Reversible MaxxAir FanMate Roof Vent In White

Question

Question:

max air has a clip on cover part number 00-955001 this new cover clips directly to the frame, no brakets. you have the 00-04301K White Roof Top MaxxFan with Mounting Tabs, which is exhaust only. what is the part number for the intake and exhuast version, in white, with mounting tabs?

asked by: Dale B

0

Expert Reply:

For a white MaxxAir roof vent you would want the part # MA00-04000K. Then for a rain cover to fit this roof vent we have the part # MA00-955001. While the roof vent I recommended does not have the mounting tabs you mentioned it will fit the cover.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at MaxxAir who said that if you lost the remote to your MaxxAir fan there is no programming that has to be done when using a replacement remote. Part #MA00A01150K is already compatible with all MaxxAir fans that have…

view full answer...

Answer 2

If you already have a MaxxAir roof vent on your RV you can pretty easily replace it and upgrade to the #MA00-04000K as this fits the same size mounting hole. There's no reason you couldn't use your current roof vent cover as well as long as…

view full answer...

Answer 3

The only way to operate the MaxxAir MaxxFan Trailer Roof Vent #MA00-04000K without rain getting inside is to also install the MaxxAir II Rain Cover #MA76JR. If you are wanting a single-piece unit that includes a rain cover and utilizes a thermostat…

view full answer...

Answer 4

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 5

The MAXX AIR II Vent Cover #MA86JR also listed as part number 00933082 that you referenced does not come with a bug screen built into it nor is there one available for it.

view full answer...

Answer 6

The Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers #MA10-20121 are the correct bug screens for a MaxxAir II Vent Cover. The screens just snap into the cover for an easy installation.

view full answer...

Answer 7

The MaxxFan Dome Plus Roof Vent w/ 12V Fan #MA00-03810B only draws 2 amps.

view full answer...

Answer 8

The Mounting Bracket #18136 can be used with a round hitch cross bar as well as square. I have included an image below showing the bracket on a round cross tube. You will then be able to secure your 4-Way Mounting Bracket #18144 or 7-Way Mounting…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Reversible MaxxAir FanMate Roof Vent In White

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching