Solera RV Slide-Out Awning - 121" Wide - Black
(1106 reviews)
Price: $491.64
Solera RV Slide-Out Awning - 121" Wide - Black
Item # LCV000182037
Retail:$854.49
Our Price: $491.64
You Save: $362.85
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1106)
- Q & A (0)
- Photos
- Used (1)
Lippert RV Awnings - LCV000182037
- Slide-Out Awnings
- 116 Inch Wide
- 117 Inch Wide
- 118 Inch Wide
- 119 Inch Wide
- 120 Inch Wide
- 121 Inch Wide
- Black
- Extends 48 Inches
- Lippert
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 10'1" from edge to edge. Includes all necessary components.
Features:
- Protects your RV slide-out from damage from clogging leaves, debris, and pooling water
- Prevents water damage and mildew
- Blocks out sun to help keep the RV cool
- Extends and retracts with your slide-out automatically
- Made of heavy-duty, durable fabric with premium 13.5-oz vinyl
- Won't crack in cold temperatures
- Prevents leaks with heat-welded seams
- Includes brackets, hardware, and awning rail
- Black awning fabric matches black hardware
- Made in the USA
Specs:
- Application: slide-outs 116" - 121" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 121" long
- Awning fabric (when fully extended): 121" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000182037 Lippert Solera 10'1" Slider (Slide-Topper) in Black w/ Black Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Customer Reviews
Solera RV Slide-Out Awning - 121" Wide - Black - LCV000182037
Average Customer Rating: 4.6 out of 5 stars (1106 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 10'1" from edge to edge. Includes all necessary components.by: Kenneth04/14/2024
Install was by the book. It took two people but was easy.
by: Wade05/05/2023
Excellent quality. Support to assist with proper size was awesome. Easy installation. Couldn’t ask for anything better. Always a pleasure working with etrailer
by: Bles03/13/2021
It's been a year since we've installed our Solera RV Slide-Out Awning. The product is excellent and works exactly to its specification. And I can't say enough about our Representative, William B, who assisted us with this order. We were unsure of the part to order. William was very knowledgeable, professional and quick to respond to all our questions. Thank you. Your company will be the first I reach out to the next time I'm in need of a part for our RV.
by: Umberto02/16/2018
Love my solera slider topper. Keeps the slider clean and dry and the rubber gasket soft like new. After a year parked outside in the Florida sun it's still looking great!
Umberto
2/16/2019
Still looks like new!. Works wonders protecting the slide out seal, and keeping the elements and debris out my slide out.
by: John03/31/2022
Works well. A little more difficult to install than I thought but doable. I’m 73 years old so that might have been a factor. lol
John
3/31/2023
It works great! Keeps the top of my slide out clean of debris!
by: TimA05/06/2021
This Solera slide out awning is well made and a good design making for a fairly simple and straightforward installation. Pretty much can install the unit with one person up to the point of slide the awning into the awning rail. The one issue I had, hence took one star away, was not enough awning rail screws were sent, I was short 11 screws, only sent 20. The instruction said to put a screw in very hole of the awning rail to camper attachment. So I drilled all the holes for that connection and then was short 11 screws to fill all the holes.
by: Larry 05/07/2023
Everything is working as described. Works well
by: Scott11/07/2019
Received quickly and in decent shape though the tube ends it was shipped in were damaged. The contents were all there, thankfully and an initial inspection seems to show no damage.
