Availability of Fan Cover that Fits MaxxAir RV Roof Vent 4500K

Question

Question:

Just installed a MAXXAIR 4500K MaxxFan. What is the right MaxxFan cover to go over that fan ? this fan already has the pegs through which you put the attaching cotter pins. The pins are 9inch apart thanks

asked by: Bob G

0

Expert Reply:

Yes, the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is the correct cover for your MaxxAir 4500K fan that you have now.

expert reply by: Jameson C

0

Answer 1

The Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers #MA10-20121 are the correct bug screens for a MaxxAir II Vent Cover. The screens just snap into the cover for an easy installation.

view full answer...

Answer 2

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA26JR that you referenced can be used with the MaxxAir MaxxFan Plus #MA00-04500K that you are interested in. You may know this already but the #MA00-04500K comes with a rain sensor that will…

view full answer...

Answer 3

The optional bug screen is #MA00-955202 for the MaxxAir FanMate Rain Cover #MA00-955002. I have linked a video review for you.

view full answer...

Answer 4

For a vent cover, I recommend the MaxxAir Standard Vent Cover - Smoke #MA00-933067 or the MaxxAir FanMate Rain Cover - White #MA00-955001 depending on the style preference and the flange design. Color options are available for each option.…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 12

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Availability of Fan Cover that Fits MaxxAir RV Roof Vent 4500K

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching