RV Slide Out Awning for Winnebago 26RK

Question:

I HAVE 2 SLIDE OUTS ON MY 2013 WINNEBAGO 1, 26RK. THE FRONT SLIDE CLOSET IS 47 INCHES EDGE OF FLANGE TO EDGE OF FLANGE. THE OTHER SLIDE IS 119 INCHES. WHICH MODELS SHOULD I CONSIDER?

asked by: JOHN M

Expert Reply:

When picking out a slide topper for an RV like your Winnebago you want to measure the width of the flange that runs around the slide out and use that as a way determine what you'd need. So for the 118 inch flange width (assuming that's what you measured) you'd want the part # LCV000182037.

For the smaller slide out you'd then need the # LCV000421394. This size is only available in black, but picking the color is really just which you prefer. Since this one is only available in black the other one I mentioned is black as well.

expert reply by: Jameson C

John M.

3/16/2020

I HAVE 2 SLIDE OUTS ON MY 2013 WINNEBAGO 1, 26RK. THE FRONT SLIDE CLOSET IS 47 INCHES EDGE OF FLANGE TO EDGE OF FLANGE. THE OTHER SLIDE IS 119 INCHES. WHICH MODELS SHOULD I CONSIDER?

Jameson C.

3/16/2020

Thanks for clarifying that the measurements that you gave earlier were flange dimensions as that's the number needed. The two models I mentioned in previous answer would still be correct.