One thing to note: the newer awnings have the newer bracket types included that are preinstalled as “awning prep” that some RV companies like Forest River are providing on their campers, so there is no need to order the special bracket kit. This info should be added to the advertisement.
by: Charles02/04/2022
This was the first installation for me so I took time on the install and used the factory roof edge rail to attach the topper instead of one already in place or using the provided rail. This gained me about a half inch more height for better drainage.
by: Stevan05/19/2021
Item arrived quickly and undamaged all parts and instructions were there and went together and on the slide-out easy with no hassles. I would recommend dealing with etrailer for all your needs when it comes to your r.v or whatever else you have ill definitely deal with them again
by: Lonnie 08/23/2022
As usual, reliable, professional and promt service from etrailer!
by: Pat.S10/23/2017
After a year of use, the topper is still fantastic.
by: John04/23/2020
Best purchase I've made for my 5th wheel.
by: Steven01/06/2023
Took 3 weeks to get
by: Jason09/03/2020
These toppers are great and handle the wind well.
by: Jerrett G.07/05/2019
Perfect fit and easy installation!
by: Darrell 03/22/2021
Darrell
3/23/2022
still looks new and works great
by: Kelly 03/12/2024
by: Sandra 03/18/2024
by: Stephen09/11/2023
by: Joseph12/12/2023
by: E06/17/2021
by: Mike 11/26/2023
by: Tim 09/11/2022
by: Paul 04/02/2021
25
947
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- Recommended Slide Topper for Grand Design Transcend 29TBS with 118 Inches Flange to FlangeFor your Grand Design Transcend 29TBS the slide topper I recommend for your 118 inch flange to flange measurement is the Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037. This slide topper is designed for a box width from flange to flange of 116 to 121-3/4 inches. This will fit your slide out perfectly. It is also available in white with white hardware # LCV000163293. These awnings come with all the awning rail included.
view full answer... - Correct Slide-Out Awning For a 120" Wide Slide-OutIf the 120" measurement you get is from the outside flange to outside flange (the correct way to measure), then the Solera RV Slide-Out Awning # LCV000182037 is the correct awning. The 5" you are referencing isn't the awning to rail, but actually the awning to slide-out box overhang. The Solera RV Slide-Out Awning # LCV000182037 is the correct option if you get a measurement between 116" - 121" wide outside flange to outside flange.
view full answer... - Recommended Slide Out Awning and Installation HelpThe Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037 is designed for slide out boxes that are 116 inches to 121-3/4 inches when measured from flange to flange. These measurements are found on each of the product pages so you can ensure the correct fit for each slide out. I've linked the page to all your options to help if another size is needed. They will work well to keep rain and debris out of the slides. I've attached some videos to assist with the installation...
view full answer...
- Correct RV Slide Out Awnings for Trailer With 81", 116", and 122" SlidesThe correct Solera RV Slide-Out Awning for this trailer are as follows: 122-1/4" : part # LCV000168326 or part # LCV000163294 116-1/2" : part # LCV000182037 or part # LCV000163293 81-3/4" : part # LCV000165062 or part # LCV000163287
view full answer... - Slide Out Awning for 127-1/4 inch Awning with 6.5 inches from Flange to Awning ArmYou are correct, the slide topper you are wanting would be the Solera part # LCV000182037 that you referenced. This would be the correct size based on your flange dimensions as well as the clearance you mentioned.
view full answer... - RV Slide Out Awning for Winnebago 26RKWhen picking out a slide topper for an RV like your Winnebago you want to measure the width of the flange that runs around the slide out and use that as a way determine what you'd need. So for the 118 inch flange width (assuming that's what you measured) you'd want the part # LCV000182037. For the smaller slide out you'd then need the # LCV000421394. This size is only available in black, but picking the color is really just which you prefer. Since this one is only available in black the...
view full answer... - Recommended Black Solera Slide Out Awnings For An 86 And 117 Flange To Flange MeasurementFor a 117" measurement you would need the Solera RV Slide-Out Awning # LCV000182037 to get the black fabric. For the 86" measurement you would need part # Solera RV Slide-Out Awning # LCV000168106. I recommend picking up some butyl tape # AL28FJ to prevent water from leaking into the walls of your trailer through the mounting screws.
