM40431, that you mentioned is often used with these style vents/fans as seen in our installation video. In recent years, many manufacturers have begun to use roof flanges made from sturdy plastic, including our friends at MaxxAir. I called my contact at MaxxAir to ask about drilling into the plastic flange. He assured me that their...
view full answer...
- Can the Rain Shield Mounting Tabs Be Removed From my MaxxAir MaxxFanThe 4 tabs on the side of your MaxxAir # MA99FR are designed to allow you to mount a rain shield like the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - White # MA00-955001. A rain shield like the # MA00-955001 allows you to have the fan vent open and pushing air even in the rain, and is a popular addition to vents. You could remove them if you don't plan on using a rain shield and it won't negatively effect the structural integrity of the mounting plate.
view full answer... - Availability of Fan Cover that Fits MaxxAir RV Roof Vent 4500KYes, the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is the correct cover for your MaxxAir 4500K fan that you have now.
view full answer... - Recommended Roof Vent Covers for a Trailer with Automatic Open Roof VentThe best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part # MA00-955002 for black, part # MA00-955003 for smoke, or part # MA00-955001 for white. The reason for this is because they have the tallest inside clearance measurements of 9-1/2". These will work just fine for your two standard roof vents but for the electric open roof vent, you will need to take a bit of caution. Judging from the photo it looks like it might not fit...
view full answer...
- Recommended MaxxAir Trailer Fan Compatible With FanMate Vent CoverThe pin in place rain cover you are referring to is the MaxxAir FanMate, and that cover is compatible with MaxxFan Plus fans. So what I recommend for a compatible fan with the best air movement is a 10-speed fan: - MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed # MA00-04500K The MaxxFan Plus # MA00-04500K is 10 speeds like I mentioned so you can choose the power of the air movement, and importantly, it is also reversible which means you can not only...
view full answer... - Need a Roof Vent Cover For Fan-Tastic FanI suggest the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25", # FVU1500WH. This is designed to fit all Fan-Tastic Vent trailer roof vents. It is common for the vent lid to make some contact with covers however, the # FVU1500WH, will open most of the way and allow 100% of air flow produced by the fan. There is the option of the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4", # MA00-955001 which is a little taller.
view full answer... - Fan-Tastic 8100TS Create a Breeze Fan Cover Replacement For your Fan-Tastic Create a Breeze Fan 8100TS I recommend the MaxxAir FanMate RV and Trailer Roof Vent Cover Item # MA00-955003 and the Bug Screen for MaxxAir FanMate Roof Vent Covers Item # MA00-955203 This will allow you to have your vent open even when it's raining without having to worry about water damaging your camper. They also make this cover in white if you would prefer that color item # MA00-955001 I've attached a video that goes over installation for you as well.
view full answer... - Recommended Reversible RV Fan Vent with Auto Lift, Rain Sensor and Wall ControlI have a solution for you, but I'm not aware of any RV fan/vent that actually has a wired wall control since these fans don't actually control any temperatures. However. the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-04500K does provide you with everything else you're seeking and comes with a handheld remote control that can be mounted on the wall with the included bracket, so you'll have a wall mounted control as well. The color...
view full answer... - Bug Screen For MaxxFan MaxxAir FanYou have a MaxxAir Fan but it would depend on your vent cover. If you have one of these # MA00-955001, # MA00-955002 or this one # MA00-955003 then you can use one of these two bug screens # MA00-955203 or # MA00-955202. The screen will go on the outside of the RV so the screen you were looking at # FVK2034-80 isn't what you're looking for.
view full answer... - Replacement Louver for MaxxAir FanMate RV and Trailer Roof Vent CoverYes, we have the Replacement Louver for MaxxAir FanMate RV and Trailer Roof Vent Cover in white, # MA94FR. And the Replacement Louver for MaxxAir FanMate RV and Trailer Roof Vent Cover, # MA10-955102 in black. We also have the Bug Screen for MaxxAir FanMate Roof Vent Covers. # MA00-955203 for smoke and # MA00-955202 in black.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Adam Y
Updated by:
Noah M
Written by:
Jacob W
Test Fit:
Shane H
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roy
10/20/2022
The covers are working fine. My comments about having to call Maxxair and a little better install instruction still stand.