Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
Designed to work with high-powered roof vents, the FanMate cover offers superior rain protection so that the vent can be opened and the fan can be operated in any weather. The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance. And no drilling is required to install the cover over a MaxxFan or MaxxFan Plus vent.
This FanMate cover is designed to work with any roof vent that has a high-powered, high-speed fan, including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents. The FanMate is also taller than other MaxxAir vent covers so that it can provide increased lid clearance, which allows you to open the dome of your roof vent more.
The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out.
This FanMate vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents. No drilling or tools are required. The integrated mounting brackets on the FanMate perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this FanMate cover over any other roof vent, then drilling into the frame of the roof vent may be required. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
This vent cover is constructed of durable, high-density polyethylene. Special additives help ensure that the material can resist the negative effects of UV rays. And the cover is translucent so that some natural light can shine through.
Average Customer Rating: 4.7 out of 5 stars (383 Customer Reviews)
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.
I'm generally happy with these vent covers except for the quality of the included fasteners. The install was easy but I did over tighten and break one of the included screws. Unfortunately despite that I also lost one of them due to hardware backing out while I was driving so I have been checking the remaining vents every few hundred miles. At some point I plan to replace the hardware with something that I can tighten a bit better and locktite on to prevent that happening again.
EXCELLENT!
I bought this Maxxair Fanmate vent cover for my RV kitchen vent. Now I can leave the vent open without worrying about rain or bugs getting inside my 5th wheel. You can see through the smoke colored plastic like looking through a cool skylight.
I bought two. One justed clipped on because it already had the Maxxair bracket installed from Grand Design. The other I will have to install the bracket that came with the vent cover! Looks Great!
We purchased these 6 months ahead of the arrival of our new trailer with 2 Max Air fans. At the time, no one had the transparent/smoke ones in stock, so we wanted to get ahead of supply chain issues. etrailer had them, and we received them quickly.
Had the trailer dealer install them and two others on the new trailer, so they could do any caulk work if needed. These are fantastic, in that you almost can't tell they are on the fan. A bit of tint, but otherwise crystal clear, and we never worry about leaving the vent covers open while travelling, or in inclement weather. etrailer is our go to for as many of our RV supplies as we can get from them, instead of the "A" company. Great customer service, good prices, and speedy shipping.
Kevin B.
10/15/2023
2nd camping year, and the vent covers are all working well. Vents are led open all the time, including while driving. The only time we even close them anymore is if there is a hard driving rain.
Mike L.
11/7/2023
They seemed too large at first, but once I got up there, they fit perfectly. Had one vent already prepped for a cover. Installed in seconds. The other vent required I use the included brackets. Still quick and easy, with the use of a drill and reading the included instructions.
Joseph R.
1/27/2023
Over a year and no leaks or other issues.
Whenever I am looking for accessories or parts for our RV or vehicles I first check to see if etrailer has the item. As usual etrailer service and shipping were excellent. The plastic vent covers were well packaged and arrived in excellent shape.
Fast service. Shipped a replacement for damaged vent screen within hours of my reporting it. Love working with etrailer!
I was informed by my local RV parts folks, that this item wasn't available in the smoke color. I also coudn't find it on the Mfg website. So, I decided to try etrailer and sure enough, there it was!
These vent covers are easy to put together and to install. It took right around 30 min to install all three in about 40 degree weather. The vent guards remained pliable and easy to install. Would definatly recommend.
Easy Install works perfectly on our 2020 open road
Steve
11/25/2023
Good as new, still looks like I just installed them !!!
Mike L.
11/26/2023
My vent cover arrived today and in a couple hours was installed on my trailer. Cover arrived without any defects and the instructions provided made the installation process easy. This cover allowed my vent to be opened fully. Since the product is smoked, in color, it allows plenty of light into our trailers bathroom.
I purchased this for my new MaxxAir fan. Works great!
Easy to install. 6 year manufactures wa rranty.
Easy to put together and install. Only issue: Because it rests on the dicor around the fan installation, it's about an inch above the front A/C unit, which raises our camper height an inch. Just something to be aware of when driving under low bridges.
The vent cover fits as advertised. Absolutely no issues with installation. I have had it installed for over a year and just finished my bi-yearly outside rig cleaning where I clean the roof and sides. While on the roof I conducted my seal inspection and there are no apparent cracks or leaks. Highly recommended.
Quick on the shipping. Everything showed up in great shape. Ordering online with etrailer was very simple and fast.
covers the fan.