view full answer... - Correct Solera RV Slide-Out Awning for 2020 Forest River Catalina SBX 241RLSThe correct Solera RV Slide-Out Awning for a 121" slide-out (flange to flange) on a 2020 Forest River Catalina SBX 241RLS is part # LCV000182037 for black or part # LCV000163293 for white. In regards to adding a spacer between the trailer and extension rod barcket, I don't see too much an issue with this so long as you have the hardware attached to the backing but you may need longer screws worse case. That said, I would see if modifications can be made to the refrigerator vent first. If...
view full answer... - Correct Solera Slide-Topper for 119.5 inch Slide-Out on 2020 KZ Half-Ton DurangoFor your 119.5" slide out on your 2020 KZ Half-Ton Durango you need a 10'1" Solera Slide-Out Awning which comes either in Black # LCV000182037 or White # LCV000163293 depending on what you'd rather have for your application. Some of the info regarding awnings can be a little confusing because it seems like they are always changing the rules on us so I definitely understand where you are coming from. The 10'1" awnings are designed for slide outs that measure 116" - 121" wide which is the...
view full answer... - How To Figure Out If Your Can Offset Slide-Out Awning And Still Use Factory Installed RailThat'll depend on the size of the rail the factory installed on your camper. If the rail is wider than your slide topper you should be able to offset the slide-out awning as needed, but if it's exactly the size of the slide-out, you'll need to use a size smaller awning to give you clearance on the one side. You didn't mention the size of your slide but if you can measure your slide out outside of flange to outside of flange I'd be happy to recommend the correct option for you either way. For...
view full answer... - Size of Brackets For Solera RV Slide Out AwningWithout knowing the exact size of the current brackets I don't know if they will cover them. However the Solera RV Slide-Out Awning # LCV000182037 has mounting brackets that are 7 inches long, and the mounting surface is just over 1 inch before it curves outward for the rod. I attached a photo so you can compare it to the brackets on your 2013 Thor Tuscany. If you are replacing the slide topper you want to measure properly so that you get the best fit you can. You'll want to measure from...
view full answer...
- Slide Out Toppers For 2017 Keystone Raptor Toy HaulerWhen looking for slide out toppers you need to make sure you get ones that have at least 2.5 inches of overhang on each side of the slide out. For your two slide outs I recommend the Solera RV Slide-Out Awning - 8'7" Wide - 48" Projection - Black # LCV000168108 and the Solera RV Slide-Out Awning - 10'1" Wide - 48" Projection - Black # LCV000182037
view full answer... - Picking Out Slide Topper for 2018 Grand Design 2800BHWhen picking out a slide topper for a travel trailer the key is to measure the width of the box including the flange that runs around the outside of it. Since we don't have a way to determine that dimension on your 2018 Grand Design 2800BH I'd need to you to measure yours and then get back to me with what you have. For example, the part # LCV000182037 would fit a flange width range of 116 to 121 inches.
view full answer... - Recommended Rail to Attach Awning or Slide Out Topper to Camper or RVThe Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037 comes with the awning roll bar rail and also the rail extrusion that attaches to the RV.
view full answer... - Solera RV Slide-Out Awning RecommendationsFor an RV with a slide that measures 116" from flange to flange on the outside of RV, you will want to order the 10-1/2' awning, # LCV000182037 for black or # LCV000163293 for white. This will provide you with and actual awning fabric (when fully extended) that is 121" wide providing 2-1/2" of overhang each side; which is the minimum suggested length. Please see the attached review and installation videos.
view full answer... - Slide Out Toppers For A 2022 Forest River Salem Hemisphere We have what you need. Just so you have the information. You need to have at least two and a half inches of overhang on each side of the topper. Using the measurements you provided I added 5 inches to them to get the proper fit for your 2022 Salem Hemisphere 5th wheel. You will need the Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106. The Solera RV Slide-Out Awning - 9'7" Wide - 48" Projection - Black # LCV000251461. And the Solera RV Slide-Out Awning...
view full answer... - Clearance Needed to Install Solera Slide Out Awning LCV000184673Thank you for the photo, and I can tell you that the Solera RV Slide-Out Awning - 11'1" Wide # LCV000184673 does require at least 7 inches of clearance in order to install. Unfortunately, there is just no way to shorten the awning, so the best we can offer is a different size that you can use. Since the awning brackets stick out approximately 2-1/2 inches past the fabric you will want to consider that as well when deciding the proper length. - 127 Inch Wide Fabric: Solera RV Slide-Out...
view full answer...
