Installation Hardware to Install a Refrigerator Vent Cover

Question

Question:

My fridge vent for rooftop did not come with any hardware screws.

asked by: Roxianne F

0

Expert Reply:

The RV Refrigerator Roof Vent Cap and Base # DMC37FR comes with the vent cap and the base. Installation hardware is not included.

We do have installation hardware available. The Camco RV Vent Installation Kit # CAM25013 if you have a rubber roof or the Camco RV Vent Installation Kit # CAM25003 if you have a metal roof. You would also want some LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1.

We also have the Roof Vent Installation Kit # 344270KITW which includes the installation kit and sealant. This kit works for aluminum, brass, steel, glass, mortar, wood, PVC, EPDM, TPO, and TPV roofs.

expert reply by: Scott S

0

Answer 1

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 2

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 3

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson #LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture…

view full answer...

Answer 4

Thank you for the pictures of your overload springs. Since you actually have upper overload springs and not lower overload springs you will instead need the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7202. These will…

view full answer...

Answer 5

There are a couple things to consider between using the Torklift StableLoad #TLA7200 and air bags on your 2022 Ford F-350 Super Duty when transporting your in-bed camper. If you are just looking to decrease sway, the Torklift StableLoad #TLA7200 is a…

view full answer...

Answer 6

The Camco RV Refrigerator Vent Cover #CAM42163 is likely a fit for your roof vent base since it fits a base with a 5-1/4" x 24" base. These vent covers are designed specifically to fit Dometic and Norcold vents so you shouldn't have an…

view full answer...

Answer 7

LaSalle Bristol RV Plumbing Roof Vent #34474558B is made to fit on RV pipes with an outside diameter of 1-1/4-inches or 1-1/2-inches. The actual hole diameter through which the RV vent pipe will extend measures 1-7/8-inches as shown in the photo I…

view full answer...

Answer 8

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

view full answer...

Answer 9

Hey Bill, great question! The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1116 and 1716 - 30,000 lbs - 4.5K TW #GY45SR will fit in place of your MORryde RPB72-1716, but you'll want to verify that the 4.5K TW rating is best for your…

view full answer...

Installation Hardware to Install a Refrigerator Vent Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching