3" Slip Hub For A 3" RV Waste Valve
Question:
Hello, As with most cable valve systems. They start to leak over time. I want to add a new dump valve by the hose connection so when I remove the cap nothing comes out. I want to cut the existing 3 inch pipe and add the valve into the middle of it. Can I take the new T40 valve remove the flange on one side and install the T1005 on the valve and then put directly inline with the 3 inch pipe? I believe this will now give me a 3inch slip hub on both ends of the valve to go over my existing 3 inch pipe on both sides of the valve. Thanks for your help.
asked by: Matt B
Expert Reply:
You can do that, however the mounting holes on # T1005 are a bit too close together, and won't properly mount to the Valterra Bladex Waste Valve for RV Black Water Tank # T40.
Instead, I recommend using the LaSalle Bristol RV Sewer Slip Hub with Flange # 34466V13 which has a farther apart mounting hole location.
To properly secure these items together, you're also going to need some solvent # 3447530889 .
Products Referenced in This Question
LaSalle Bristol RV Sewer Slip Hub with Flange - 3"
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- Slip Hubs
- Hub
- Sewer Pipe to Waste Valve
- 3 Inch Diameter
- LaSalle Bristol
more information >
LaSalle Bristol ABS Solvent Cement - Black - 1/2 Pint
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- ABS Cement
- LaSalle Bristol
more information >
Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 3 Inch Hub
- Stationary Valve
- Valterra
more information >
Product Page this Question was Asked From
Valterra RV Sewer Slip Hub with Flange - 3"
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- Slip Hubs
- Hub
- Sewer Pipe to Waste Valve
- 3 Inch Diameter
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Mount-n-Lock Heavy-Haul'r Replacement RV Bumper - 5.3" Wide - 600 lbs - Glossy Black
- Shop: Patriot Hitches Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop - 7K
- Search Results: hitch bar
- Shop: Trailer Hitch
- Shop: Buyers Products RV Universal Receiver Hitch
- Shop: Curt Hitch Extender for 2" Hitch Receivers - 8" Long
- Shop: Curt 2" Trailer Hitch - Bumper Mount - 8-3/4" Bolt Pattern - 5,000 lbs GTW
- Shop: Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: Types of Trailer Hitches: How and Why to Use Each
- Search Results: tow bar
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Shop: Trailer Wiring
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Search Results: trailer hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Search Results: 90160
- Video: etrailer Hitch Pin Alignment Collar Review
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Video: Choosing the Right Brake Controller
- Shop: Base Plate for Tow Bar
- Article: How to Measure for Trailer Hitch Drop
on RV Sewer Hose Fittings