- How to Measure for Solera RV Slide-Out Awning on 2022 Grand Design Reflection 260RDThe slide-out on your 2022 Grand Design Reflection 260RD will need to be measured to determine the correct Solera RV Slide-Out Awning. To ensure you get the correct size for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage. The # LCV000182037 you looked at fits slide-outs...
view full answer... - What to Measure to Find Correct Slide-Out RV Awning I can tell you how to measure for the correct slide out awning, and it's actually really simple and will only take a moment. So all you need to do to determine the correct slide-out awing is simply measure the entire width - from outside flange to outside flange - of your slide out and that's it. For example, if you measured, and the width - including the flanges - was between 116" and 121" wide you would need the Solera RV Slide-Out Awning - Black # LCV000182037 or White # LCV000163293. I...
view full answer... - Size of Brackets of Solera RV Slide-Out AwningThe size of the brackets of the Solera RV Slide-Out Awning # LCV000182037 is 1.05" from the bottom of the bracket to the top of the rivet hole. With 2-3/4" of space from the top of the vent to the top of the slide you will have more than enough room to mount the awning. This particular awning will fit RVs with slide-outs 116" to 121" wide and up to 48" long. I have added a link to our entire selection of awnings in case you need one that is a different size, and also added a link to a...
view full answer...
- Can Solera Slide Topper Fit if Awning Rail is Within 6 inchesSince you have 6-1/2 inches of clearance from the slide out flange to the awning rail that you mentioned the Solera Slide Topper # LCV000182037 will fit and work great. We've asked Solera about this in the past and they've said that the minimum clearance is 3 inches so you have more than enough.
view full answer...
- Recommended Slide-Topper for 2017 Grand Design Imagine RVFor your camper slide-out that has an outside width of 116.5 inches, I recommend looking at the Solera 10.5 Ft Slider in Black # LCV000182037 or White # LCV000163293. This Solera Slider is 126 inches wide and has a box width range of 116 to 121-3/4 inches. Box width is measured on the outside front of the box, including flange. You just want to select a size that extends a minimum of 2-1/2 inches beyond each side of your slide box width. I have attached a demonstration video of this product...
view full answer... - Solera Slide Toppers Available Sizes and How To Measure On a Jayco Eagle Travel TrailerTo find the toppers for your Jayco Eagle HT 2835RSTS you will need to measure your 3 slide outs. The measurement will be from outside flange to outside flange. If you don't have at least 7" of clearance on both sides of your slide-out box, order the next size down. I can help you determine the correct size if you can send me the measurements of each of your slides along with images so I can help determine if any awnings or other items might be in the way. Solera RV Slide-Out Awning 57"...
view full answer... - How To Choose the Correct Solera RV Slide-Out Awning for a Grand Design Solitude 310GKIn order to choose the correct Solera RV Slide-Out Awning for a Grand Design Solitude 310GK you'll need to measure the slide-out from the edge of each flange. I have attached a list of all options below. That said, I am not able to look up the correct slide-topper for any one particular trailer since we have no way to reference the slide size since this information simply isn't published by the manufacturer. The Solera RV Slide-Out Awning part # LCV000182037 for example fits a slide-out...
view full answer...
Do you have a question about this RV Awning?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor scratches and dings on the end caps and the fabric from test fit.
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
John S
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
Rick G
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Carrie F
Updated by:
Amanda K
Installed by:
Randy B
Written by:
Kristen H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Kevin C
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bles
3/15/2022
Still working and in excellent condition.