Have not installed the rain cover yet so cannot speak to that process. It appears to be a good quality product. It seems to be a bit flimsy toward the opening until it is fully assembled and mounted on the roof vent. It then becomes rigid and I don't expect any problems in that area. When mounted on the roof vent it has a gap between it and the roof itself. I understand that is to allow the area inside the cover to air out thus reducing the chance of condensation related problems. I do have one concern and that is the gap on the front. That may allow to much air to flow through when traveling at road speeds causing the back (the louvered area) to open. Most likely the engineers have foreseen this possibility and it will not a problem, I hope. I especially like that it is "Made in the USA". I feel that it has some measure of quality control which is comforting. As with anything made to withstand the outdoors only time will tell the whole story. I gave it 4 stars due to it's appearance, fit, and finish. Hopefully it will earn the 5th star for longevity. etrailer earns all 5 stars.
Wayne B.
5/18/2018
My rain cover is the best! It has held up to our central Florida sun very nicely. It still looks new. It mounts very easily with little effort provided you have the matching vent fan. I did not need to use the provided mounting hardware for my installation. It simply fits over the tabs on the roof vent fan and fastens with the provided slide in pin locks. There is no more concern about its performance. Its a little pricey but a great product. I believe it will last for several years so I can now award the 5th star.
Just received them yesterday, but they look perfect and exactly what we need to cover our fans.
The product does not sit down on the trailer as far as i thought it would withe fan tabs leaving a gap on the bottom sides. Not sure bugs and wasps could not just fly in the area. Other than that,, installed okay and looks nice
Steven M.
5/26/2018
Works and looks great after a year of use.
We really like the vent cover. Our Maxxair fan has a rain sensor but with the vent cover we can run the fan in any weather.
I have put these on the last 3 campers that I have owned. After I lost the factory vent cover on my first camper I decided to put the MaxxAir covers on and havent regretted it once. This particular cover is for over you high output fan. It works great and allows good air flow. Easy installation too. I intalled 4 on my camper in about 30 minutes. I would recommend to any rv owner. I have bought all my covers from etrailer. Best price and fast delivery with nothing damaged.
Ordered 2 of these to cover 2 new MaxxAir fans I installed in our Keystone Outback. The FanMate covers fit well over the MaxxAir fans using their proprietary mounting tabs - it took longer to climb the ladder to the roof than to install these on the tabs. I paid more to get the smoke cover and am glad I did - it lets in much more light than the white versions from my old fans. The reason I'm only giving 4 stars is price - the smoke is even more expensive than the already expensive white MaxxAir FanMate covers. I didn't want to drill into the new fan frames and liked MaxxAir's quick disconnect mounts so I sucked-up the cost. etrailer, as usual, provided excellent service and fast shipping. When I discovered the box was missing mounting hardware for one of the covers, etrailer was on it - I received a personal reply and follow-up to ensure I received what I needed. Thanks etrailer!!!
Installed in under 5 minutes on my 2021 Jayco that already had the mounts for the pins.
Goes great with a newer style max air fanmate. This vent cover allows my camper to vent while its raining outside. The vent lid does hit the top of the inside but shouldn't impede on the fan's operations. Its also super easy to install if you have the max air fans with the EZ clips. It does provide hardware for other applications if you have to screw yours in. I have both the smoked and the opaque white version. The smoked does provide just a tad more natural light coming into your camper but not much more than the opaque white version. Just get the color to match the rest of your vent covers and youre good to go! I wish it included the bug screen, which is a separate purchase.
I purchased two MaxxAir FanMate Rain Covers for my new fifth wheel.
One installed on a MaxxAir MaxxFan. It clipped right into place installing in minutes.
The second unit installed on a standard roof vent. I needed to mark and drill four holes in the vertical metal flange. This had no impact to the roof seals at all. It was handy to remove the screen from the vent so my assistant could hand tools to me from the bathroom below. Very easy to install.
Why I purchased: I had MaxxAir Rain Covers on the travel trailer that I just traded in. When the factory lids of the vents became brittle and crumbled during winter storage, the MaxxAir Rain Covers kept the inside of my trailer dry. No water damage with two roof vent lids completely gone! Highly Reccommend.
These Fan covers are a Great for leaving your fans open all the time, But with the Maxx Airauto fans it is not tall enough for the Full open action. The fan pushes up on the cover when full openis activated. This really isn't a problem, but I'm sure if it puts pressure on the vent motor when opening? Would I Buy again..... YES ,They are a Great Vent Cover.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark T.
8/27/2019
One year later, the Maxxair smoke color vent covers are a must have upgrade for your RV. If you leave your vent open, no problem Maxxair has it covered. No pun intended! Rain, wind, and bug proof! Not to mention they look great! I definitely recommend Maxxair products!